1 /* 2 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the Boundary Devices Nitrogen6X 5 * and Freescale i.MX6Q Sabre Lite boards. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #include "mx6_common.h" 14 15 #define CONFIG_MACH_TYPE 3769 16 17 /* Size of malloc() pool */ 18 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 19 20 #define CONFIG_MISC_INIT_R 21 #define CONFIG_USBD_HS 22 #define CONFIG_USB_ETHER 23 #define CONFIG_USB_ETH_CDC 24 #define CONFIG_NETCONSOLE 25 26 #define CONFIG_MXC_UART 27 #define CONFIG_MXC_UART_BASE UART2_BASE 28 29 #ifdef CONFIG_CMD_SF 30 #define CONFIG_MXC_SPI 31 #define CONFIG_SF_DEFAULT_BUS 0 32 #define CONFIG_SF_DEFAULT_CS 0 33 #define CONFIG_SF_DEFAULT_SPEED 25000000 34 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) 35 #endif 36 37 /* I2C Configs */ 38 #define CONFIG_SYS_I2C 39 #define CONFIG_SYS_I2C_MXC 40 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 41 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 42 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 43 #define CONFIG_SYS_I2C_SPEED 100000 44 #define CONFIG_I2C_EDID 45 46 /* MMC Configs */ 47 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 48 #define CONFIG_SYS_FSL_USDHC_NUM 2 49 50 #ifdef CONFIG_MX6Q 51 #define CONFIG_CMD_SATA 52 #endif 53 54 /* 55 * SATA Configs 56 */ 57 #ifdef CONFIG_CMD_SATA 58 #define CONFIG_DWC_AHSATA 59 #define CONFIG_SYS_SATA_MAX_DEVICE 1 60 #define CONFIG_DWC_AHSATA_PORT_ID 0 61 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 62 #define CONFIG_LBA48 63 #define CONFIG_LIBATA 64 #endif 65 66 #define CONFIG_FEC_MXC 67 #define CONFIG_MII 68 #define IMX_FEC_BASE ENET_BASE_ADDR 69 #define CONFIG_FEC_XCV_TYPE RGMII 70 #define CONFIG_ETHPRIME "FEC" 71 #define CONFIG_FEC_MXC_PHYADDR 6 72 #define CONFIG_PHYLIB 73 #define CONFIG_PHY_MICREL 74 #define CONFIG_PHY_MICREL_KSZ9021 75 76 /* USB Configs */ 77 #define CONFIG_USB_EHCI 78 #define CONFIG_USB_EHCI_MX6 79 #define CONFIG_USB_HOST_ETHER 80 #define CONFIG_USB_ETHER_ASIX 81 #define CONFIG_USB_ETHER_MCS7830 82 #define CONFIG_USB_ETHER_SMSC95XX 83 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 84 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 85 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 86 #define CONFIG_MXC_USB_FLAGS 0 87 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP 88 89 /* Miscellaneous commands */ 90 #define CONFIG_CMD_BMODE 91 92 /* Framebuffer and LCD */ 93 #define CONFIG_VIDEO_IPUV3 94 #define CONFIG_VIDEO_BMP_RLE8 95 #define CONFIG_SPLASH_SCREEN 96 #define CONFIG_SPLASH_SCREEN_ALIGN 97 #define CONFIG_VIDEO_BMP_GZIP 98 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024) 99 #define CONFIG_BMP_16BPP 100 #define CONFIG_IPUV3_CLK 260000000 101 #define CONFIG_CMD_HDMIDETECT 102 #define CONFIG_IMX_HDMI 103 #define CONFIG_IMX_VIDEO_SKIP 104 105 #define CONFIG_PREBOOT "" 106 107 #ifdef CONFIG_CMD_SATA 108 #define CONFIG_DRIVE_SATA "sata " 109 #else 110 #define CONFIG_DRIVE_SATA 111 #endif 112 113 #ifdef CONFIG_CMD_MMC 114 #define CONFIG_DRIVE_MMC "mmc " 115 #else 116 #define CONFIG_DRIVE_MMC 117 #endif 118 119 #ifdef CONFIG_USB_STORAGE 120 #define CONFIG_DRIVE_USB "usb " 121 #else 122 #define CONFIG_DRIVE_USB 123 #endif 124 125 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB 126 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC 127 128 #if defined(CONFIG_SABRELITE) 129 #define CONFIG_EXTRA_ENV_SETTINGS \ 130 "script=boot.scr\0" \ 131 "uimage=uImage\0" \ 132 "console=ttymxc1\0" \ 133 "fdt_high=0xffffffff\0" \ 134 "initrd_high=0xffffffff\0" \ 135 "fdt_file=imx6q-sabrelite.dtb\0" \ 136 "fdt_addr=0x18000000\0" \ 137 "boot_fdt=try\0" \ 138 "ip_dyn=yes\0" \ 139 "usb_pgood_delay=2000\0" \ 140 "mmcdevs=0 1\0" \ 141 "mmcpart=1\0" \ 142 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ 143 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 144 "root=${mmcroot}\0" \ 145 "loadbootscript=" \ 146 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 147 "bootscript=echo Running bootscript from mmc ...; " \ 148 "source\0" \ 149 "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ 150 "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 151 "mmcboot=echo Booting from mmc ...; " \ 152 "run mmcargs; " \ 153 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 154 "if run loadfdt; then " \ 155 "bootm ${loadaddr} - ${fdt_addr}; " \ 156 "else " \ 157 "if test ${boot_fdt} = try; then " \ 158 "bootm; " \ 159 "else " \ 160 "echo WARN: Cannot load the DT; " \ 161 "fi; " \ 162 "fi; " \ 163 "else " \ 164 "bootm; " \ 165 "fi;\0" \ 166 "netargs=setenv bootargs console=${console},${baudrate} " \ 167 "root=/dev/nfs " \ 168 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 169 "netboot=echo Booting from net ...; " \ 170 "run netargs; " \ 171 "if test ${ip_dyn} = yes; then " \ 172 "setenv get_cmd dhcp; " \ 173 "else " \ 174 "setenv get_cmd tftp; " \ 175 "fi; " \ 176 "${get_cmd} ${uimage}; " \ 177 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 178 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 179 "bootm ${loadaddr} - ${fdt_addr}; " \ 180 "else " \ 181 "if test ${boot_fdt} = try; then " \ 182 "bootm; " \ 183 "else " \ 184 "echo WARN: Cannot load the DT; " \ 185 "fi; " \ 186 "fi; " \ 187 "else " \ 188 "bootm; " \ 189 "fi;\0" 190 191 #define CONFIG_BOOTCOMMAND \ 192 "for mmcdev in ${mmcdevs}; do " \ 193 "mmc dev ${mmcdev}; " \ 194 "if mmc rescan; then " \ 195 "if run loadbootscript; then " \ 196 "run bootscript; " \ 197 "else " \ 198 "if run loaduimage; then " \ 199 "run mmcboot; " \ 200 "fi; " \ 201 "fi; " \ 202 "fi; " \ 203 "done; " \ 204 "run netboot; " 205 #else 206 #define CONFIG_EXTRA_ENV_SETTINGS \ 207 "bootdevs=" CONFIG_DRIVE_TYPES "\0" \ 208 "umsdevs=" CONFIG_UMSDEVS "\0" \ 209 "usb_pgood_delay=2000\0" \ 210 "console=ttymxc1\0" \ 211 "clearenv=if sf probe || sf probe || sf probe 1 ; then " \ 212 "sf erase 0xc0000 0x2000 && " \ 213 "echo restored environment to factory default ; fi\0" \ 214 "bootcmd=for dtype in ${bootdevs}" \ 215 "; do " \ 216 "if itest.s \"xusb\" == \"x${dtype}\" ; then " \ 217 "usb start ;" \ 218 "fi; " \ 219 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ 220 "load " \ 221 "${dtype} ${disk}:1 " \ 222 "10008000 " \ 223 "/6x_bootscript" \ 224 "&& source 10008000 ; " \ 225 "done ; " \ 226 "done; " \ 227 "setenv stdout serial,vga ; " \ 228 "echo ; echo 6x_bootscript not found ; " \ 229 "echo ; echo serial console at 115200, 8N1 ; echo ; " \ 230 "echo details at http://boundarydevices.com/6q_bootscript ; " \ 231 "setenv stdout serial;" \ 232 "setenv stdin serial,usbkbd;" \ 233 "for dtype in ${umsdevs} ; do " \ 234 "if itest.s sata == ${dtype}; then " \ 235 "initcmd='sata init' ;" \ 236 "else " \ 237 "initcmd='mmc rescan' ;" \ 238 "fi; " \ 239 "for disk in 0 1 ; do " \ 240 "if $initcmd && $dtype dev $disk ; then " \ 241 "setenv stdout serial,vga; " \ 242 "echo expose ${dtype} ${disk} " \ 243 "over USB; " \ 244 "ums 0 $dtype $disk ;" \ 245 "fi; " \ 246 " done; " \ 247 "done ;" \ 248 "setenv stdout serial,vga; " \ 249 "echo no block devices found;" \ 250 "\0" \ 251 "initrd_high=0xffffffff\0" \ 252 "upgradeu=for dtype in ${bootdevs}" \ 253 "; do " \ 254 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ 255 "load ${dtype} ${disk}:1 10008000 " \ 256 "/6x_upgrade " \ 257 "&& source 10008000 ; " \ 258 "done ; " \ 259 "done\0" \ 260 261 #endif 262 /* Miscellaneous configurable options */ 263 #define CONFIG_SYS_MEMTEST_START 0x10000000 264 #define CONFIG_SYS_MEMTEST_END 0x10010000 265 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 266 267 /* Physical Memory Map */ 268 #define CONFIG_NR_DRAM_BANKS 1 269 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 270 271 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 272 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 273 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 274 275 #define CONFIG_SYS_INIT_SP_OFFSET \ 276 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 277 #define CONFIG_SYS_INIT_SP_ADDR \ 278 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 279 280 /* Environment organization */ 281 #define CONFIG_ENV_SIZE (8 * 1024) 282 283 #if defined(CONFIG_SABRELITE) 284 #define CONFIG_ENV_IS_IN_MMC 285 #else 286 #define CONFIG_ENV_IS_IN_SPI_FLASH 287 #endif 288 289 #if defined(CONFIG_ENV_IS_IN_MMC) 290 #define CONFIG_ENV_OFFSET (6 * 64 * 1024) 291 #define CONFIG_SYS_MMC_ENV_DEV 0 292 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) 293 #define CONFIG_ENV_OFFSET (768 * 1024) 294 #define CONFIG_ENV_SECT_SIZE (8 * 1024) 295 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 296 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 297 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 298 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 299 #endif 300 301 #define CONFIG_CMD_BMP 302 303 #define CONFIG_SYS_ALT_MEMTEST 304 305 /* 306 * PCI express 307 */ 308 #ifdef CONFIG_CMD_PCI 309 #define CONFIG_PCI_SCAN_SHOW 310 #define CONFIG_PCIE_IMX 311 #endif 312 313 #define CONFIG_USB_FUNCTION_MASS_STORAGE 314 315 #define CONFIG_USB_FUNCTION_FASTBOOT 316 #define CONFIG_CMD_FASTBOOT 317 #define CONFIG_ANDROID_BOOT_IMAGE 318 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR 319 #define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 320 321 #endif /* __CONFIG_H */ 322