1 /* 2 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the Boundary Devices Nitrogen6X 5 * and Freescale i.MX6Q Sabre Lite boards. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #include "mx6_common.h" 14 15 #define CONFIG_MACH_TYPE 3769 16 17 /* Size of malloc() pool */ 18 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 19 20 #define CONFIG_BOARD_EARLY_INIT_F 21 #define CONFIG_MISC_INIT_R 22 #define CONFIG_CI_UDC 23 #define CONFIG_USBD_HS 24 #define CONFIG_USB_GADGET_DUALSPEED 25 #define CONFIG_USB_ETHER 26 #define CONFIG_USB_ETH_CDC 27 #define CONFIG_NETCONSOLE 28 29 #define CONFIG_CMD_FUSE 30 #ifdef CONFIG_CMD_FUSE 31 #define CONFIG_MXC_OCOTP 32 #endif 33 34 #define CONFIG_MXC_UART 35 #define CONFIG_MXC_UART_BASE UART2_BASE 36 37 #define CONFIG_CMD_SF 38 #ifdef CONFIG_CMD_SF 39 #define CONFIG_SPI_FLASH_SST 40 #define CONFIG_MXC_SPI 41 #define CONFIG_SF_DEFAULT_BUS 0 42 #define CONFIG_SF_DEFAULT_CS 0 43 #define CONFIG_SF_DEFAULT_SPEED 25000000 44 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) 45 #endif 46 47 /* I2C Configs */ 48 #define CONFIG_CMD_I2C 49 #define CONFIG_SYS_I2C 50 #define CONFIG_SYS_I2C_MXC 51 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 52 #define CONFIG_SYS_I2C_SPEED 100000 53 #define CONFIG_I2C_EDID 54 55 /* MMC Configs */ 56 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 57 #define CONFIG_SYS_FSL_USDHC_NUM 2 58 59 #ifdef CONFIG_MX6Q 60 #define CONFIG_CMD_SATA 61 #endif 62 63 /* 64 * SATA Configs 65 */ 66 #ifdef CONFIG_CMD_SATA 67 #define CONFIG_DWC_AHSATA 68 #define CONFIG_SYS_SATA_MAX_DEVICE 1 69 #define CONFIG_DWC_AHSATA_PORT_ID 0 70 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 71 #define CONFIG_LBA48 72 #define CONFIG_LIBATA 73 #endif 74 75 #define CONFIG_CMD_PING 76 #define CONFIG_CMD_DHCP 77 #define CONFIG_CMD_MII 78 #define CONFIG_FEC_MXC 79 #define CONFIG_MII 80 #define IMX_FEC_BASE ENET_BASE_ADDR 81 #define CONFIG_FEC_XCV_TYPE RGMII 82 #define CONFIG_ETHPRIME "FEC" 83 #define CONFIG_FEC_MXC_PHYADDR 6 84 #define CONFIG_PHYLIB 85 #define CONFIG_PHY_MICREL 86 #define CONFIG_PHY_MICREL_KSZ9021 87 88 /* USB Configs */ 89 #define CONFIG_CMD_USB 90 #define CONFIG_USB_EHCI 91 #define CONFIG_USB_EHCI_MX6 92 #define CONFIG_USB_STORAGE 93 #define CONFIG_USB_HOST_ETHER 94 #define CONFIG_USB_ETHER_ASIX 95 #define CONFIG_USB_ETHER_MCS7830 96 #define CONFIG_USB_ETHER_SMSC95XX 97 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 98 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 99 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 100 #define CONFIG_MXC_USB_FLAGS 0 101 #define CONFIG_USB_KEYBOARD 102 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP 103 104 /* Miscellaneous commands */ 105 #define CONFIG_CMD_BMODE 106 107 /* Framebuffer and LCD */ 108 #define CONFIG_VIDEO 109 #define CONFIG_VIDEO_IPUV3 110 #define CONFIG_CFB_CONSOLE 111 #define CONFIG_VGA_AS_SINGLE_DEVICE 112 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 113 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 114 #define CONFIG_VIDEO_BMP_RLE8 115 #define CONFIG_SPLASH_SCREEN 116 #define CONFIG_SPLASH_SCREEN_ALIGN 117 #define CONFIG_VIDEO_BMP_GZIP 118 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024) 119 #define CONFIG_BMP_16BPP 120 #define CONFIG_IPUV3_CLK 260000000 121 #define CONFIG_CMD_HDMIDETECT 122 #define CONFIG_CONSOLE_MUX 123 #define CONFIG_IMX_HDMI 124 #define CONFIG_IMX_VIDEO_SKIP 125 126 #define CONFIG_PREBOOT "" 127 128 #ifdef CONFIG_CMD_SATA 129 #define CONFIG_DRIVE_SATA "sata " 130 #else 131 #define CONFIG_DRIVE_SATA 132 #endif 133 134 #ifdef CONFIG_CMD_MMC 135 #define CONFIG_DRIVE_MMC "mmc " 136 #else 137 #define CONFIG_DRIVE_MMC 138 #endif 139 140 #ifdef CONFIG_USB_STORAGE 141 #define CONFIG_DRIVE_USB "usb " 142 #else 143 #define CONFIG_DRIVE_USB 144 #endif 145 146 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB 147 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC 148 149 #if defined(CONFIG_SABRELITE) 150 #define CONFIG_EXTRA_ENV_SETTINGS \ 151 "script=boot.scr\0" \ 152 "uimage=uImage\0" \ 153 "console=ttymxc1\0" \ 154 "fdt_high=0xffffffff\0" \ 155 "initrd_high=0xffffffff\0" \ 156 "fdt_file=imx6q-sabrelite.dtb\0" \ 157 "fdt_addr=0x18000000\0" \ 158 "boot_fdt=try\0" \ 159 "ip_dyn=yes\0" \ 160 "mmcdevs=0 1\0" \ 161 "mmcpart=1\0" \ 162 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ 163 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 164 "root=${mmcroot}\0" \ 165 "loadbootscript=" \ 166 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 167 "bootscript=echo Running bootscript from mmc ...; " \ 168 "source\0" \ 169 "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ 170 "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 171 "mmcboot=echo Booting from mmc ...; " \ 172 "run mmcargs; " \ 173 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 174 "if run loadfdt; then " \ 175 "bootm ${loadaddr} - ${fdt_addr}; " \ 176 "else " \ 177 "if test ${boot_fdt} = try; then " \ 178 "bootm; " \ 179 "else " \ 180 "echo WARN: Cannot load the DT; " \ 181 "fi; " \ 182 "fi; " \ 183 "else " \ 184 "bootm; " \ 185 "fi;\0" \ 186 "netargs=setenv bootargs console=${console},${baudrate} " \ 187 "root=/dev/nfs " \ 188 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 189 "netboot=echo Booting from net ...; " \ 190 "run netargs; " \ 191 "if test ${ip_dyn} = yes; then " \ 192 "setenv get_cmd dhcp; " \ 193 "else " \ 194 "setenv get_cmd tftp; " \ 195 "fi; " \ 196 "${get_cmd} ${uimage}; " \ 197 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 198 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 199 "bootm ${loadaddr} - ${fdt_addr}; " \ 200 "else " \ 201 "if test ${boot_fdt} = try; then " \ 202 "bootm; " \ 203 "else " \ 204 "echo WARN: Cannot load the DT; " \ 205 "fi; " \ 206 "fi; " \ 207 "else " \ 208 "bootm; " \ 209 "fi;\0" 210 211 #define CONFIG_BOOTCOMMAND \ 212 "for mmcdev in ${mmcdevs}; do " \ 213 "mmc dev ${mmcdev}; " \ 214 "if mmc rescan; then " \ 215 "if run loadbootscript; then " \ 216 "run bootscript; " \ 217 "else " \ 218 "if run loaduimage; then " \ 219 "run mmcboot; " \ 220 "fi; " \ 221 "fi; " \ 222 "fi; " \ 223 "done; " \ 224 "run netboot; " 225 #else 226 #define CONFIG_EXTRA_ENV_SETTINGS \ 227 "bootdevs=" CONFIG_DRIVE_TYPES "\0" \ 228 "umsdevs=" CONFIG_UMSDEVS "\0" \ 229 "console=ttymxc1\0" \ 230 "clearenv=if sf probe || sf probe || sf probe 1 ; then " \ 231 "sf erase 0xc0000 0x2000 && " \ 232 "echo restored environment to factory default ; fi\0" \ 233 "bootcmd=for dtype in ${bootdevs}" \ 234 "; do " \ 235 "if itest.s \"xusb\" == \"x${dtype}\" ; then " \ 236 "usb start ;" \ 237 "fi; " \ 238 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ 239 "load " \ 240 "${dtype} ${disk}:1 " \ 241 "10008000 " \ 242 "/6x_bootscript" \ 243 "&& source 10008000 ; " \ 244 "done ; " \ 245 "done; " \ 246 "setenv stdout serial,vga ; " \ 247 "echo ; echo 6x_bootscript not found ; " \ 248 "echo ; echo serial console at 115200, 8N1 ; echo ; " \ 249 "echo details at http://boundarydevices.com/6q_bootscript ; " \ 250 "setenv stdout serial;" \ 251 "setenv stdin serial,usbkbd;" \ 252 "for dtype in ${umsdevs} ; do " \ 253 "if itest.s sata == ${dtype}; then " \ 254 "initcmd='sata init' ;" \ 255 "else " \ 256 "initcmd='mmc rescan' ;" \ 257 "fi; " \ 258 "for disk in 0 1 ; do " \ 259 "if $initcmd && $dtype dev $disk ; then " \ 260 "setenv stdout serial,vga; " \ 261 "echo expose ${dtype} ${disk} " \ 262 "over USB; " \ 263 "ums 0 $dtype $disk ;" \ 264 "fi; " \ 265 " done; " \ 266 "done ;" \ 267 "setenv stdout serial,vga; " \ 268 "echo no block devices found;" \ 269 "\0" \ 270 "initrd_high=0xffffffff\0" \ 271 "upgradeu=for dtype in ${bootdevs}" \ 272 "; do " \ 273 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ 274 "load ${dtype} ${disk}:1 10008000 " \ 275 "/6x_upgrade " \ 276 "&& source 10008000 ; " \ 277 "done ; " \ 278 "done\0" \ 279 280 #endif 281 /* Miscellaneous configurable options */ 282 #define CONFIG_SYS_MEMTEST_START 0x10000000 283 #define CONFIG_SYS_MEMTEST_END 0x10010000 284 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 285 286 /* Physical Memory Map */ 287 #define CONFIG_NR_DRAM_BANKS 1 288 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 289 290 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 291 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 292 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 293 294 #define CONFIG_SYS_INIT_SP_OFFSET \ 295 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 296 #define CONFIG_SYS_INIT_SP_ADDR \ 297 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 298 299 /* Environment organization */ 300 #define CONFIG_ENV_SIZE (8 * 1024) 301 302 #if defined(CONFIG_SABRELITE) 303 #define CONFIG_ENV_IS_IN_MMC 304 #else 305 #define CONFIG_ENV_IS_IN_SPI_FLASH 306 #endif 307 308 #if defined(CONFIG_ENV_IS_IN_MMC) 309 #define CONFIG_ENV_OFFSET (6 * 64 * 1024) 310 #define CONFIG_SYS_MMC_ENV_DEV 0 311 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) 312 #define CONFIG_ENV_OFFSET (768 * 1024) 313 #define CONFIG_ENV_SECT_SIZE (8 * 1024) 314 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 315 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 316 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 317 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 318 #endif 319 320 #define CONFIG_CMD_BMP 321 322 #define CONFIG_CMD_TIME 323 #define CONFIG_CMD_MEMTEST 324 #define CONFIG_SYS_ALT_MEMTEST 325 326 /* 327 * PCI express 328 */ 329 #ifdef CONFIG_CMD_PCI 330 #define CONFIG_PCI 331 #define CONFIG_PCI_PNP 332 #define CONFIG_PCI_SCAN_SHOW 333 #define CONFIG_PCIE_IMX 334 #endif 335 336 #define CONFIG_CMD_ELF 337 338 #define CONFIG_USB_GADGET 339 #define CONFIG_CMD_USB_MASS_STORAGE 340 #define CONFIG_USB_GADGET_MASS_STORAGE 341 #define CONFIG_USBDOWNLOAD_GADGET 342 #define CONFIG_USB_GADGET_VBUS_DRAW 2 343 344 /* Netchip IDs */ 345 #define CONFIG_G_DNL_VENDOR_NUM 0x0525 346 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 347 #define CONFIG_G_DNL_MANUFACTURER "Boundary" 348 349 #define CONFIG_CMD_FASTBOOT 350 #define CONFIG_ANDROID_BOOT_IMAGE 351 #define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR 352 #define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 353 354 #endif /* __CONFIG_H */ 355