xref: /openbmc/u-boot/include/configs/nas220.h (revision a373024e)
1 /*
2  * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
3  *
4  * based on work from:
5  * (C) Copyright 2009
6  * Marvell Semiconductor <www.marvell.com>
7  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #ifndef _CONFIG_NAS220_H
13 #define _CONFIG_NAS220_H
14 
15 /*
16  * Machine type ID
17  */
18 #define CONFIG_MACH_TYPE		MACH_TYPE_RD88F6192_NAS
19 
20 /*
21  * High Level Configuration Options (easy to change)
22  */
23 #define CONFIG_FEROCEON_88FR131		/* #define CPU Core subversion */
24 #define CONFIG_KW88F6192		/* SOC Name */
25 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
26 
27 /* power-on led, regulator, sata0, sata1 */
28 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
29 #define NAS220_GE_OE_VAL_HIGH (0)
30 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
31 #define NAS220_GE_OE_HIGH (~(0))
32 
33 /* PHY related */
34 #define MV88E1116_LED_FCTRL_REG		10
35 #define MV88E1116_CPRSP_CR3_REG		21
36 #define MV88E1116_MAC_CTRL_REG		21
37 #define MV88E1116_PGADR_REG		22
38 #define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
39 #define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)
40 
41 /*
42  * Commands configuration
43  */
44 #define CONFIG_SYS_LONGHELP
45 #define CONFIG_AUTO_COMPLETE
46 #define CONFIG_CMDLINE_EDITING
47 
48 /*
49  * mv-common.h should be defined after CMD configs since it used them
50  * to enable certain macros
51  */
52 #include "mv-common.h"
53 
54 /*
55  *  Environment variables configurations
56  */
57 #ifdef CONFIG_CMD_NAND
58 #define CONFIG_ENV_SECT_SIZE 0x10000
59 #endif
60 
61 #define CONFIG_ENV_SIZE	0x10000
62 #define CONFIG_ENV_OFFSET 0xa0000
63 
64 /*
65  * Default environment variables
66  */
67 #define CONFIG_BOOTCOMMAND ""
68 
69 #define CONFIG_EXTRA_ENV_SETTINGS \
70 	"bootargs=console=ttyS0,115200\0" \
71 	"mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
72 	"0x010000@0xa0000(env),"\
73 	"0x500000@0xc0000(uimage),"\
74 	"0x1a40000@0x5c0000(rootfs)\0" \
75 	"mtdids=nand0=orion_nand\0"\
76 	"bootdelay=-1\0"\
77 	"autostart=no\0"\
78 	"autoload=no\0"
79 
80 /*
81  * Ethernet Driver configuration
82  */
83 #ifdef CONFIG_CMD_NET
84 #define CONFIG_MVGBE_PORTS {1, 0}	/* enable port 0 only */
85 #define CONFIG_PHY_BASE_ADR 8
86 #endif /* CONFIG_CMD_NET */
87 
88 /*
89  * USB/EHCI
90  */
91 #ifdef CONFIG_CMD_USB
92 #define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
93 #define CONFIG_EHCI_IS_TDI
94 #define CONFIG_SUPPORT_VFAT
95 #endif /* CONFIG_CMD_USB */
96 
97 /*
98  * File system
99  */
100 #define CONFIG_JFFS2_NAND
101 #define CONFIG_JFFS2_LZO
102 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
103 #define CONFIG_MTD_PARTITIONS
104 
105 /*
106  * SATA
107  */
108 #ifdef CONFIG_MVSATA_IDE
109 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
110 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
111 #endif
112 
113 /*
114  * EFI partition
115  */
116 
117 /*
118  *  Date Time
119  */
120 #ifdef CONFIG_CMD_DATE
121 #define CONFIG_RTC_MV
122 #endif /* CONFIG_CMD_DATE */
123 
124 #define CONFIG_KIRKWOOD_GPIO
125 
126 #endif /* _CONFIG_NAS220_H */
127 
128