1 /* 2 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> 3 * 4 * based on work from: 5 * (C) Copyright 2009 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_NAS220_H 13 #define _CONFIG_NAS220_H 14 15 /* 16 * Machine type definition and ID 17 */ 18 #define MACH_TYPE_NAS220 MACH_TYPE_RD88F6192_NAS 19 #define CONFIG_MACH_TYPE MACH_TYPE_NAS220 20 #define CONFIG_IDENT_STRING "\nNAS 220" 21 22 /* 23 * High Level Configuration Options (easy to change) 24 */ 25 #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ 26 #define CONFIG_KW88F6192 /* SOC Name */ 27 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 28 29 /* power-on led, regulator, sata0, sata1 */ 30 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) 31 #define NAS220_GE_OE_VAL_HIGH (0) 32 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) 33 #define NAS220_GE_OE_HIGH (~(0)) 34 35 /* PHY related */ 36 #define MV88E1116_LED_FCTRL_REG 10 37 #define MV88E1116_CPRSP_CR3_REG 21 38 #define MV88E1116_MAC_CTRL_REG 21 39 #define MV88E1116_PGADR_REG 22 40 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 41 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 42 43 /* 44 * Commands configuration 45 */ 46 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 47 #define CONFIG_CMD_DHCP 48 #define CONFIG_CMD_MII 49 #define CONFIG_CMD_NAND 50 #define CONFIG_CMD_PING 51 #define CONFIG_CMD_USB 52 #define CONFIG_CMD_DATE 53 #define CONFIG_CMD_IDE 54 #define CONFIG_SYS_LONGHELP 55 #define CONFIG_AUTO_COMPLETE 56 #define CONFIG_CMDLINE_EDITING 57 #define CONFIG_SYS_HUSH_PARSER 58 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 59 60 /* 61 * mv-common.h should be defined after CMD configs since it used them 62 * to enable certain macros 63 */ 64 #include "mv-common.h" 65 66 /* 67 * Environment variables configurations 68 */ 69 #ifdef CONFIG_CMD_NAND 70 #define CONFIG_ENV_IS_IN_NAND 71 #define CONFIG_ENV_SECT_SIZE 0x10000 72 #else 73 #define CONFIG_ENV_IS_NOWHERE 74 #endif 75 76 #define CONFIG_ENV_SIZE 0x10000 77 #define CONFIG_ENV_OFFSET 0xa0000 78 79 /* 80 * Default environment variables 81 */ 82 #define CONFIG_BOOTCOMMAND "" 83 84 #define CONFIG_EXTRA_ENV_SETTINGS \ 85 "bootargs=console=ttyS0,115200\0" \ 86 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ 87 "0x010000@0xa0000(env),"\ 88 "0x500000@0xc0000(uimage),"\ 89 "0x1a40000@0x5c0000(rootfs)\0" \ 90 "mtdids=nand0=orion_nand\0"\ 91 "bootdelay=-1\0"\ 92 "autostart=no\0"\ 93 "autoload=no\0" 94 95 /* 96 * Ethernet Driver configuration 97 */ 98 #ifdef CONFIG_CMD_NET 99 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 100 #define CONFIG_PHY_BASE_ADR 8 101 #endif /* CONFIG_CMD_NET */ 102 103 /* 104 * USB/EHCI 105 */ 106 #ifdef CONFIG_CMD_USB 107 #define CONFIG_USB_EHCI /* Enable EHCI USB support */ 108 #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ 109 #define CONFIG_EHCI_IS_TDI 110 #define CONFIG_USB_STORAGE 111 #define CONFIG_DOS_PARTITION 112 #define CONFIG_SUPPORT_VFAT 113 #endif /* CONFIG_CMD_USB */ 114 115 /* 116 * File system 117 */ 118 #define CONFIG_CMD_EXT2 119 #define CONFIG_CMD_EXT4 120 #define CONFIG_CMD_FAT 121 #define CONFIG_CMD_JFFS2 122 #define CONFIG_JFFS2_NAND 123 #define CONFIG_JFFS2_LZO 124 #define CONFIG_CMD_UBI 125 #define CONFIG_CMD_UBIFS 126 #define CONFIG_RBTREE 127 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 128 #define CONFIG_MTD_PARTITIONS 129 #define CONFIG_CMD_MTDPARTS 130 #define CONFIG_LZO 131 132 /* 133 * SATA 134 */ 135 #ifdef CONFIG_MVSATA_IDE 136 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 137 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 138 #endif 139 140 /* 141 * EFI partition 142 */ 143 #define CONFIG_EFI_PARTITION 144 145 /* 146 * Date Time 147 */ 148 #ifdef CONFIG_CMD_DATE 149 #define CONFIG_RTC_MV 150 #endif /* CONFIG_CMD_DATE */ 151 152 #define CONFIG_KIRKWOOD_GPIO 153 154 #endif /* _CONFIG_NAS220_H */ 155 156