1 /* 2 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> 3 * 4 * based on work from: 5 * (C) Copyright 2009 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_NAS220_H 13 #define _CONFIG_NAS220_H 14 15 /* 16 * Machine type ID 17 */ 18 #define CONFIG_MACH_TYPE MACH_TYPE_RD88F6192_NAS 19 20 /* 21 * High Level Configuration Options (easy to change) 22 */ 23 #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ 24 #define CONFIG_KW88F6192 /* SOC Name */ 25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 26 27 /* power-on led, regulator, sata0, sata1 */ 28 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) 29 #define NAS220_GE_OE_VAL_HIGH (0) 30 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) 31 #define NAS220_GE_OE_HIGH (~(0)) 32 33 /* PHY related */ 34 #define MV88E1116_LED_FCTRL_REG 10 35 #define MV88E1116_CPRSP_CR3_REG 21 36 #define MV88E1116_MAC_CTRL_REG 21 37 #define MV88E1116_PGADR_REG 22 38 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 39 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 40 41 /* 42 * Commands configuration 43 */ 44 45 /* 46 * mv-common.h should be defined after CMD configs since it used them 47 * to enable certain macros 48 */ 49 #include "mv-common.h" 50 51 /* 52 * Environment variables configurations 53 */ 54 #ifdef CONFIG_CMD_NAND 55 #define CONFIG_ENV_SECT_SIZE 0x10000 56 #endif 57 58 #define CONFIG_ENV_SIZE 0x10000 59 #define CONFIG_ENV_OFFSET 0xa0000 60 61 /* 62 * Default environment variables 63 */ 64 #define CONFIG_BOOTCOMMAND "" 65 66 #define CONFIG_EXTRA_ENV_SETTINGS \ 67 "bootargs=console=ttyS0,115200\0" \ 68 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ 69 "0x010000@0xa0000(env),"\ 70 "0x500000@0xc0000(uimage),"\ 71 "0x1a40000@0x5c0000(rootfs)\0" \ 72 "mtdids=nand0=orion_nand\0"\ 73 "bootdelay=-1\0"\ 74 "autostart=no\0"\ 75 "autoload=no\0" 76 77 /* 78 * Ethernet Driver configuration 79 */ 80 #ifdef CONFIG_CMD_NET 81 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 82 #define CONFIG_PHY_BASE_ADR 8 83 #endif /* CONFIG_CMD_NET */ 84 85 /* 86 * USB/EHCI 87 */ 88 #ifdef CONFIG_CMD_USB 89 #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ 90 #define CONFIG_EHCI_IS_TDI 91 #endif /* CONFIG_CMD_USB */ 92 93 /* 94 * File system 95 */ 96 #define CONFIG_JFFS2_NAND 97 #define CONFIG_JFFS2_LZO 98 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 99 #define CONFIG_MTD_PARTITIONS 100 101 /* 102 * SATA 103 */ 104 #ifdef CONFIG_MVSATA_IDE 105 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 106 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 107 #endif 108 109 /* 110 * EFI partition 111 */ 112 113 /* 114 * Date Time 115 */ 116 #ifdef CONFIG_CMD_DATE 117 #define CONFIG_RTC_MV 118 #endif /* CONFIG_CMD_DATE */ 119 120 #define CONFIG_KIRKWOOD_GPIO 121 122 #endif /* _CONFIG_NAS220_H */ 123 124