1 /* 2 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> 3 * 4 * based on work from: 5 * (C) Copyright 2009 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_NAS220_H 13 #define _CONFIG_NAS220_H 14 15 /* 16 * Machine type definition and ID 17 */ 18 #define MACH_TYPE_NAS220 MACH_TYPE_RD88F6192_NAS 19 #define CONFIG_MACH_TYPE MACH_TYPE_NAS220 20 21 /* 22 * High Level Configuration Options (easy to change) 23 */ 24 #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ 25 #define CONFIG_KW88F6192 /* SOC Name */ 26 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 27 28 /* power-on led, regulator, sata0, sata1 */ 29 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) 30 #define NAS220_GE_OE_VAL_HIGH (0) 31 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) 32 #define NAS220_GE_OE_HIGH (~(0)) 33 34 /* PHY related */ 35 #define MV88E1116_LED_FCTRL_REG 10 36 #define MV88E1116_CPRSP_CR3_REG 21 37 #define MV88E1116_MAC_CTRL_REG 21 38 #define MV88E1116_PGADR_REG 22 39 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 40 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 41 42 /* 43 * Commands configuration 44 */ 45 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 46 #define CONFIG_CMD_NAND 47 #define CONFIG_CMD_DATE 48 #define CONFIG_CMD_IDE 49 #define CONFIG_SYS_LONGHELP 50 #define CONFIG_AUTO_COMPLETE 51 #define CONFIG_CMDLINE_EDITING 52 53 /* 54 * mv-common.h should be defined after CMD configs since it used them 55 * to enable certain macros 56 */ 57 #include "mv-common.h" 58 59 /* 60 * Environment variables configurations 61 */ 62 #ifdef CONFIG_CMD_NAND 63 #define CONFIG_ENV_IS_IN_NAND 64 #define CONFIG_ENV_SECT_SIZE 0x10000 65 #else 66 #define CONFIG_ENV_IS_NOWHERE 67 #endif 68 69 #define CONFIG_ENV_SIZE 0x10000 70 #define CONFIG_ENV_OFFSET 0xa0000 71 72 /* 73 * Default environment variables 74 */ 75 #define CONFIG_BOOTCOMMAND "" 76 77 #define CONFIG_EXTRA_ENV_SETTINGS \ 78 "bootargs=console=ttyS0,115200\0" \ 79 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ 80 "0x010000@0xa0000(env),"\ 81 "0x500000@0xc0000(uimage),"\ 82 "0x1a40000@0x5c0000(rootfs)\0" \ 83 "mtdids=nand0=orion_nand\0"\ 84 "bootdelay=-1\0"\ 85 "autostart=no\0"\ 86 "autoload=no\0" 87 88 /* 89 * Ethernet Driver configuration 90 */ 91 #ifdef CONFIG_CMD_NET 92 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 93 #define CONFIG_PHY_BASE_ADR 8 94 #endif /* CONFIG_CMD_NET */ 95 96 /* 97 * USB/EHCI 98 */ 99 #ifdef CONFIG_CMD_USB 100 #define CONFIG_USB_EHCI /* Enable EHCI USB support */ 101 #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ 102 #define CONFIG_EHCI_IS_TDI 103 #define CONFIG_DOS_PARTITION 104 #define CONFIG_SUPPORT_VFAT 105 #endif /* CONFIG_CMD_USB */ 106 107 /* 108 * File system 109 */ 110 #define CONFIG_CMD_JFFS2 111 #define CONFIG_JFFS2_NAND 112 #define CONFIG_JFFS2_LZO 113 #define CONFIG_CMD_UBIFS 114 #define CONFIG_RBTREE 115 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 116 #define CONFIG_MTD_PARTITIONS 117 #define CONFIG_CMD_MTDPARTS 118 #define CONFIG_LZO 119 120 /* 121 * SATA 122 */ 123 #ifdef CONFIG_MVSATA_IDE 124 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 125 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 126 #endif 127 128 /* 129 * EFI partition 130 */ 131 #define CONFIG_EFI_PARTITION 132 133 /* 134 * Date Time 135 */ 136 #ifdef CONFIG_CMD_DATE 137 #define CONFIG_RTC_MV 138 #endif /* CONFIG_CMD_DATE */ 139 140 #define CONFIG_KIRKWOOD_GPIO 141 142 #endif /* _CONFIG_NAS220_H */ 143 144