1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> 4 * 5 * based on work from: 6 * (C) Copyright 2009 7 * Marvell Semiconductor <www.marvell.com> 8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 9 */ 10 11 #ifndef _CONFIG_NAS220_H 12 #define _CONFIG_NAS220_H 13 14 /* 15 * Machine type ID 16 */ 17 #define CONFIG_MACH_TYPE MACH_TYPE_RD88F6192_NAS 18 19 /* 20 * High Level Configuration Options (easy to change) 21 */ 22 #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ 23 #define CONFIG_KW88F6192 /* SOC Name */ 24 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 25 26 /* power-on led, regulator, sata0, sata1 */ 27 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) 28 #define NAS220_GE_OE_VAL_HIGH (0) 29 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) 30 #define NAS220_GE_OE_HIGH (~(0)) 31 32 /* PHY related */ 33 #define MV88E1116_LED_FCTRL_REG 10 34 #define MV88E1116_CPRSP_CR3_REG 21 35 #define MV88E1116_MAC_CTRL_REG 21 36 #define MV88E1116_PGADR_REG 22 37 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 38 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 39 40 /* 41 * Commands configuration 42 */ 43 44 /* 45 * mv-common.h should be defined after CMD configs since it used them 46 * to enable certain macros 47 */ 48 #include "mv-common.h" 49 50 /* 51 * Environment variables configurations 52 */ 53 #ifdef CONFIG_CMD_NAND 54 #define CONFIG_ENV_SECT_SIZE 0x10000 55 #endif 56 57 #define CONFIG_ENV_SIZE 0x10000 58 #define CONFIG_ENV_OFFSET 0xa0000 59 60 /* 61 * Default environment variables 62 */ 63 #define CONFIG_BOOTCOMMAND "" 64 65 #define CONFIG_EXTRA_ENV_SETTINGS \ 66 "bootargs=console=ttyS0,115200\0" \ 67 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ 68 "0x010000@0xa0000(env),"\ 69 "0x500000@0xc0000(uimage),"\ 70 "0x1a40000@0x5c0000(rootfs)\0" \ 71 "mtdids=nand0=orion_nand\0"\ 72 "autostart=no\0"\ 73 "autoload=no\0" 74 75 /* 76 * Ethernet Driver configuration 77 */ 78 #ifdef CONFIG_CMD_NET 79 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 80 #define CONFIG_PHY_BASE_ADR 8 81 #endif /* CONFIG_CMD_NET */ 82 83 /* 84 * USB/EHCI 85 */ 86 #ifdef CONFIG_CMD_USB 87 #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ 88 #define CONFIG_EHCI_IS_TDI 89 #endif /* CONFIG_CMD_USB */ 90 91 /* 92 * File system 93 */ 94 #define CONFIG_JFFS2_NAND 95 #define CONFIG_JFFS2_LZO 96 97 /* 98 * SATA 99 */ 100 #ifdef CONFIG_MVSATA_IDE 101 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 102 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 103 #endif 104 105 /* 106 * EFI partition 107 */ 108 109 #define CONFIG_KIRKWOOD_GPIO 110 111 #endif /* _CONFIG_NAS220_H */ 112 113