1 /* 2 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> 3 * 4 * based on work from: 5 * (C) Copyright 2009 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_NAS220_H 13 #define _CONFIG_NAS220_H 14 15 /* 16 * Machine type ID 17 */ 18 #define CONFIG_MACH_TYPE MACH_TYPE_RD88F6192_NAS 19 20 /* 21 * High Level Configuration Options (easy to change) 22 */ 23 #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ 24 #define CONFIG_KW88F6192 /* SOC Name */ 25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 26 27 /* power-on led, regulator, sata0, sata1 */ 28 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) 29 #define NAS220_GE_OE_VAL_HIGH (0) 30 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) 31 #define NAS220_GE_OE_HIGH (~(0)) 32 33 /* PHY related */ 34 #define MV88E1116_LED_FCTRL_REG 10 35 #define MV88E1116_CPRSP_CR3_REG 21 36 #define MV88E1116_MAC_CTRL_REG 21 37 #define MV88E1116_PGADR_REG 22 38 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 39 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 40 41 /* 42 * Commands configuration 43 */ 44 #define CONFIG_SYS_LONGHELP 45 #define CONFIG_AUTO_COMPLETE 46 #define CONFIG_CMDLINE_EDITING 47 48 /* 49 * mv-common.h should be defined after CMD configs since it used them 50 * to enable certain macros 51 */ 52 #include "mv-common.h" 53 54 /* 55 * Environment variables configurations 56 */ 57 #ifdef CONFIG_CMD_NAND 58 #define CONFIG_ENV_SECT_SIZE 0x10000 59 #endif 60 61 #define CONFIG_ENV_SIZE 0x10000 62 #define CONFIG_ENV_OFFSET 0xa0000 63 64 /* 65 * Default environment variables 66 */ 67 #define CONFIG_BOOTCOMMAND "" 68 69 #define CONFIG_EXTRA_ENV_SETTINGS \ 70 "bootargs=console=ttyS0,115200\0" \ 71 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ 72 "0x010000@0xa0000(env),"\ 73 "0x500000@0xc0000(uimage),"\ 74 "0x1a40000@0x5c0000(rootfs)\0" \ 75 "mtdids=nand0=orion_nand\0"\ 76 "bootdelay=-1\0"\ 77 "autostart=no\0"\ 78 "autoload=no\0" 79 80 /* 81 * Ethernet Driver configuration 82 */ 83 #ifdef CONFIG_CMD_NET 84 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 85 #define CONFIG_PHY_BASE_ADR 8 86 #endif /* CONFIG_CMD_NET */ 87 88 /* 89 * USB/EHCI 90 */ 91 #ifdef CONFIG_CMD_USB 92 #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ 93 #define CONFIG_EHCI_IS_TDI 94 #endif /* CONFIG_CMD_USB */ 95 96 /* 97 * File system 98 */ 99 #define CONFIG_JFFS2_NAND 100 #define CONFIG_JFFS2_LZO 101 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 102 #define CONFIG_MTD_PARTITIONS 103 104 /* 105 * SATA 106 */ 107 #ifdef CONFIG_MVSATA_IDE 108 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 109 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 110 #endif 111 112 /* 113 * EFI partition 114 */ 115 116 /* 117 * Date Time 118 */ 119 #ifdef CONFIG_CMD_DATE 120 #define CONFIG_RTC_MV 121 #endif /* CONFIG_CMD_DATE */ 122 123 #define CONFIG_KIRKWOOD_GPIO 124 125 #endif /* _CONFIG_NAS220_H */ 126 127