1 /* 2 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> 3 * 4 * based on work from: 5 * (C) Copyright 2009 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_NAS220_H 13 #define _CONFIG_NAS220_H 14 15 /* 16 * Machine type ID 17 */ 18 #define CONFIG_MACH_TYPE MACH_TYPE_RD88F6192_NAS 19 20 /* 21 * High Level Configuration Options (easy to change) 22 */ 23 #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ 24 #define CONFIG_KW88F6192 /* SOC Name */ 25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 26 27 /* power-on led, regulator, sata0, sata1 */ 28 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) 29 #define NAS220_GE_OE_VAL_HIGH (0) 30 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) 31 #define NAS220_GE_OE_HIGH (~(0)) 32 33 /* PHY related */ 34 #define MV88E1116_LED_FCTRL_REG 10 35 #define MV88E1116_CPRSP_CR3_REG 21 36 #define MV88E1116_MAC_CTRL_REG 21 37 #define MV88E1116_PGADR_REG 22 38 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 39 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 40 41 /* 42 * Commands configuration 43 */ 44 #define CONFIG_CMD_NAND 45 #define CONFIG_CMD_DATE 46 #define CONFIG_CMD_IDE 47 #define CONFIG_SYS_LONGHELP 48 #define CONFIG_AUTO_COMPLETE 49 #define CONFIG_CMDLINE_EDITING 50 51 /* 52 * mv-common.h should be defined after CMD configs since it used them 53 * to enable certain macros 54 */ 55 #include "mv-common.h" 56 57 /* 58 * Environment variables configurations 59 */ 60 #ifdef CONFIG_CMD_NAND 61 #define CONFIG_ENV_IS_IN_NAND 62 #define CONFIG_ENV_SECT_SIZE 0x10000 63 #else 64 #define CONFIG_ENV_IS_NOWHERE 65 #endif 66 67 #define CONFIG_ENV_SIZE 0x10000 68 #define CONFIG_ENV_OFFSET 0xa0000 69 70 /* 71 * Default environment variables 72 */ 73 #define CONFIG_BOOTCOMMAND "" 74 75 #define CONFIG_EXTRA_ENV_SETTINGS \ 76 "bootargs=console=ttyS0,115200\0" \ 77 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ 78 "0x010000@0xa0000(env),"\ 79 "0x500000@0xc0000(uimage),"\ 80 "0x1a40000@0x5c0000(rootfs)\0" \ 81 "mtdids=nand0=orion_nand\0"\ 82 "bootdelay=-1\0"\ 83 "autostart=no\0"\ 84 "autoload=no\0" 85 86 /* 87 * Ethernet Driver configuration 88 */ 89 #ifdef CONFIG_CMD_NET 90 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 91 #define CONFIG_PHY_BASE_ADR 8 92 #endif /* CONFIG_CMD_NET */ 93 94 /* 95 * USB/EHCI 96 */ 97 #ifdef CONFIG_CMD_USB 98 #define CONFIG_USB_EHCI /* Enable EHCI USB support */ 99 #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ 100 #define CONFIG_EHCI_IS_TDI 101 #define CONFIG_SUPPORT_VFAT 102 #endif /* CONFIG_CMD_USB */ 103 104 /* 105 * File system 106 */ 107 #define CONFIG_CMD_JFFS2 108 #define CONFIG_JFFS2_NAND 109 #define CONFIG_JFFS2_LZO 110 #define CONFIG_CMD_UBIFS 111 #define CONFIG_RBTREE 112 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 113 #define CONFIG_MTD_PARTITIONS 114 #define CONFIG_CMD_MTDPARTS 115 #define CONFIG_LZO 116 117 /* 118 * SATA 119 */ 120 #ifdef CONFIG_MVSATA_IDE 121 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 122 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 123 #endif 124 125 /* 126 * EFI partition 127 */ 128 129 /* 130 * Date Time 131 */ 132 #ifdef CONFIG_CMD_DATE 133 #define CONFIG_RTC_MV 134 #endif /* CONFIG_CMD_DATE */ 135 136 #define CONFIG_KIRKWOOD_GPIO 137 138 #endif /* _CONFIG_NAS220_H */ 139 140