1 /* 2 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> 3 * 4 * based on work from: 5 * (C) Copyright 2009 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_NAS220_H 13 #define _CONFIG_NAS220_H 14 15 /* 16 * Machine type ID 17 */ 18 #define CONFIG_MACH_TYPE MACH_TYPE_RD88F6192_NAS 19 20 /* 21 * High Level Configuration Options (easy to change) 22 */ 23 #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ 24 #define CONFIG_KW88F6192 /* SOC Name */ 25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 26 27 /* power-on led, regulator, sata0, sata1 */ 28 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) 29 #define NAS220_GE_OE_VAL_HIGH (0) 30 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) 31 #define NAS220_GE_OE_HIGH (~(0)) 32 33 /* PHY related */ 34 #define MV88E1116_LED_FCTRL_REG 10 35 #define MV88E1116_CPRSP_CR3_REG 21 36 #define MV88E1116_MAC_CTRL_REG 21 37 #define MV88E1116_PGADR_REG 22 38 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 39 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 40 41 /* 42 * Commands configuration 43 */ 44 #define CONFIG_CMD_NAND 45 #define CONFIG_CMD_IDE 46 #define CONFIG_SYS_LONGHELP 47 #define CONFIG_AUTO_COMPLETE 48 #define CONFIG_CMDLINE_EDITING 49 50 /* 51 * mv-common.h should be defined after CMD configs since it used them 52 * to enable certain macros 53 */ 54 #include "mv-common.h" 55 56 /* 57 * Environment variables configurations 58 */ 59 #ifdef CONFIG_CMD_NAND 60 #define CONFIG_ENV_IS_IN_NAND 61 #define CONFIG_ENV_SECT_SIZE 0x10000 62 #else 63 #define CONFIG_ENV_IS_NOWHERE 64 #endif 65 66 #define CONFIG_ENV_SIZE 0x10000 67 #define CONFIG_ENV_OFFSET 0xa0000 68 69 /* 70 * Default environment variables 71 */ 72 #define CONFIG_BOOTCOMMAND "" 73 74 #define CONFIG_EXTRA_ENV_SETTINGS \ 75 "bootargs=console=ttyS0,115200\0" \ 76 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ 77 "0x010000@0xa0000(env),"\ 78 "0x500000@0xc0000(uimage),"\ 79 "0x1a40000@0x5c0000(rootfs)\0" \ 80 "mtdids=nand0=orion_nand\0"\ 81 "bootdelay=-1\0"\ 82 "autostart=no\0"\ 83 "autoload=no\0" 84 85 /* 86 * Ethernet Driver configuration 87 */ 88 #ifdef CONFIG_CMD_NET 89 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 90 #define CONFIG_PHY_BASE_ADR 8 91 #endif /* CONFIG_CMD_NET */ 92 93 /* 94 * USB/EHCI 95 */ 96 #ifdef CONFIG_CMD_USB 97 #define CONFIG_USB_EHCI /* Enable EHCI USB support */ 98 #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ 99 #define CONFIG_EHCI_IS_TDI 100 #define CONFIG_SUPPORT_VFAT 101 #endif /* CONFIG_CMD_USB */ 102 103 /* 104 * File system 105 */ 106 #define CONFIG_CMD_JFFS2 107 #define CONFIG_JFFS2_NAND 108 #define CONFIG_JFFS2_LZO 109 #define CONFIG_CMD_UBIFS 110 #define CONFIG_RBTREE 111 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 112 #define CONFIG_MTD_PARTITIONS 113 #define CONFIG_CMD_MTDPARTS 114 #define CONFIG_LZO 115 116 /* 117 * SATA 118 */ 119 #ifdef CONFIG_MVSATA_IDE 120 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 121 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 122 #endif 123 124 /* 125 * EFI partition 126 */ 127 128 /* 129 * Date Time 130 */ 131 #ifdef CONFIG_CMD_DATE 132 #define CONFIG_RTC_MV 133 #endif /* CONFIG_CMD_DATE */ 134 135 #define CONFIG_KIRKWOOD_GPIO 136 137 #endif /* _CONFIG_NAS220_H */ 138 139