1 /* 2 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> 3 * 4 * based on work from: 5 * (C) Copyright 2009 6 * Marvell Semiconductor <www.marvell.com> 7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_NAS220_H 13 #define _CONFIG_NAS220_H 14 15 /* 16 * Machine type definition and ID 17 */ 18 #define MACH_TYPE_NAS220 MACH_TYPE_RD88F6192_NAS 19 #define CONFIG_MACH_TYPE MACH_TYPE_NAS220 20 #define CONFIG_IDENT_STRING "\nNAS 220" 21 22 /* 23 * High Level Configuration Options (easy to change) 24 */ 25 #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ 26 #define CONFIG_KW88F6192 /* SOC Name */ 27 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 28 29 /* power-on led, regulator, sata0, sata1 */ 30 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) 31 #define NAS220_GE_OE_VAL_HIGH (0) 32 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) 33 #define NAS220_GE_OE_HIGH (~(0)) 34 35 /* PHY related */ 36 #define MV88E1116_LED_FCTRL_REG 10 37 #define MV88E1116_CPRSP_CR3_REG 21 38 #define MV88E1116_MAC_CTRL_REG 21 39 #define MV88E1116_PGADR_REG 22 40 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 41 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 42 43 /* 44 * Commands configuration 45 */ 46 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 47 #define CONFIG_CMD_NAND 48 #define CONFIG_CMD_DATE 49 #define CONFIG_CMD_IDE 50 #define CONFIG_SYS_LONGHELP 51 #define CONFIG_AUTO_COMPLETE 52 #define CONFIG_CMDLINE_EDITING 53 54 /* 55 * mv-common.h should be defined after CMD configs since it used them 56 * to enable certain macros 57 */ 58 #include "mv-common.h" 59 60 /* 61 * Environment variables configurations 62 */ 63 #ifdef CONFIG_CMD_NAND 64 #define CONFIG_ENV_IS_IN_NAND 65 #define CONFIG_ENV_SECT_SIZE 0x10000 66 #else 67 #define CONFIG_ENV_IS_NOWHERE 68 #endif 69 70 #define CONFIG_ENV_SIZE 0x10000 71 #define CONFIG_ENV_OFFSET 0xa0000 72 73 /* 74 * Default environment variables 75 */ 76 #define CONFIG_BOOTCOMMAND "" 77 78 #define CONFIG_EXTRA_ENV_SETTINGS \ 79 "bootargs=console=ttyS0,115200\0" \ 80 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ 81 "0x010000@0xa0000(env),"\ 82 "0x500000@0xc0000(uimage),"\ 83 "0x1a40000@0x5c0000(rootfs)\0" \ 84 "mtdids=nand0=orion_nand\0"\ 85 "bootdelay=-1\0"\ 86 "autostart=no\0"\ 87 "autoload=no\0" 88 89 /* 90 * Ethernet Driver configuration 91 */ 92 #ifdef CONFIG_CMD_NET 93 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 94 #define CONFIG_PHY_BASE_ADR 8 95 #endif /* CONFIG_CMD_NET */ 96 97 /* 98 * USB/EHCI 99 */ 100 #ifdef CONFIG_CMD_USB 101 #define CONFIG_USB_EHCI /* Enable EHCI USB support */ 102 #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ 103 #define CONFIG_EHCI_IS_TDI 104 #define CONFIG_USB_STORAGE 105 #define CONFIG_DOS_PARTITION 106 #define CONFIG_SUPPORT_VFAT 107 #endif /* CONFIG_CMD_USB */ 108 109 /* 110 * File system 111 */ 112 #define CONFIG_CMD_JFFS2 113 #define CONFIG_JFFS2_NAND 114 #define CONFIG_JFFS2_LZO 115 #define CONFIG_CMD_UBI 116 #define CONFIG_CMD_UBIFS 117 #define CONFIG_RBTREE 118 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 119 #define CONFIG_MTD_PARTITIONS 120 #define CONFIG_CMD_MTDPARTS 121 #define CONFIG_LZO 122 123 /* 124 * SATA 125 */ 126 #ifdef CONFIG_MVSATA_IDE 127 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 128 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 129 #endif 130 131 /* 132 * EFI partition 133 */ 134 #define CONFIG_EFI_PARTITION 135 136 /* 137 * Date Time 138 */ 139 #ifdef CONFIG_CMD_DATE 140 #define CONFIG_RTC_MV 141 #endif /* CONFIG_CMD_DATE */ 142 143 #define CONFIG_KIRKWOOD_GPIO 144 145 #endif /* _CONFIG_NAS220_H */ 146 147