xref: /openbmc/u-boot/include/configs/nas220.h (revision 29b103c7)
1 /*
2  * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
3  *
4  * based on work from:
5  * (C) Copyright 2009
6  * Marvell Semiconductor <www.marvell.com>
7  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #ifndef _CONFIG_NAS220_H
13 #define _CONFIG_NAS220_H
14 
15 /*
16  * Machine type definition and ID
17  */
18 #define MACH_TYPE_NAS220		MACH_TYPE_RD88F6192_NAS
19 #define CONFIG_MACH_TYPE		MACH_TYPE_NAS220
20 #define CONFIG_IDENT_STRING		"\nNAS 220"
21 
22 /*
23  * High Level Configuration Options (easy to change)
24  */
25 #define CONFIG_FEROCEON_88FR131		/* #define CPU Core subversion */
26 #define CONFIG_KW88F6192		/* SOC Name */
27 #define CONFIG_SYS_GENERIC_BOARD
28 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
29 
30 /* power-on led, regulator, sata0, sata1 */
31 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
32 #define NAS220_GE_OE_VAL_HIGH (0)
33 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
34 #define NAS220_GE_OE_HIGH (~(0))
35 
36 /* PHY related */
37 #define MV88E1116_LED_FCTRL_REG		10
38 #define MV88E1116_CPRSP_CR3_REG		21
39 #define MV88E1116_MAC_CTRL_REG		21
40 #define MV88E1116_PGADR_REG		22
41 #define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
42 #define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)
43 
44 /*
45  * Commands configuration
46  */
47 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
48 #define CONFIG_CMD_DHCP
49 #define CONFIG_CMD_MII
50 #define CONFIG_CMD_NAND
51 #define CONFIG_CMD_PING
52 #define CONFIG_CMD_USB
53 #define CONFIG_CMD_DATE
54 #define CONFIG_CMD_IDE
55 #define CONFIG_SYS_LONGHELP
56 #define CONFIG_AUTO_COMPLETE
57 #define CONFIG_CMDLINE_EDITING
58 #define CONFIG_SYS_HUSH_PARSER
59 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
60 
61 /*
62  * mv-common.h should be defined after CMD configs since it used them
63  * to enable certain macros
64  */
65 #include "mv-common.h"
66 
67 /* Remove or override few declarations from mv-common.h */
68 #undef CONFIG_SYS_PROMPT	/* previously defined in mv-common.h */
69 #define CONFIG_SYS_PROMPT "nas220> "
70 
71 /*
72  *  Environment variables configurations
73  */
74 #ifdef CONFIG_CMD_NAND
75 #define CONFIG_ENV_IS_IN_NAND
76 #define CONFIG_ENV_SECT_SIZE 0x10000
77 #else
78 #define CONFIG_ENV_IS_NOWHERE
79 #endif
80 
81 #define CONFIG_ENV_SIZE	0x10000
82 #define CONFIG_ENV_OFFSET 0xa0000
83 
84 /*
85  * Default environment variables
86  */
87 #define CONFIG_BOOTCOMMAND ""
88 
89 #define CONFIG_EXTRA_ENV_SETTINGS \
90 	"bootargs=console=ttyS0,115200\0" \
91 	"mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
92 	"0x010000@0xa0000(env),"\
93 	"0x500000@0xc0000(uimage),"\
94 	"0x1a40000@0x5c0000(rootfs)\0" \
95 	"mtdids=nand0=orion_nand\0"\
96 	"bootdelay=-1\0"\
97 	"autostart=no\0"\
98 	"autoload=no\0"
99 
100 /*
101  * Ethernet Driver configuration
102  */
103 #ifdef CONFIG_CMD_NET
104 #define CONFIG_MVGBE_PORTS {1, 0}	/* enable port 0 only */
105 #define CONFIG_PHY_BASE_ADR 8
106 #endif /* CONFIG_CMD_NET */
107 
108 /*
109  * USB/EHCI
110  */
111 #ifdef CONFIG_CMD_USB
112 #define CONFIG_USB_EHCI			/* Enable EHCI USB support */
113 #define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
114 #define CONFIG_EHCI_IS_TDI
115 #define CONFIG_USB_STORAGE
116 #define CONFIG_DOS_PARTITION
117 #define CONFIG_SUPPORT_VFAT
118 #endif /* CONFIG_CMD_USB */
119 
120 /*
121  * File system
122  */
123 #define CONFIG_CMD_EXT2
124 #define CONFIG_CMD_EXT4
125 #define CONFIG_CMD_FAT
126 #define CONFIG_CMD_JFFS2
127 #define CONFIG_JFFS2_NAND
128 #define CONFIG_JFFS2_LZO
129 #define CONFIG_CMD_UBI
130 #define CONFIG_CMD_UBIFS
131 #define CONFIG_RBTREE
132 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
133 #define CONFIG_MTD_PARTITIONS
134 #define CONFIG_CMD_MTDPARTS
135 #define CONFIG_LZO
136 
137 /*
138  * SATA
139  */
140 #ifdef CONFIG_MVSATA_IDE
141 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
142 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
143 #endif
144 
145 
146 /*
147  * Device Tree
148  */
149 #define CONFIG_OF_LIBFDT
150 
151 /*
152  * EFI partition
153  */
154 #define CONFIG_EFI_PARTITION
155 
156 /*
157  *  Date Time
158  */
159 #ifdef CONFIG_CMD_DATE
160 #define CONFIG_RTC_MV
161 #endif /* CONFIG_CMD_DATE */
162 
163 #define CONFIG_KIRKWOOD_GPIO
164 
165 #endif /* _CONFIG_NAS220_H */
166 
167