1 /*
2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Freescale i.MX7D SABRESD board.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __MX7D_SABRESD_CONFIG_H
10 #define __MX7D_SABRESD_CONFIG_H
11 
12 #include "mx7_common.h"
13 
14 #define CONFIG_DBG_MONITOR
15 #define PHYS_SDRAM_SIZE			SZ_1G
16 
17 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
18 
19 /* Size of malloc() pool */
20 #define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
21 
22 /* Network */
23 #define CONFIG_FEC_MXC
24 #define CONFIG_MII
25 #define CONFIG_FEC_XCV_TYPE             RGMII
26 #define CONFIG_ETHPRIME                 "FEC"
27 #define CONFIG_FEC_MXC_PHYADDR          0
28 
29 #define CONFIG_PHYLIB
30 #define CONFIG_PHY_BROADCOM
31 /* ENET1 */
32 #define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
33 
34 /* MMC Config*/
35 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
36 
37 #undef CONFIG_BOOTM_NETBSD
38 #undef CONFIG_BOOTM_PLAN9
39 #undef CONFIG_BOOTM_RTEMS
40 
41 /* I2C configs */
42 #define CONFIG_SYS_I2C_MXC
43 #define CONFIG_SYS_I2C_SPEED		100000
44 
45 #define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
46 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
47 
48 #ifdef CONFIG_IMX_BOOTAUX
49 /* Set to QSPI1 A flash at default */
50 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
51 
52 #define UPDATE_M4_ENV \
53 	"m4image=m4_qspi.bin\0" \
54 	"loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
55 	"update_m4_from_sd=" \
56 		"if sf probe 0:0; then " \
57 			"if run loadm4image; then " \
58 				"setexpr fw_sz ${filesize} + 0xffff; " \
59 				"setexpr fw_sz ${fw_sz} / 0x10000; "	\
60 				"setexpr fw_sz ${fw_sz} * 0x10000; "	\
61 				"sf erase 0x0 ${fw_sz}; " \
62 				"sf write ${loadaddr} 0x0 ${filesize}; " \
63 			"fi; " \
64 		"fi\0" \
65 	"m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
66 #else
67 #define UPDATE_M4_ENV ""
68 #endif
69 
70 #define CONFIG_MFG_ENV_SETTINGS \
71 	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
72 		"rdinit=/linuxrc " \
73 		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
74 		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
75 		"g_mass_storage.iSerialNumber=\"\" "\
76 		"clk_ignore_unused "\
77 		"\0" \
78 	"initrd_addr=0x83800000\0" \
79 	"initrd_high=0xffffffff\0" \
80 	"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
81 
82 #define CONFIG_DFU_ENV_SETTINGS \
83 	"dfu_alt_info=image raw 0 0x800000;"\
84 		"u-boot raw 0 0x4000;"\
85 		"bootimg part 0 1;"\
86 		"rootfs part 0 2\0" \
87 
88 #define CONFIG_EXTRA_ENV_SETTINGS \
89 	UPDATE_M4_ENV \
90 	CONFIG_MFG_ENV_SETTINGS \
91 	CONFIG_DFU_ENV_SETTINGS \
92 	"script=boot.scr\0" \
93 	"image=zImage\0" \
94 	"console=ttymxc0\0" \
95 	"fdt_high=0xffffffff\0" \
96 	"initrd_high=0xffffffff\0" \
97 	"fdt_file=imx7d-sdb.dtb\0" \
98 	"fdt_addr=0x83000000\0" \
99 	"boot_fdt=try\0" \
100 	"ip_dyn=yes\0" \
101 	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
102 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
103 	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
104 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
105 	"mmcautodetect=yes\0" \
106 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
107 		"root=${mmcroot}\0" \
108 	"loadbootscript=" \
109 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
110 	"bootscript=echo Running bootscript from mmc ...; " \
111 		"source\0" \
112 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
113 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
114 	"mmcboot=echo Booting from mmc ...; " \
115 		"run mmcargs; " \
116 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
117 			"if run loadfdt; then " \
118 				"bootz ${loadaddr} - ${fdt_addr}; " \
119 			"else " \
120 				"if test ${boot_fdt} = try; then " \
121 					"bootz; " \
122 				"else " \
123 					"echo WARN: Cannot load the DT; " \
124 				"fi; " \
125 			"fi; " \
126 		"else " \
127 			"bootz; " \
128 		"fi;\0" \
129 	"netargs=setenv bootargs console=${console},${baudrate} " \
130 		"root=/dev/nfs " \
131 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
132 		"netboot=echo Booting from net ...; " \
133 		"run netargs; " \
134 		"if test ${ip_dyn} = yes; then " \
135 			"setenv get_cmd dhcp; " \
136 		"else " \
137 			"setenv get_cmd tftp; " \
138 		"fi; " \
139 		"${get_cmd} ${image}; " \
140 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
141 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
142 				"bootz ${loadaddr} - ${fdt_addr}; " \
143 			"else " \
144 				"if test ${boot_fdt} = try; then " \
145 					"bootz; " \
146 				"else " \
147 					"echo WARN: Cannot load the DT; " \
148 				"fi; " \
149 			"fi; " \
150 		"else " \
151 			"bootz; " \
152 		"fi;\0"
153 
154 #define CONFIG_BOOTCOMMAND \
155 	   "mmc dev ${mmcdev};" \
156 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
157 		   "if run loadbootscript; then " \
158 			   "run bootscript; " \
159 		   "else " \
160 			   "if run loadimage; then " \
161 				   "run mmcboot; " \
162 			   "else run netboot; " \
163 			   "fi; " \
164 		   "fi; " \
165 	   "else run netboot; fi"
166 
167 #define CONFIG_SYS_MEMTEST_START	0x80000000
168 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)
169 
170 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
171 #define CONFIG_SYS_HZ			1000
172 
173 /* Physical Memory Map */
174 #define CONFIG_NR_DRAM_BANKS		1
175 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
176 
177 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
178 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
179 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
180 
181 #define CONFIG_SYS_INIT_SP_OFFSET \
182 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
183 #define CONFIG_SYS_INIT_SP_ADDR \
184 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
185 
186 /* environment organization */
187 #define CONFIG_ENV_SIZE			SZ_8K
188 
189 /*
190  * If want to use nand, define CONFIG_NAND_MXS and rework board
191  * to support nand, since emmc has pin conflicts with nand
192  */
193 #ifdef CONFIG_NAND_MXS
194 #define CONFIG_CMD_NAND
195 #define CONFIG_CMD_NAND_TRIMFFS
196 
197 /* NAND stuff */
198 #define CONFIG_SYS_MAX_NAND_DEVICE	1
199 #define CONFIG_SYS_NAND_BASE		0x40000000
200 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
201 #define CONFIG_SYS_NAND_ONFI_DETECTION
202 
203 /* DMA stuff, needed for GPMI/MXS NAND support */
204 #define CONFIG_APBH_DMA
205 #define CONFIG_APBH_DMA_BURST
206 #define CONFIG_APBH_DMA_BURST8
207 #endif
208 
209 #define CONFIG_ENV_OFFSET		(12 * SZ_64K)
210 #ifdef CONFIG_NAND_MXS
211 #define CONFIG_SYS_FSL_USDHC_NUM	1
212 #else
213 #define CONFIG_SYS_FSL_USDHC_NUM	2
214 #endif
215 
216 #define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
217 #define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
218 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
219 
220 /* USB Configs */
221 #define CONFIG_USB_HOST_ETHER
222 #define CONFIG_USB_ETHER_ASIX
223 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
224 
225 #define CONFIG_IMX_THERMAL
226 
227 #define CONFIG_USBD_HS
228 
229 #define CONFIG_USB_FUNCTION_MASS_STORAGE
230 
231 #ifdef CONFIG_VIDEO
232 #define CONFIG_VIDEO_MXS
233 #define CONFIG_VIDEO_LOGO
234 #define CONFIG_SPLASH_SCREEN
235 #define CONFIG_SPLASH_SCREEN_ALIGN
236 #define CONFIG_BMP_16BPP
237 #define CONFIG_VIDEO_BMP_RLE8
238 #define CONFIG_VIDEO_BMP_LOGO
239 #endif
240 
241 #ifdef CONFIG_FSL_QSPI
242 #define CONFIG_SPI_FLASH
243 #define CONFIG_SPI_FLASH_MACRONIX
244 #define CONFIG_SPI_FLASH_BAR
245 #define CONFIG_SF_DEFAULT_BUS		0
246 #define CONFIG_SF_DEFAULT_CS		0
247 #define CONFIG_SF_DEFAULT_SPEED		40000000
248 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
249 #define FSL_QSPI_FLASH_NUM		1
250 #define FSL_QSPI_FLASH_SIZE		SZ_64M
251 #define QSPI0_BASE_ADDR			QSPI1_IPS_BASE_ADDR
252 #define QSPI0_AMBA_BASE			QSPI0_ARB_BASE_ADDR
253 #endif
254 
255 #endif	/* __CONFIG_H */
256