1 /*
2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Freescale i.MX7D SABRESD board.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __MX7D_SABRESD_CONFIG_H
10 #define __MX7D_SABRESD_CONFIG_H
11 
12 #include "mx7_common.h"
13 
14 #define CONFIG_DBG_MONITOR
15 #define PHYS_SDRAM_SIZE			SZ_1G
16 
17 /* Uncomment to enable secure boot support */
18 /* #define CONFIG_SECURE_BOOT */
19 #define CONFIG_CSF_SIZE			0x4000
20 
21 /* Network */
22 #define CONFIG_CMD_MII
23 #define CONFIG_FEC_MXC
24 #define CONFIG_MII
25 #define CONFIG_FEC_XCV_TYPE             RGMII
26 #define CONFIG_ETHPRIME                 "FEC"
27 #define CONFIG_FEC_MXC_PHYADDR          0
28 
29 #define CONFIG_PHYLIB
30 #define CONFIG_PHY_BROADCOM
31 /* ENET1 */
32 #define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
33 
34 /* MMC Config*/
35 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
36 
37 /* PMIC */
38 #define CONFIG_POWER
39 #define CONFIG_POWER_I2C
40 #define CONFIG_POWER_PFUZE3000
41 #define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
42 
43 #undef CONFIG_BOOTM_NETBSD
44 #undef CONFIG_BOOTM_PLAN9
45 #undef CONFIG_BOOTM_RTEMS
46 
47 #undef CONFIG_CMD_EXPORTENV
48 #undef CONFIG_CMD_IMPORTENV
49 
50 /* I2C configs */
51 #define CONFIG_CMD_I2C
52 #define CONFIG_SYS_I2C
53 #define CONFIG_SYS_I2C_MXC
54 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
55 #define CONFIG_SYS_I2C_SPEED		100000
56 
57 #define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
58 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
59 
60 #define CONFIG_MFG_ENV_SETTINGS \
61 	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
62 		"rdinit=/linuxrc " \
63 		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
64 		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
65 		"g_mass_storage.iSerialNumber=\"\" "\
66 		"clk_ignore_unused "\
67 		"\0" \
68 	"initrd_addr=0x83800000\0" \
69 	"initrd_high=0xffffffff\0" \
70 	"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
71 
72 #define CONFIG_DFU_ENV_SETTINGS \
73 	"dfu_alt_info=image raw 0 0x800000;"\
74 		"u-boot raw 0 0x4000;"\
75 		"bootimg part 0 1;"\
76 		"rootfs part 0 2\0" \
77 
78 #define CONFIG_EXTRA_ENV_SETTINGS \
79 	CONFIG_MFG_ENV_SETTINGS \
80 	CONFIG_DFU_ENV_SETTINGS \
81 	"script=boot.scr\0" \
82 	"image=zImage\0" \
83 	"console=ttymxc0\0" \
84 	"fdt_high=0xffffffff\0" \
85 	"initrd_high=0xffffffff\0" \
86 	"fdt_file=imx7d-sdb.dtb\0" \
87 	"fdt_addr=0x83000000\0" \
88 	"boot_fdt=try\0" \
89 	"ip_dyn=yes\0" \
90 	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
91 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
92 	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
93 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
94 	"mmcautodetect=yes\0" \
95 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
96 		"root=${mmcroot}\0" \
97 	"loadbootscript=" \
98 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
99 	"bootscript=echo Running bootscript from mmc ...; " \
100 		"source\0" \
101 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
102 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
103 	"mmcboot=echo Booting from mmc ...; " \
104 		"run mmcargs; " \
105 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
106 			"if run loadfdt; then " \
107 				"bootz ${loadaddr} - ${fdt_addr}; " \
108 			"else " \
109 				"if test ${boot_fdt} = try; then " \
110 					"bootz; " \
111 				"else " \
112 					"echo WARN: Cannot load the DT; " \
113 				"fi; " \
114 			"fi; " \
115 		"else " \
116 			"bootz; " \
117 		"fi;\0" \
118 	"netargs=setenv bootargs console=${console},${baudrate} " \
119 		"root=/dev/nfs " \
120 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
121 		"netboot=echo Booting from net ...; " \
122 		"run netargs; " \
123 		"if test ${ip_dyn} = yes; then " \
124 			"setenv get_cmd dhcp; " \
125 		"else " \
126 			"setenv get_cmd tftp; " \
127 		"fi; " \
128 		"${get_cmd} ${image}; " \
129 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
130 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
131 				"bootz ${loadaddr} - ${fdt_addr}; " \
132 			"else " \
133 				"if test ${boot_fdt} = try; then " \
134 					"bootz; " \
135 				"else " \
136 					"echo WARN: Cannot load the DT; " \
137 				"fi; " \
138 			"fi; " \
139 		"else " \
140 			"bootz; " \
141 		"fi;\0"
142 
143 #define CONFIG_BOOTCOMMAND \
144 	   "mmc dev ${mmcdev};" \
145 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
146 		   "if run loadbootscript; then " \
147 			   "run bootscript; " \
148 		   "else " \
149 			   "if run loadimage; then " \
150 				   "run mmcboot; " \
151 			   "else run netboot; " \
152 			   "fi; " \
153 		   "fi; " \
154 	   "else run netboot; fi"
155 
156 #define CONFIG_CMD_MEMTEST
157 #define CONFIG_SYS_MEMTEST_START	0x80000000
158 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)
159 
160 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
161 #define CONFIG_SYS_HZ			1000
162 
163 #define CONFIG_STACKSIZE		SZ_128K
164 
165 /* Physical Memory Map */
166 #define CONFIG_NR_DRAM_BANKS		1
167 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
168 
169 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
170 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
171 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
172 
173 #define CONFIG_SYS_INIT_SP_OFFSET \
174 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
175 #define CONFIG_SYS_INIT_SP_ADDR \
176 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
177 
178 /* FLASH and environment organization */
179 #define CONFIG_SYS_NO_FLASH
180 #define CONFIG_ENV_SIZE			SZ_8K
181 #define CONFIG_ENV_IS_IN_MMC
182 #define CONFIG_ENV_OFFSET		(8 * SZ_64K)
183 #define CONFIG_SYS_FSL_USDHC_NUM	2
184 
185 #define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
186 #define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
187 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
188 
189 /* USB Configs */
190 #define CONFIG_CMD_USB
191 #define CONFIG_USB_EHCI
192 #define CONFIG_USB_EHCI_MX7
193 #define CONFIG_USB_STORAGE
194 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
195 #define CONFIG_USB_HOST_ETHER
196 #define CONFIG_USB_ETHER_ASIX
197 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
198 #define CONFIG_MXC_USB_FLAGS   0
199 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
200 
201 #define CONFIG_IMX_THERMAL
202 
203 #define CONFIG_CI_UDC
204 #define CONFIG_USBD_HS
205 #define CONFIG_USB_GADGET_DUALSPEED
206 
207 #define CONFIG_USB_GADGET
208 #define CONFIG_CMD_USB_MASS_STORAGE
209 #define CONFIG_USB_FUNCTION_MASS_STORAGE
210 #define CONFIG_USB_GADGET_DOWNLOAD
211 #define CONFIG_USB_GADGET_VBUS_DRAW	2
212 
213 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
214 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
215 #define CONFIG_G_DNL_MANUFACTURER	"FSL"
216 
217 /* USB Device Firmware Update support */
218 #define CONFIG_CMD_DFU
219 #define CONFIG_USB_FUNCTION_DFU
220 #define CONFIG_DFU_MMC
221 #define CONFIG_DFU_RAM
222 
223 #define CONFIG_VIDEO
224 #ifdef CONFIG_VIDEO
225 #define CONFIG_CFB_CONSOLE
226 #define CONFIG_VIDEO_MXS
227 #define CONFIG_VIDEO_LOGO
228 #define CONFIG_VIDEO_SW_CURSOR
229 #define CONFIG_VGA_AS_SINGLE_DEVICE
230 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
231 #define CONFIG_SPLASH_SCREEN
232 #define CONFIG_SPLASH_SCREEN_ALIGN
233 #define CONFIG_CMD_BMP
234 #define CONFIG_BMP_16BPP
235 #define CONFIG_VIDEO_BMP_RLE8
236 #define CONFIG_VIDEO_BMP_LOGO
237 #endif
238 
239 #endif	/* __CONFIG_H */
240