1 /* 2 * Copyright (C) 2015 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the Freescale i.MX7D SABRESD board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __MX7D_SABRESD_CONFIG_H 10 #define __MX7D_SABRESD_CONFIG_H 11 12 #include "mx7_common.h" 13 14 #define CONFIG_DBG_MONITOR 15 #define PHYS_SDRAM_SIZE SZ_1G 16 17 #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR 18 19 /* Size of malloc() pool */ 20 #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) 21 22 /* Network */ 23 #define CONFIG_FEC_MXC 24 #define CONFIG_MII 25 #define CONFIG_FEC_XCV_TYPE RGMII 26 #define CONFIG_ETHPRIME "FEC" 27 #define CONFIG_FEC_MXC_PHYADDR 0 28 29 #define CONFIG_PHY_BROADCOM 30 /* ENET1 */ 31 #define IMX_FEC_BASE ENET_IPS_BASE_ADDR 32 33 /* MMC Config*/ 34 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 35 36 #undef CONFIG_BOOTM_NETBSD 37 #undef CONFIG_BOOTM_PLAN9 38 #undef CONFIG_BOOTM_RTEMS 39 40 /* I2C configs */ 41 #define CONFIG_SYS_I2C_MXC 42 #define CONFIG_SYS_I2C_SPEED 100000 43 44 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 45 #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 46 47 #ifdef CONFIG_IMX_BOOTAUX 48 /* Set to QSPI1 A flash at default */ 49 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000 50 51 #define UPDATE_M4_ENV \ 52 "m4image=m4_qspi.bin\0" \ 53 "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \ 54 "update_m4_from_sd=" \ 55 "if sf probe 0:0; then " \ 56 "if run loadm4image; then " \ 57 "setexpr fw_sz ${filesize} + 0xffff; " \ 58 "setexpr fw_sz ${fw_sz} / 0x10000; " \ 59 "setexpr fw_sz ${fw_sz} * 0x10000; " \ 60 "sf erase 0x0 ${fw_sz}; " \ 61 "sf write ${loadaddr} 0x0 ${filesize}; " \ 62 "fi; " \ 63 "fi\0" \ 64 "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0" 65 #else 66 #define UPDATE_M4_ENV "" 67 #endif 68 69 #define CONFIG_MFG_ENV_SETTINGS \ 70 "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ 71 "rdinit=/linuxrc " \ 72 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ 73 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ 74 "g_mass_storage.iSerialNumber=\"\" "\ 75 "clk_ignore_unused "\ 76 "\0" \ 77 "initrd_addr=0x83800000\0" \ 78 "initrd_high=0xffffffff\0" \ 79 "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ 80 81 #define CONFIG_DFU_ENV_SETTINGS \ 82 "dfu_alt_info=image raw 0 0x800000;"\ 83 "u-boot raw 0 0x4000;"\ 84 "bootimg part 0 1;"\ 85 "rootfs part 0 2\0" \ 86 87 #define CONFIG_EXTRA_ENV_SETTINGS \ 88 UPDATE_M4_ENV \ 89 CONFIG_MFG_ENV_SETTINGS \ 90 CONFIG_DFU_ENV_SETTINGS \ 91 "script=boot.scr\0" \ 92 "image=zImage\0" \ 93 "console=ttymxc0\0" \ 94 "fdt_high=0xffffffff\0" \ 95 "initrd_high=0xffffffff\0" \ 96 "fdt_file=imx7d-sdb.dtb\0" \ 97 "fdt_addr=0x83000000\0" \ 98 "boot_fdt=try\0" \ 99 "ip_dyn=yes\0" \ 100 "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \ 101 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ 102 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ 103 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ 104 "mmcautodetect=yes\0" \ 105 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 106 "root=${mmcroot}\0" \ 107 "loadbootscript=" \ 108 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 109 "bootscript=echo Running bootscript from mmc ...; " \ 110 "source\0" \ 111 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 112 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 113 "mmcboot=echo Booting from mmc ...; " \ 114 "run mmcargs; " \ 115 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 116 "if run loadfdt; then " \ 117 "bootz ${loadaddr} - ${fdt_addr}; " \ 118 "else " \ 119 "if test ${boot_fdt} = try; then " \ 120 "bootz; " \ 121 "else " \ 122 "echo WARN: Cannot load the DT; " \ 123 "fi; " \ 124 "fi; " \ 125 "else " \ 126 "bootz; " \ 127 "fi;\0" \ 128 "netargs=setenv bootargs console=${console},${baudrate} " \ 129 "root=/dev/nfs " \ 130 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 131 "netboot=echo Booting from net ...; " \ 132 "run netargs; " \ 133 "if test ${ip_dyn} = yes; then " \ 134 "setenv get_cmd dhcp; " \ 135 "else " \ 136 "setenv get_cmd tftp; " \ 137 "fi; " \ 138 "${get_cmd} ${image}; " \ 139 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 140 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 141 "bootz ${loadaddr} - ${fdt_addr}; " \ 142 "else " \ 143 "if test ${boot_fdt} = try; then " \ 144 "bootz; " \ 145 "else " \ 146 "echo WARN: Cannot load the DT; " \ 147 "fi; " \ 148 "fi; " \ 149 "else " \ 150 "bootz; " \ 151 "fi;\0" 152 153 #define CONFIG_BOOTCOMMAND \ 154 "mmc dev ${mmcdev};" \ 155 "mmc dev ${mmcdev}; if mmc rescan; then " \ 156 "if run loadbootscript; then " \ 157 "run bootscript; " \ 158 "else " \ 159 "if run loadimage; then " \ 160 "run mmcboot; " \ 161 "else run netboot; " \ 162 "fi; " \ 163 "fi; " \ 164 "else run netboot; fi" 165 166 #define CONFIG_SYS_MEMTEST_START 0x80000000 167 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000) 168 169 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 170 #define CONFIG_SYS_HZ 1000 171 172 /* Physical Memory Map */ 173 #define CONFIG_NR_DRAM_BANKS 1 174 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 175 176 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 177 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 178 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 179 180 #define CONFIG_SYS_INIT_SP_OFFSET \ 181 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 182 #define CONFIG_SYS_INIT_SP_ADDR \ 183 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 184 185 /* environment organization */ 186 #define CONFIG_ENV_SIZE SZ_8K 187 188 /* 189 * If want to use nand, define CONFIG_NAND_MXS and rework board 190 * to support nand, since emmc has pin conflicts with nand 191 */ 192 #ifdef CONFIG_NAND_MXS 193 /* NAND stuff */ 194 #define CONFIG_SYS_MAX_NAND_DEVICE 1 195 #define CONFIG_SYS_NAND_BASE 0x40000000 196 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 197 #define CONFIG_SYS_NAND_ONFI_DETECTION 198 199 /* DMA stuff, needed for GPMI/MXS NAND support */ 200 #define CONFIG_APBH_DMA 201 #define CONFIG_APBH_DMA_BURST 202 #define CONFIG_APBH_DMA_BURST8 203 #endif 204 205 #define CONFIG_ENV_OFFSET (12 * SZ_64K) 206 #ifdef CONFIG_NAND_MXS 207 #define CONFIG_SYS_FSL_USDHC_NUM 1 208 #else 209 #define CONFIG_SYS_FSL_USDHC_NUM 2 210 #endif 211 212 #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ 213 #define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ 214 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ 215 216 /* USB Configs */ 217 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 218 219 #define CONFIG_IMX_THERMAL 220 221 #define CONFIG_USBD_HS 222 223 #ifdef CONFIG_VIDEO 224 #define CONFIG_VIDEO_MXS 225 #define CONFIG_VIDEO_LOGO 226 #define CONFIG_SPLASH_SCREEN 227 #define CONFIG_SPLASH_SCREEN_ALIGN 228 #define CONFIG_BMP_16BPP 229 #define CONFIG_VIDEO_BMP_RLE8 230 #define CONFIG_VIDEO_BMP_LOGO 231 #endif 232 233 #ifdef CONFIG_FSL_QSPI 234 #define CONFIG_SPI_FLASH 235 #define CONFIG_SPI_FLASH_MACRONIX 236 #define CONFIG_SPI_FLASH_BAR 237 #define CONFIG_SF_DEFAULT_BUS 0 238 #define CONFIG_SF_DEFAULT_CS 0 239 #define CONFIG_SF_DEFAULT_SPEED 40000000 240 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 241 #define FSL_QSPI_FLASH_NUM 1 242 #define FSL_QSPI_FLASH_SIZE SZ_64M 243 #define QSPI0_BASE_ADDR QSPI1_IPS_BASE_ADDR 244 #define QSPI0_AMBA_BASE QSPI0_ARB_BASE_ADDR 245 #endif 246 247 #endif /* __CONFIG_H */ 248