1 /*
2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 #ifndef __MX6UL_14X14_EVK_CONFIG_H
9 #define __MX6UL_14X14_EVK_CONFIG_H
10 
11 
12 #include <asm/arch/imx-regs.h>
13 #include <linux/sizes.h>
14 #include "mx6_common.h"
15 #include <asm/imx-common/gpio.h>
16 
17 #define is_mx6ul_9x9_evk()	CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
18 
19 /* SPL options */
20 #define CONFIG_SPL_LIBCOMMON_SUPPORT
21 #define CONFIG_SPL_MMC_SUPPORT
22 #include "imx6_spl.h"
23 
24 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
25 
26 #define CONFIG_DISPLAY_CPUINFO
27 #define CONFIG_DISPLAY_BOARDINFO
28 
29 /* Size of malloc() pool */
30 #define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
31 
32 #define CONFIG_BOARD_EARLY_INIT_F
33 #define CONFIG_BOARD_LATE_INIT
34 
35 #define CONFIG_MXC_UART
36 #define CONFIG_MXC_UART_BASE		UART1_BASE
37 
38 /* MMC Configs */
39 #ifdef CONFIG_FSL_USDHC
40 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
41 
42 /* NAND pin conflicts with usdhc2 */
43 #ifdef CONFIG_NAND_MXS
44 #define CONFIG_SYS_FSL_USDHC_NUM	1
45 #else
46 #define CONFIG_SYS_FSL_USDHC_NUM	2
47 #endif
48 
49 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
50 #endif
51 
52 /* I2C configs */
53 #define CONFIG_CMD_I2C
54 #ifdef CONFIG_CMD_I2C
55 #define CONFIG_SYS_I2C
56 #define CONFIG_SYS_I2C_MXC
57 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
58 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
59 #define CONFIG_SYS_I2C_SPEED		100000
60 
61 /* PMIC only for 9X9 EVK */
62 #define CONFIG_POWER
63 #define CONFIG_POWER_I2C
64 #define CONFIG_POWER_PFUZE3000
65 #define CONFIG_POWER_PFUZE3000_I2C_ADDR  0x08
66 #endif
67 
68 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
69 
70 #define CONFIG_EXTRA_ENV_SETTINGS \
71 	"script=boot.scr\0" \
72 	"image=zImage\0" \
73 	"console=ttymxc0\0" \
74 	"fdt_high=0xffffffff\0" \
75 	"initrd_high=0xffffffff\0" \
76 	"fdt_file=undefined\0" \
77 	"fdt_addr=0x83000000\0" \
78 	"boot_fdt=try\0" \
79 	"ip_dyn=yes\0" \
80 	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
81 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
82 	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
83 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
84 	"mmcautodetect=yes\0" \
85 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
86 		"root=${mmcroot}\0" \
87 	"loadbootscript=" \
88 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
89 	"bootscript=echo Running bootscript from mmc ...; " \
90 		"source\0" \
91 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
92 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
93 	"mmcboot=echo Booting from mmc ...; " \
94 		"run mmcargs; " \
95 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
96 			"if run loadfdt; then " \
97 				"bootz ${loadaddr} - ${fdt_addr}; " \
98 			"else " \
99 				"if test ${boot_fdt} = try; then " \
100 					"bootz; " \
101 				"else " \
102 					"echo WARN: Cannot load the DT; " \
103 				"fi; " \
104 			"fi; " \
105 		"else " \
106 			"bootz; " \
107 		"fi;\0" \
108 	"netargs=setenv bootargs console=${console},${baudrate} " \
109 		"root=/dev/nfs " \
110 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
111 		"netboot=echo Booting from net ...; " \
112 		"run netargs; " \
113 		"if test ${ip_dyn} = yes; then " \
114 			"setenv get_cmd dhcp; " \
115 		"else " \
116 			"setenv get_cmd tftp; " \
117 		"fi; " \
118 		"${get_cmd} ${image}; " \
119 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
120 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
121 				"bootz ${loadaddr} - ${fdt_addr}; " \
122 			"else " \
123 				"if test ${boot_fdt} = try; then " \
124 					"bootz; " \
125 				"else " \
126 					"echo WARN: Cannot load the DT; " \
127 				"fi; " \
128 			"fi; " \
129 		"else " \
130 			"bootz; " \
131 		"fi;\0" \
132 		"findfdt="\
133 			"if test $fdt_file = undefined; then " \
134 				"if test $board_name = EVK && test $board_rev = 9X9; then " \
135 					"setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
136 				"if test $board_name = EVK && test $board_rev = 14X14; then " \
137 					"setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
138 				"if test $fdt_file = undefined; then " \
139 					"echo WARNING: Could not determine dtb to use; fi; " \
140 			"fi;\0" \
141 
142 #define CONFIG_BOOTCOMMAND \
143 	   "run findfdt;" \
144 	   "mmc dev ${mmcdev};" \
145 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
146 		   "if run loadbootscript; then " \
147 			   "run bootscript; " \
148 		   "else " \
149 			   "if run loadimage; then " \
150 				   "run mmcboot; " \
151 			   "else run netboot; " \
152 			   "fi; " \
153 		   "fi; " \
154 	   "else run netboot; fi"
155 
156 /* Miscellaneous configurable options */
157 #define CONFIG_CMD_MEMTEST
158 #define CONFIG_SYS_MEMTEST_START	0x80000000
159 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000000)
160 
161 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
162 #define CONFIG_SYS_HZ			1000
163 
164 #define CONFIG_CMDLINE_EDITING
165 #define CONFIG_STACKSIZE		SZ_128K
166 
167 /* Physical Memory Map */
168 #define CONFIG_NR_DRAM_BANKS		1
169 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
170 
171 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
172 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
173 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
174 
175 #define CONFIG_SYS_INIT_SP_OFFSET \
176 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
177 #define CONFIG_SYS_INIT_SP_ADDR \
178 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
179 
180 /* FLASH and environment organization */
181 #define CONFIG_SYS_NO_FLASH
182 
183 #define CONFIG_ENV_SIZE			SZ_8K
184 #define CONFIG_ENV_IS_IN_MMC
185 #define CONFIG_ENV_OFFSET		(8 * SZ_64K)
186 #define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
187 #define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
188 #define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
189 
190 #define CONFIG_OF_LIBFDT
191 #define CONFIG_CMD_BOOTZ
192 #define CONFIG_CMD_BMODE
193 
194 #ifndef CONFIG_SYS_DCACHE_OFF
195 #define CONFIG_CMD_CACHE
196 #endif
197 
198 #ifdef CONFIG_FSL_QSPI
199 #define CONFIG_CMD_SF
200 #define CONFIG_SPI_FLASH
201 #define CONFIG_SPI_FLASH_BAR
202 #define CONFIG_SF_DEFAULT_BUS		0
203 #define CONFIG_SF_DEFAULT_CS		0
204 #define CONFIG_SF_DEFAULT_SPEED	40000000
205 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
206 #define FSL_QSPI_FLASH_NUM		1
207 #define FSL_QSPI_FLASH_SIZE		SZ_32M
208 #endif
209 
210 /* USB Configs */
211 #define CONFIG_CMD_USB
212 #ifdef CONFIG_CMD_USB
213 #define CONFIG_USB_EHCI
214 #define CONFIG_USB_EHCI_MX6
215 #define CONFIG_USB_STORAGE
216 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
217 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
218 #define CONFIG_MXC_USB_FLAGS   0
219 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
220 #endif
221 
222 #ifdef CONFIG_CMD_NET
223 #define CONFIG_FEC_MXC
224 #define CONFIG_MII
225 #define CONFIG_FEC_ENET_DEV		1
226 
227 #if (CONFIG_FEC_ENET_DEV == 0)
228 #define IMX_FEC_BASE			ENET_BASE_ADDR
229 #define CONFIG_FEC_MXC_PHYADDR          0x2
230 #define CONFIG_FEC_XCV_TYPE             RMII
231 #elif (CONFIG_FEC_ENET_DEV == 1)
232 #define IMX_FEC_BASE			ENET2_BASE_ADDR
233 #define CONFIG_FEC_MXC_PHYADDR		0x1
234 #define CONFIG_FEC_XCV_TYPE		RMII
235 #endif
236 #define CONFIG_ETHPRIME			"FEC"
237 
238 #define CONFIG_PHYLIB
239 #define CONFIG_PHY_MICREL
240 #endif
241 
242 #define CONFIG_IMX_THERMAL
243 
244 #ifndef CONFIG_SPL_BUILD
245 #define CONFIG_VIDEO
246 #ifdef CONFIG_VIDEO
247 #define CONFIG_CFB_CONSOLE
248 #define CONFIG_VIDEO_MXS
249 #define CONFIG_VIDEO_LOGO
250 #define CONFIG_VIDEO_SW_CURSOR
251 #define CONFIG_VGA_AS_SINGLE_DEVICE
252 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
253 #define CONFIG_SPLASH_SCREEN
254 #define CONFIG_SPLASH_SCREEN_ALIGN
255 #define CONFIG_CMD_BMP
256 #define CONFIG_BMP_16BPP
257 #define CONFIG_VIDEO_BMP_RLE8
258 #define CONFIG_VIDEO_BMP_LOGO
259 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
260 #endif
261 #endif
262 
263 #endif
264