1 /* 2 * Copyright (C) 2015 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the Freescale i.MX6UL 14x14 EVK board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 #ifndef __MX6UL_14X14_EVK_CONFIG_H 9 #define __MX6UL_14X14_EVK_CONFIG_H 10 11 12 #include <asm/arch/imx-regs.h> 13 #include <linux/sizes.h> 14 #include "mx6_common.h" 15 #include <asm/imx-common/gpio.h> 16 17 /* SPL options */ 18 #define CONFIG_SPL_LIBCOMMON_SUPPORT 19 #define CONFIG_SPL_MMC_SUPPORT 20 #define CONFIG_SPL_FAT_SUPPORT 21 #include "imx6_spl.h" 22 23 #define CONFIG_MX6 24 #define CONFIG_ROM_UNIFIED_SECTIONS 25 #define CONFIG_SYS_GENERIC_BOARD 26 #define CONFIG_DISPLAY_CPUINFO 27 #define CONFIG_DISPLAY_BOARDINFO 28 29 /* Size of malloc() pool */ 30 #define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) 31 32 #define CONFIG_BOARD_EARLY_INIT_F 33 #define CONFIG_BOARD_LATE_INIT 34 35 #define CONFIG_MXC_UART 36 #define CONFIG_MXC_UART_BASE UART1_BASE 37 38 #define CONFIG_CMD_FUSE 39 #ifdef CONFIG_CMD_FUSE 40 #define CONFIG_MXC_OCOTP 41 #endif 42 43 /* MMC Configs */ 44 #ifdef CONFIG_FSL_USDHC 45 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 46 47 /* NAND pin conflicts with usdhc2 */ 48 #ifdef CONFIG_NAND_MXS 49 #define CONFIG_SYS_FSL_USDHC_NUM 1 50 #else 51 #define CONFIG_SYS_FSL_USDHC_NUM 2 52 #endif 53 54 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 55 #endif 56 57 #undef CONFIG_BOOTM_NETBSD 58 #undef CONFIG_BOOTM_PLAN9 59 #undef CONFIG_BOOTM_RTEMS 60 61 #undef CONFIG_CMD_EXPORTENV 62 #undef CONFIG_CMD_IMPORTENV 63 64 /* I2C configs */ 65 #define CONFIG_CMD_I2C 66 #ifdef CONFIG_CMD_I2C 67 #define CONFIG_SYS_I2C 68 #define CONFIG_SYS_I2C_MXC 69 #define CONFIG_SYS_I2C_SPEED 100000 70 #endif 71 72 #define PHYS_SDRAM_SIZE SZ_512M 73 74 #undef CONFIG_CMD_IMLS 75 76 #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 77 78 #define CONFIG_EXTRA_ENV_SETTINGS \ 79 "script=boot.scr\0" \ 80 "image=zImage\0" \ 81 "console=ttymxc0\0" \ 82 "fdt_high=0xffffffff\0" \ 83 "initrd_high=0xffffffff\0" \ 84 "fdt_file=imx6ul-14x14-evk.dtb\0" \ 85 "fdt_addr=0x83000000\0" \ 86 "boot_fdt=try\0" \ 87 "ip_dyn=yes\0" \ 88 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ 89 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ 90 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ 91 "mmcautodetect=yes\0" \ 92 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 93 "root=${mmcroot}\0" \ 94 "loadbootscript=" \ 95 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 96 "bootscript=echo Running bootscript from mmc ...; " \ 97 "source\0" \ 98 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 99 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 100 "mmcboot=echo Booting from mmc ...; " \ 101 "run mmcargs; " \ 102 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 103 "if run loadfdt; then " \ 104 "bootz ${loadaddr} - ${fdt_addr}; " \ 105 "else " \ 106 "if test ${boot_fdt} = try; then " \ 107 "bootz; " \ 108 "else " \ 109 "echo WARN: Cannot load the DT; " \ 110 "fi; " \ 111 "fi; " \ 112 "else " \ 113 "bootz; " \ 114 "fi;\0" \ 115 "netargs=setenv bootargs console=${console},${baudrate} " \ 116 "root=/dev/nfs " \ 117 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 118 "netboot=echo Booting from net ...; " \ 119 "run netargs; " \ 120 "if test ${ip_dyn} = yes; then " \ 121 "setenv get_cmd dhcp; " \ 122 "else " \ 123 "setenv get_cmd tftp; " \ 124 "fi; " \ 125 "${get_cmd} ${image}; " \ 126 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 127 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 128 "bootz ${loadaddr} - ${fdt_addr}; " \ 129 "else " \ 130 "if test ${boot_fdt} = try; then " \ 131 "bootz; " \ 132 "else " \ 133 "echo WARN: Cannot load the DT; " \ 134 "fi; " \ 135 "fi; " \ 136 "else " \ 137 "bootz; " \ 138 "fi;\0" 139 140 #define CONFIG_BOOTCOMMAND \ 141 "mmc dev ${mmcdev};" \ 142 "mmc dev ${mmcdev}; if mmc rescan; then " \ 143 "if run loadbootscript; then " \ 144 "run bootscript; " \ 145 "else " \ 146 "if run loadimage; then " \ 147 "run mmcboot; " \ 148 "else run netboot; " \ 149 "fi; " \ 150 "fi; " \ 151 "else run netboot; fi" 152 153 /* Miscellaneous configurable options */ 154 #define CONFIG_SYS_PROMPT "=> " 155 /* Print Buffer Size */ 156 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 157 158 #define CONFIG_CMD_MEMTEST 159 #define CONFIG_SYS_MEMTEST_START 0x80000000 160 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000) 161 162 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 163 #define CONFIG_SYS_HZ 1000 164 165 #define CONFIG_CMDLINE_EDITING 166 #define CONFIG_STACKSIZE SZ_128K 167 168 /* Physical Memory Map */ 169 #define CONFIG_NR_DRAM_BANKS 1 170 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 171 172 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 173 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 174 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 175 176 #define CONFIG_SYS_INIT_SP_OFFSET \ 177 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 178 #define CONFIG_SYS_INIT_SP_ADDR \ 179 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 180 181 /* FLASH and environment organization */ 182 #define CONFIG_SYS_NO_FLASH 183 184 #define CONFIG_ENV_SIZE SZ_8K 185 #define CONFIG_ENV_IS_IN_MMC 186 #define CONFIG_ENV_OFFSET (8 * SZ_64K) 187 #define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ 188 #define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ 189 #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ 190 191 #define CONFIG_OF_LIBFDT 192 #define CONFIG_CMD_BOOTZ 193 #define CONFIG_CMD_BMODE 194 195 #ifndef CONFIG_SYS_DCACHE_OFF 196 #define CONFIG_CMD_CACHE 197 #endif 198 199 #define CONFIG_FSL_QSPI 200 #ifdef CONFIG_FSL_QSPI 201 #define CONFIG_CMD_SF 202 #define CONFIG_SPI_FLASH 203 #define CONFIG_SPI_FLASH_STMICRO 204 #define CONFIG_SPI_FLASH_BAR 205 #define CONFIG_SF_DEFAULT_BUS 0 206 #define CONFIG_SF_DEFAULT_CS 0 207 #define CONFIG_SF_DEFAULT_SPEED 40000000 208 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 209 #define FSL_QSPI_FLASH_NUM 1 210 #define FSL_QSPI_FLASH_SIZE SZ_32M 211 #endif 212 213 /* USB Configs */ 214 #define CONFIG_CMD_USB 215 #ifdef CONFIG_CMD_USB 216 #define CONFIG_USB_EHCI 217 #define CONFIG_USB_EHCI_MX6 218 #define CONFIG_USB_STORAGE 219 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 220 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 221 #define CONFIG_MXC_USB_FLAGS 0 222 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 223 #endif 224 225 #define CONFIG_IMX6_THERMAL 226 227 #endif 228