1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the Freescale i.MX6SX Sabresd board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #include <asm/arch/imx-regs.h> 14 #include <linux/sizes.h> 15 #include "mx6_common.h" 16 17 #define CONFIG_MX6 18 #define CONFIG_DISPLAY_CPUINFO 19 #define CONFIG_DISPLAY_BOARDINFO 20 21 #ifdef CONFIG_SPL 22 #define CONFIG_SPL_LIBCOMMON_SUPPORT 23 #define CONFIG_SPL_MMC_SUPPORT 24 #include "imx6_spl.h" 25 #endif 26 27 #define CONFIG_CMDLINE_TAG 28 #define CONFIG_SETUP_MEMORY_TAGS 29 #define CONFIG_INITRD_TAG 30 #define CONFIG_REVISION_TAG 31 #define CONFIG_SYS_GENERIC_BOARD 32 33 /* Size of malloc() pool */ 34 #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) 35 36 #define CONFIG_BOARD_EARLY_INIT_F 37 #define CONFIG_MXC_GPIO 38 39 #define CONFIG_MXC_UART 40 #define CONFIG_MXC_UART_BASE UART1_BASE 41 42 /* allow to overwrite serial and ethaddr */ 43 #define CONFIG_ENV_OVERWRITE 44 #define CONFIG_CONS_INDEX 1 45 #define CONFIG_BAUDRATE 115200 46 47 /* Command definition */ 48 #include <config_cmd_default.h> 49 50 #undef CONFIG_CMD_IMLS 51 52 #define CONFIG_BOOTDELAY 3 53 54 #define CONFIG_LOADADDR 0x80800000 55 #define CONFIG_SYS_TEXT_BASE 0x87800000 56 57 #define CONFIG_EXTRA_ENV_SETTINGS \ 58 "script=boot.scr\0" \ 59 "image=zImage\0" \ 60 "console=ttymxc0\0" \ 61 "fdt_high=0xffffffff\0" \ 62 "initrd_high=0xffffffff\0" \ 63 "fdt_file=imx6sx-sdb.dtb\0" \ 64 "fdt_addr=0x88000000\0" \ 65 "boot_fdt=try\0" \ 66 "ip_dyn=yes\0" \ 67 "mmcdev=2\0" \ 68 "mmcpart=1\0" \ 69 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ 70 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 71 "root=${mmcroot}\0" \ 72 "loadbootscript=" \ 73 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 74 "bootscript=echo Running bootscript from mmc ...; " \ 75 "source\0" \ 76 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 77 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 78 "mmcboot=echo Booting from mmc ...; " \ 79 "run mmcargs; " \ 80 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 81 "if run loadfdt; then " \ 82 "bootz ${loadaddr} - ${fdt_addr}; " \ 83 "else " \ 84 "if test ${boot_fdt} = try; then " \ 85 "bootz; " \ 86 "else " \ 87 "echo WARN: Cannot load the DT; " \ 88 "fi; " \ 89 "fi; " \ 90 "else " \ 91 "bootz; " \ 92 "fi;\0" \ 93 "netargs=setenv bootargs console=${console},${baudrate} " \ 94 "root=/dev/nfs " \ 95 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 96 "netboot=echo Booting from net ...; " \ 97 "run netargs; " \ 98 "if test ${ip_dyn} = yes; then " \ 99 "setenv get_cmd dhcp; " \ 100 "else " \ 101 "setenv get_cmd tftp; " \ 102 "fi; " \ 103 "${get_cmd} ${image}; " \ 104 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 105 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 106 "bootz ${loadaddr} - ${fdt_addr}; " \ 107 "else " \ 108 "if test ${boot_fdt} = try; then " \ 109 "bootz; " \ 110 "else " \ 111 "echo WARN: Cannot load the DT; " \ 112 "fi; " \ 113 "fi; " \ 114 "else " \ 115 "bootz; " \ 116 "fi;\0" 117 118 #define CONFIG_BOOTCOMMAND \ 119 "mmc dev ${mmcdev};" \ 120 "mmc dev ${mmcdev}; if mmc rescan; then " \ 121 "if run loadbootscript; then " \ 122 "run bootscript; " \ 123 "else " \ 124 "if run loadimage; then " \ 125 "run mmcboot; " \ 126 "else run netboot; " \ 127 "fi; " \ 128 "fi; " \ 129 "else run netboot; fi" 130 131 /* Miscellaneous configurable options */ 132 #define CONFIG_SYS_LONGHELP 133 #define CONFIG_SYS_HUSH_PARSER 134 #define CONFIG_AUTO_COMPLETE 135 #define CONFIG_SYS_CBSIZE 1024 136 137 #define CONFIG_SYS_MAXARGS 256 138 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 139 140 #define CONFIG_SYS_MEMTEST_START 0x80000000 141 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) 142 143 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 144 145 #define CONFIG_CMDLINE_EDITING 146 #define CONFIG_STACKSIZE SZ_128K 147 148 /* Physical Memory Map */ 149 #define CONFIG_NR_DRAM_BANKS 1 150 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 151 #define PHYS_SDRAM_SIZE SZ_1G 152 153 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 154 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 155 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 156 157 #define CONFIG_SYS_INIT_SP_OFFSET \ 158 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 159 #define CONFIG_SYS_INIT_SP_ADDR \ 160 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 161 162 /* MMC Configuration */ 163 #define CONFIG_FSL_ESDHC 164 #define CONFIG_FSL_USDHC 165 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR 166 167 #define CONFIG_MMC 168 #define CONFIG_CMD_MMC 169 #define CONFIG_GENERIC_MMC 170 #define CONFIG_BOUNCE_BUFFER 171 #define CONFIG_CMD_EXT2 172 #define CONFIG_CMD_FAT 173 #define CONFIG_DOS_PARTITION 174 175 /* I2C Configs */ 176 #define CONFIG_CMD_I2C 177 #define CONFIG_SYS_I2C 178 #define CONFIG_SYS_I2C_MXC 179 #define CONFIG_SYS_I2C_SPEED 100000 180 181 /* PMIC */ 182 #define CONFIG_POWER 183 #define CONFIG_POWER_I2C 184 #define CONFIG_POWER_PFUZE100 185 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 186 187 /* Network */ 188 #define CONFIG_CMD_PING 189 #define CONFIG_CMD_DHCP 190 #define CONFIG_CMD_MII 191 #define CONFIG_CMD_NET 192 #define CONFIG_FEC_MXC 193 #define CONFIG_MII 194 195 #define IMX_FEC_BASE ENET_BASE_ADDR 196 #define CONFIG_FEC_MXC_PHYADDR 0x1 197 198 #define CONFIG_FEC_XCV_TYPE RGMII 199 #define CONFIG_ETHPRIME "FEC" 200 201 #define CONFIG_PHYLIB 202 #define CONFIG_PHY_ATHEROS 203 204 205 #define CONFIG_CMD_USB 206 #ifdef CONFIG_CMD_USB 207 #define CONFIG_USB_EHCI 208 #define CONFIG_USB_EHCI_MX6 209 #define CONFIG_USB_STORAGE 210 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 211 #define CONFIG_USB_HOST_ETHER 212 #define CONFIG_USB_ETHER_ASIX 213 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 214 #define CONFIG_MXC_USB_FLAGS 0 215 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 216 #endif 217 218 #define CONFIG_CMD_PCI 219 #ifdef CONFIG_CMD_PCI 220 #define CONFIG_PCI 221 #define CONFIG_PCI_PNP 222 #define CONFIG_PCI_SCAN_SHOW 223 #define CONFIG_PCIE_IMX 224 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 0) 225 #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) 226 #endif 227 228 #define CONFIG_IMX6_THERMAL 229 230 #define CONFIG_CMD_FUSE 231 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) 232 #define CONFIG_MXC_OCOTP 233 #endif 234 235 /* FLASH and environment organization */ 236 #define CONFIG_SYS_NO_FLASH 237 238 #define CONFIG_CMD_TIME 239 240 #define CONFIG_FSL_QSPI 241 242 #ifdef CONFIG_FSL_QSPI 243 #define CONFIG_CMD_SF 244 #define CONFIG_SPI_FLASH 245 #define CONFIG_SPI_FLASH_BAR 246 #define CONFIG_SPI_FLASH_SPANSION 247 #define CONFIG_SPI_FLASH_STMICRO 248 #define CONFIG_SYS_FSL_QSPI_LE 249 #define CONFIG_SYS_FSL_QSPI_AHB 250 #ifdef CONFIG_MX6SX_SABRESD_REVA 251 #define FSL_QSPI_FLASH_SIZE SZ_16M 252 #else 253 #define FSL_QSPI_FLASH_SIZE SZ_32M 254 #endif 255 #define FSL_QSPI_FLASH_NUM 2 256 #endif 257 258 #define CONFIG_ENV_OFFSET (8 * SZ_64K) 259 #define CONFIG_ENV_SIZE SZ_8K 260 #define CONFIG_ENV_IS_IN_MMC 261 262 #define CONFIG_OF_LIBFDT 263 #define CONFIG_CMD_BOOTZ 264 265 #ifndef CONFIG_SYS_DCACHE_OFF 266 #define CONFIG_CMD_CACHE 267 #endif 268 269 #define CONFIG_SYS_FSL_USDHC_NUM 3 270 #if defined(CONFIG_ENV_IS_IN_MMC) 271 #define CONFIG_SYS_MMC_ENV_DEV 2 /*USDHC4*/ 272 #endif 273 274 #endif /* __CONFIG_H */ 275