1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the Freescale i.MX6SX Sabreauto board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #include "mx6_common.h" 14 15 16 /* Size of malloc() pool */ 17 #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) 18 19 #define CONFIG_BOARD_EARLY_INIT_F 20 #define CONFIG_BOARD_LATE_INIT 21 22 #define CONFIG_MXC_UART 23 #define CONFIG_MXC_UART_BASE UART1_BASE 24 25 #define CONFIG_EXTRA_ENV_SETTINGS \ 26 "script=boot.scr\0" \ 27 "image=zImage\0" \ 28 "console=ttymxc0\0" \ 29 "fdt_high=0xffffffff\0" \ 30 "initrd_high=0xffffffff\0" \ 31 "fdt_file=imx6sx-sabreauto.dtb\0" \ 32 "fdt_addr=0x88000000\0" \ 33 "boot_fdt=try\0" \ 34 "ip_dyn=yes\0" \ 35 "mmcdev=0\0" \ 36 "mmcpart=1\0" \ 37 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ 38 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 39 "root=${mmcroot}\0" \ 40 "loadbootscript=" \ 41 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 42 "bootscript=echo Running bootscript from mmc ...; " \ 43 "source\0" \ 44 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 45 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 46 "mmcboot=echo Booting from mmc ...; " \ 47 "run mmcargs; " \ 48 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 49 "if run loadfdt; then " \ 50 "bootz ${loadaddr} - ${fdt_addr}; " \ 51 "else " \ 52 "if test ${boot_fdt} = try; then " \ 53 "bootz; " \ 54 "else " \ 55 "echo WARN: Cannot load the DT; " \ 56 "fi; " \ 57 "fi; " \ 58 "else " \ 59 "bootz; " \ 60 "fi;\0" \ 61 "netargs=setenv bootargs console=${console},${baudrate} " \ 62 "root=/dev/nfs " \ 63 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 64 "netboot=echo Booting from net ...; " \ 65 "run netargs; " \ 66 "if test ${ip_dyn} = yes; then " \ 67 "setenv get_cmd dhcp; " \ 68 "else " \ 69 "setenv get_cmd tftp; " \ 70 "fi; " \ 71 "${get_cmd} ${image}; " \ 72 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 73 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 74 "bootz ${loadaddr} - ${fdt_addr}; " \ 75 "else " \ 76 "if test ${boot_fdt} = try; then " \ 77 "bootz; " \ 78 "else " \ 79 "echo WARN: Cannot load the DT; " \ 80 "fi; " \ 81 "fi; " \ 82 "else " \ 83 "bootz; " \ 84 "fi;\0" 85 86 #define CONFIG_BOOTCOMMAND \ 87 "mmc dev ${mmcdev};" \ 88 "mmc dev ${mmcdev}; if mmc rescan; then " \ 89 "if run loadbootscript; then " \ 90 "run bootscript; " \ 91 "else " \ 92 "if run loadimage; then " \ 93 "run mmcboot; " \ 94 "else run netboot; " \ 95 "fi; " \ 96 "fi; " \ 97 "else run netboot; fi" 98 99 /* Miscellaneous configurable options */ 100 #define CONFIG_SYS_MEMTEST_START 0x80000000 101 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) 102 103 #define CONFIG_STACKSIZE SZ_128K 104 105 /* Physical Memory Map */ 106 #define CONFIG_NR_DRAM_BANKS 1 107 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 108 #define PHYS_SDRAM_SIZE SZ_2G 109 110 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 111 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 112 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 113 114 #define CONFIG_SYS_INIT_SP_OFFSET \ 115 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 116 #define CONFIG_SYS_INIT_SP_ADDR \ 117 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 118 119 /* MMC Configuration */ 120 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR 121 122 /* I2C Configs */ 123 #define CONFIG_CMD_I2C 124 #define CONFIG_SYS_I2C 125 #define CONFIG_SYS_I2C_MXC 126 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 127 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 128 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 129 #define CONFIG_SYS_I2C_SPEED 100000 130 131 /* PMIC */ 132 #define CONFIG_POWER 133 #define CONFIG_POWER_I2C 134 #define CONFIG_POWER_PFUZE100 135 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 136 137 /* NAND flash command */ 138 #define CONFIG_CMD_NAND 139 #define CONFIG_CMD_NAND_TRIMFFS 140 141 /* NAND stuff */ 142 #define CONFIG_NAND_MXS 143 #define CONFIG_SYS_MAX_NAND_DEVICE 1 144 #define CONFIG_SYS_NAND_BASE 0x40000000 145 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 146 #define CONFIG_SYS_NAND_ONFI_DETECTION 147 148 /* DMA stuff, needed for GPMI/MXS NAND support */ 149 #define CONFIG_APBH_DMA 150 #define CONFIG_APBH_DMA_BURST 151 #define CONFIG_APBH_DMA_BURST8 152 153 /* Network */ 154 #define CONFIG_CMD_PING 155 #define CONFIG_CMD_DHCP 156 #define CONFIG_CMD_MII 157 158 #define CONFIG_FEC_MXC 159 #define CONFIG_MII 160 161 #define IMX_FEC_BASE ENET2_BASE_ADDR 162 #define CONFIG_FEC_MXC_PHYADDR 0x0 163 164 #define CONFIG_FEC_XCV_TYPE RGMII 165 #define CONFIG_ETHPRIME "FEC" 166 167 #define CONFIG_PHYLIB 168 #define CONFIG_PHY_ATHEROS 169 170 171 #define CONFIG_CMD_USB 172 #ifdef CONFIG_CMD_USB 173 #define CONFIG_USB_EHCI 174 #define CONFIG_USB_EHCI_MX6 175 #define CONFIG_USB_STORAGE 176 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 177 #define CONFIG_USB_HOST_ETHER 178 #define CONFIG_USB_ETHER_ASIX 179 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 180 #define CONFIG_MXC_USB_FLAGS 0 181 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 182 #endif 183 184 #define CONFIG_IMX_THERMAL 185 186 #define CONFIG_CMD_TIME 187 188 #define CONFIG_FSL_QSPI 189 #ifdef CONFIG_FSL_QSPI 190 #define CONFIG_CMD_SF 191 #define CONFIG_SYS_FSL_QSPI_AHB 192 #define CONFIG_SF_DEFAULT_BUS 0 193 #define CONFIG_SF_DEFAULT_CS 0 194 #define CONFIG_SF_DEFAULT_SPEED 40000000 195 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 196 #define FSL_QSPI_FLASH_SIZE SZ_32M 197 #define FSL_QSPI_FLASH_NUM 2 198 #endif 199 200 #define CONFIG_ENV_OFFSET (8 * SZ_64K) 201 #define CONFIG_ENV_SIZE SZ_8K 202 #define CONFIG_ENV_IS_IN_MMC 203 204 #define CONFIG_SYS_FSL_USDHC_NUM 2 205 #if defined(CONFIG_ENV_IS_IN_MMC) 206 #define CONFIG_SYS_MMC_ENV_DEV 0 /*USDHC3*/ 207 #endif 208 209 #define CONFIG_PCA953X 210 #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} } 211 212 #endif /* __CONFIG_H */ 213