1 /*
2  * Copyright 2014 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Freescale i.MX6SX Sabreauto board.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 #include "mx6_common.h"
13 
14 /* Size of malloc() pool */
15 #define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
16 
17 #define CONFIG_BOARD_EARLY_INIT_F
18 #define CONFIG_BOARD_LATE_INIT
19 
20 #define CONFIG_MXC_UART
21 #define CONFIG_MXC_UART_BASE		UART1_BASE
22 
23 #define CONFIG_EXTRA_ENV_SETTINGS \
24 	"script=boot.scr\0" \
25 	"image=zImage\0" \
26 	"console=ttymxc0\0" \
27 	"fdt_high=0xffffffff\0" \
28 	"initrd_high=0xffffffff\0" \
29 	"fdt_file=imx6sx-sabreauto.dtb\0" \
30 	"fdt_addr=0x88000000\0" \
31 	"boot_fdt=try\0" \
32 	"ip_dyn=yes\0" \
33 	"mmcdev=0\0" \
34 	"mmcpart=1\0" \
35 	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
36 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
37 		"root=${mmcroot}\0" \
38 	"loadbootscript=" \
39 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
40 	"bootscript=echo Running bootscript from mmc ...; " \
41 		"source\0" \
42 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
43 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
44 	"mmcboot=echo Booting from mmc ...; " \
45 		"run mmcargs; " \
46 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
47 			"if run loadfdt; then " \
48 				"bootz ${loadaddr} - ${fdt_addr}; " \
49 			"else " \
50 				"if test ${boot_fdt} = try; then " \
51 					"bootz; " \
52 				"else " \
53 					"echo WARN: Cannot load the DT; " \
54 				"fi; " \
55 			"fi; " \
56 		"else " \
57 			"bootz; " \
58 		"fi;\0" \
59 	"netargs=setenv bootargs console=${console},${baudrate} " \
60 		"root=/dev/nfs " \
61 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
62 		"netboot=echo Booting from net ...; " \
63 		"run netargs; " \
64 		"if test ${ip_dyn} = yes; then " \
65 			"setenv get_cmd dhcp; " \
66 		"else " \
67 			"setenv get_cmd tftp; " \
68 		"fi; " \
69 		"${get_cmd} ${image}; " \
70 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
71 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
72 				"bootz ${loadaddr} - ${fdt_addr}; " \
73 			"else " \
74 				"if test ${boot_fdt} = try; then " \
75 					"bootz; " \
76 				"else " \
77 					"echo WARN: Cannot load the DT; " \
78 				"fi; " \
79 			"fi; " \
80 		"else " \
81 			"bootz; " \
82 		"fi;\0"
83 
84 #define CONFIG_BOOTCOMMAND \
85 	   "mmc dev ${mmcdev};" \
86 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
87 		   "if run loadbootscript; then " \
88 			   "run bootscript; " \
89 		   "else " \
90 			   "if run loadimage; then " \
91 				   "run mmcboot; " \
92 			   "else run netboot; " \
93 			   "fi; " \
94 		   "fi; " \
95 	   "else run netboot; fi"
96 
97 /* Miscellaneous configurable options */
98 #define CONFIG_SYS_MEMTEST_START	0x80000000
99 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000)
100 
101 #define CONFIG_STACKSIZE		SZ_128K
102 
103 /* Physical Memory Map */
104 #define CONFIG_NR_DRAM_BANKS		1
105 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
106 
107 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
108 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
109 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
110 
111 #define CONFIG_SYS_INIT_SP_OFFSET \
112 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
113 #define CONFIG_SYS_INIT_SP_ADDR \
114 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
115 
116 /* MMC Configuration */
117 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC3_BASE_ADDR
118 
119 /* I2C Configs */
120 #define CONFIG_SYS_I2C
121 #define CONFIG_SYS_I2C_MXC
122 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
123 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
124 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
125 #define CONFIG_SYS_I2C_SPEED		  100000
126 
127 /* PMIC */
128 #define CONFIG_POWER
129 #define CONFIG_POWER_I2C
130 #define CONFIG_POWER_PFUZE100
131 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
132 
133 /* NAND flash command */
134 #define CONFIG_CMD_NAND
135 #define CONFIG_CMD_NAND_TRIMFFS
136 
137 /* NAND stuff */
138 #define CONFIG_NAND_MXS
139 #define CONFIG_SYS_MAX_NAND_DEVICE     1
140 #define CONFIG_SYS_NAND_BASE           0x40000000
141 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
142 #define CONFIG_SYS_NAND_ONFI_DETECTION
143 
144 /* DMA stuff, needed for GPMI/MXS NAND support */
145 #define CONFIG_APBH_DMA
146 #define CONFIG_APBH_DMA_BURST
147 #define CONFIG_APBH_DMA_BURST8
148 
149 /* Network */
150 
151 #define CONFIG_FEC_MXC
152 #define CONFIG_MII
153 
154 #define IMX_FEC_BASE			ENET2_BASE_ADDR
155 #define CONFIG_FEC_MXC_PHYADDR          0x0
156 
157 #define CONFIG_FEC_XCV_TYPE             RGMII
158 #define CONFIG_ETHPRIME                 "FEC"
159 
160 #define CONFIG_PHYLIB
161 #define CONFIG_PHY_ATHEROS
162 
163 #ifdef CONFIG_CMD_USB
164 #define CONFIG_USB_EHCI
165 #define CONFIG_USB_EHCI_MX6
166 #define CONFIG_USB_STORAGE
167 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
168 #define CONFIG_USB_HOST_ETHER
169 #define CONFIG_USB_ETHER_ASIX
170 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
171 #define CONFIG_MXC_USB_FLAGS   0
172 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
173 #endif
174 
175 #define CONFIG_IMX_THERMAL
176 
177 #define CONFIG_FSL_QSPI
178 #ifdef CONFIG_FSL_QSPI
179 #define CONFIG_SYS_FSL_QSPI_AHB
180 #define CONFIG_SF_DEFAULT_BUS		0
181 #define CONFIG_SF_DEFAULT_CS		0
182 #define CONFIG_SF_DEFAULT_SPEED	40000000
183 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
184 #define FSL_QSPI_FLASH_SIZE		SZ_32M
185 #define FSL_QSPI_FLASH_NUM		2
186 #endif
187 
188 #define CONFIG_ENV_OFFSET		(8 * SZ_64K)
189 #define CONFIG_ENV_SIZE			SZ_8K
190 #define CONFIG_ENV_IS_IN_MMC
191 
192 #define CONFIG_SYS_FSL_USDHC_NUM	2
193 #if defined(CONFIG_ENV_IS_IN_MMC)
194 #define CONFIG_SYS_MMC_ENV_DEV		0  /*USDHC3*/
195 #endif
196 
197 #define CONFIG_PCA953X
198 #define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x30, 8}, {0x32, 8}, {0x34, 8} }
199 
200 #endif				/* __CONFIG_H */
201