xref: /openbmc/u-boot/include/configs/mx6sabresd.h (revision e9c847c3)
1 /*
2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __MX6QSABRESD_CONFIG_H
10 #define __MX6QSABRESD_CONFIG_H
11 
12 #ifdef CONFIG_SPL
13 #include "imx6_spl.h"
14 #undef CONFIG_SPL_EXT_SUPPORT
15 #endif
16 
17 #define CONFIG_MACH_TYPE	3980
18 #define CONFIG_MXC_UART_BASE	UART1_BASE
19 #define CONSOLE_DEV		"ttymxc0"
20 #define CONFIG_MMCROOT			"/dev/mmcblk1p2"
21 
22 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
23 
24 #include "mx6sabre_common.h"
25 
26 /* Falcon Mode */
27 #define CONFIG_CMD_SPL
28 #define CONFIG_SPL_OS_BOOT
29 #define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
30 #define CONFIG_CMD_SPL_WRITE_SIZE      (128 * SZ_1K)
31 
32 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
33 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
34 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
35 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1000  /* 2MB */
36 
37 #define CONFIG_SYS_FSL_USDHC_NUM	3
38 #if defined(CONFIG_ENV_IS_IN_MMC)
39 #define CONFIG_SYS_MMC_ENV_DEV		1	/* SDHC3 */
40 #endif
41 
42 #define CONFIG_CMD_PCI
43 #ifdef CONFIG_CMD_PCI
44 #define CONFIG_PCI_SCAN_SHOW
45 #define CONFIG_PCIE_IMX
46 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
47 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(3, 19)
48 #endif
49 
50 /* I2C Configs */
51 #define CONFIG_SYS_I2C
52 #define CONFIG_SYS_I2C_MXC
53 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
54 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
55 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
56 #define CONFIG_SYS_I2C_SPEED		  100000
57 
58 /* PMIC */
59 #define CONFIG_POWER
60 #define CONFIG_POWER_I2C
61 #define CONFIG_POWER_PFUZE100
62 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
63 
64 /* USB Configs */
65 #ifdef CONFIG_CMD_USB
66 #define CONFIG_USB_EHCI
67 #define CONFIG_USB_EHCI_MX6
68 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
69 #define CONFIG_USB_HOST_ETHER
70 #define CONFIG_USB_ETHER_ASIX
71 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
72 #define CONFIG_MXC_USB_FLAGS		0
73 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1 /* Enabled USB controller number */
74 #endif
75 
76 #endif                         /* __MX6QSABRESD_CONFIG_H */
77