xref: /openbmc/u-boot/include/configs/mx6sabresd.h (revision cf0bcd7d)
1 /*
2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __MX6SABRESD_CONFIG_H
10 #define __MX6SABRESD_CONFIG_H
11 
12 #ifdef CONFIG_SPL
13 #include "imx6_spl.h"
14 #endif
15 
16 #define CONFIG_MACH_TYPE	3980
17 #define CONFIG_MXC_UART_BASE	UART1_BASE
18 #define CONSOLE_DEV		"ttymxc0"
19 
20 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
21 
22 #include "mx6sabre_common.h"
23 
24 /* Falcon Mode */
25 #define CONFIG_SPL_FS_LOAD_ARGS_NAME	"args"
26 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME	"uImage"
27 #define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
28 
29 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
30 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
31 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
32 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1000  /* 2MB */
33 
34 #define CONFIG_SYS_FSL_USDHC_NUM	3
35 #if defined(CONFIG_ENV_IS_IN_MMC)
36 #define CONFIG_SYS_MMC_ENV_DEV		1	/* SDHC3 */
37 #endif
38 
39 #ifdef CONFIG_CMD_PCI
40 #define CONFIG_PCI_SCAN_SHOW
41 #define CONFIG_PCIE_IMX
42 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
43 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(3, 19)
44 #endif
45 
46 /* I2C Configs */
47 #define CONFIG_SYS_I2C
48 #define CONFIG_SYS_I2C_MXC
49 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
50 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
51 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
52 #define CONFIG_SYS_I2C_SPEED		  100000
53 
54 /* PMIC */
55 #define CONFIG_POWER
56 #define CONFIG_POWER_I2C
57 #define CONFIG_POWER_PFUZE100
58 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
59 
60 /* USB Configs */
61 #ifdef CONFIG_CMD_USB
62 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
63 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
64 #define CONFIG_MXC_USB_FLAGS		0
65 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1 /* Enabled USB controller number */
66 #endif
67 
68 #endif                         /* __MX6SABRESD_CONFIG_H */
69