1 /* 2 * Copyright (C) 2012 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the Freescale i.MX6Q SabreSD board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __MX6QSABRESD_CONFIG_H 10 #define __MX6QSABRESD_CONFIG_H 11 12 #ifdef CONFIG_SPL 13 #include "imx6_spl.h" 14 #endif 15 16 #define CONFIG_MACH_TYPE 3980 17 #define CONFIG_MXC_UART_BASE UART1_BASE 18 #define CONFIG_CONSOLE_DEV "ttymxc0" 19 #define CONFIG_MMCROOT "/dev/mmcblk1p2" 20 21 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 22 23 #include "mx6sabre_common.h" 24 25 #define CONFIG_SYS_FSL_USDHC_NUM 3 26 #if defined(CONFIG_ENV_IS_IN_MMC) 27 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */ 28 #endif 29 30 #define CONFIG_CMD_PCI 31 #ifdef CONFIG_CMD_PCI 32 #define CONFIG_PCI 33 #define CONFIG_PCI_PNP 34 #define CONFIG_PCI_SCAN_SHOW 35 #define CONFIG_PCIE_IMX 36 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) 37 #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19) 38 #endif 39 40 /* I2C Configs */ 41 #define CONFIG_SYS_I2C 42 #define CONFIG_SYS_I2C_MXC 43 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 44 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 45 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 46 #define CONFIG_SYS_I2C_SPEED 100000 47 48 /* PMIC */ 49 #define CONFIG_POWER 50 #define CONFIG_POWER_I2C 51 #define CONFIG_POWER_PFUZE100 52 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 53 54 /* USB Configs */ 55 #ifdef CONFIG_CMD_USB 56 #define CONFIG_USB_EHCI 57 #define CONFIG_USB_EHCI_MX6 58 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 59 #define CONFIG_USB_HOST_ETHER 60 #define CONFIG_USB_ETHER_ASIX 61 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 62 #define CONFIG_MXC_USB_FLAGS 0 63 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */ 64 #endif 65 66 #endif /* __MX6QSABRESD_CONFIG_H */ 67