1 /* 2 * Copyright (C) 2012 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the Freescale i.MX6Q SabreSD board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __MX6QSABRESD_CONFIG_H 10 #define __MX6QSABRESD_CONFIG_H 11 12 #ifdef CONFIG_SPL 13 #define CONFIG_SPL_LIBCOMMON_SUPPORT 14 #define CONFIG_SPL_MMC_SUPPORT 15 #include "imx6_spl.h" 16 #endif 17 18 #define CONFIG_MACH_TYPE 3980 19 #define CONFIG_MXC_UART_BASE UART1_BASE 20 #define CONFIG_CONSOLE_DEV "ttymxc0" 21 #define CONFIG_MMCROOT "/dev/mmcblk1p2" 22 #if defined(CONFIG_MX6Q) 23 #define CONFIG_DEFAULT_FDT_FILE "imx6q-sabresd.dtb" 24 #elif defined(CONFIG_MX6DL) 25 #define CONFIG_DEFAULT_FDT_FILE "imx6dl-sabresd.dtb" 26 #endif 27 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) 28 29 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 30 31 #include "mx6sabre_common.h" 32 33 #define CONFIG_SYS_FSL_USDHC_NUM 3 34 #if defined(CONFIG_ENV_IS_IN_MMC) 35 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */ 36 #endif 37 38 #define CONFIG_CMD_PCI 39 #ifdef CONFIG_CMD_PCI 40 #define CONFIG_PCI 41 #define CONFIG_PCI_PNP 42 #define CONFIG_PCI_SCAN_SHOW 43 #define CONFIG_PCIE_IMX 44 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) 45 #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19) 46 #endif 47 48 /* I2C Configs */ 49 #define CONFIG_CMD_I2C 50 #define CONFIG_SYS_I2C 51 #define CONFIG_SYS_I2C_MXC 52 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 53 #define CONFIG_SYS_I2C_SPEED 100000 54 55 /* PMIC */ 56 #define CONFIG_POWER 57 #define CONFIG_POWER_I2C 58 #define CONFIG_POWER_PFUZE100 59 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 60 61 /* USB Configs */ 62 #define CONFIG_CMD_USB 63 #ifdef CONFIG_CMD_USB 64 #define CONFIG_USB_EHCI 65 #define CONFIG_USB_EHCI_MX6 66 #define CONFIG_USB_STORAGE 67 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 68 #define CONFIG_USB_HOST_ETHER 69 #define CONFIG_USB_ETHER_ASIX 70 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 71 #define CONFIG_MXC_USB_FLAGS 0 72 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */ 73 #endif 74 75 #endif /* __MX6QSABRESD_CONFIG_H */ 76