1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2012 Freescale Semiconductor, Inc. 4 * 5 * Configuration settings for the Freescale i.MX6Q SabreSD board. 6 */ 7 8 #ifndef __MX6SABRESD_CONFIG_H 9 #define __MX6SABRESD_CONFIG_H 10 11 #ifdef CONFIG_SPL 12 #include "imx6_spl.h" 13 #endif 14 15 #define CONFIG_MACH_TYPE 3980 16 #define CONFIG_MXC_UART_BASE UART1_BASE 17 #define CONSOLE_DEV "ttymxc0" 18 19 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 20 21 #include "mx6sabre_common.h" 22 23 /* Falcon Mode */ 24 #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" 25 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" 26 #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 27 28 /* Falcon Mode - MMC support: args@1MB kernel@2MB */ 29 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ 30 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) 31 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */ 32 33 #define CONFIG_SYS_FSL_USDHC_NUM 3 34 #if defined(CONFIG_ENV_IS_IN_MMC) 35 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */ 36 #endif 37 38 #ifdef CONFIG_CMD_PCI 39 #define CONFIG_PCI_SCAN_SHOW 40 #define CONFIG_PCIE_IMX 41 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) 42 #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19) 43 #endif 44 45 /* I2C Configs */ 46 #define CONFIG_SYS_I2C 47 #define CONFIG_SYS_I2C_MXC 48 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 49 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 50 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 51 #define CONFIG_SYS_I2C_SPEED 100000 52 53 /* PMIC */ 54 #define CONFIG_POWER 55 #define CONFIG_POWER_I2C 56 #define CONFIG_POWER_PFUZE100 57 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 58 59 /* USB Configs */ 60 #ifdef CONFIG_CMD_USB 61 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 62 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 63 #define CONFIG_MXC_USB_FLAGS 0 64 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */ 65 #endif 66 67 #endif /* __MX6SABRESD_CONFIG_H */ 68