1 /* 2 * Copyright (C) 2012 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the Freescale i.MX6Q SabreSD board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __MX6QSABRESD_CONFIG_H 10 #define __MX6QSABRESD_CONFIG_H 11 12 #ifdef CONFIG_SPL 13 #include "imx6_spl.h" 14 #endif 15 16 #define CONFIG_MACH_TYPE 3980 17 #define CONFIG_MXC_UART_BASE UART1_BASE 18 #define CONSOLE_DEV "ttymxc0" 19 #define CONFIG_MMCROOT "/dev/mmcblk1p2" 20 21 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 22 23 #include "mx6sabre_common.h" 24 25 /* Falcon Mode */ 26 #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" 27 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" 28 #define CONFIG_CMD_SPL 29 #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 30 #define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) 31 32 /* Falcon Mode - MMC support: args@1MB kernel@2MB */ 33 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ 34 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) 35 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */ 36 37 #define CONFIG_SYS_FSL_USDHC_NUM 3 38 #if defined(CONFIG_ENV_IS_IN_MMC) 39 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */ 40 #endif 41 42 #define CONFIG_CMD_PCI 43 #ifdef CONFIG_CMD_PCI 44 #define CONFIG_PCI_SCAN_SHOW 45 #define CONFIG_PCIE_IMX 46 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) 47 #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19) 48 #endif 49 50 /* I2C Configs */ 51 #define CONFIG_SYS_I2C 52 #define CONFIG_SYS_I2C_MXC 53 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 54 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 55 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 56 #define CONFIG_SYS_I2C_SPEED 100000 57 58 /* PMIC */ 59 #define CONFIG_POWER 60 #define CONFIG_POWER_I2C 61 #define CONFIG_POWER_PFUZE100 62 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 63 64 /* USB Configs */ 65 #ifdef CONFIG_CMD_USB 66 #define CONFIG_USB_EHCI 67 #define CONFIG_USB_EHCI_MX6 68 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 69 #define CONFIG_USB_HOST_ETHER 70 #define CONFIG_USB_ETHER_ASIX 71 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 72 #define CONFIG_MXC_USB_FLAGS 0 73 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */ 74 #endif 75 76 #endif /* __MX6QSABRESD_CONFIG_H */ 77