1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2012 Freescale Semiconductor, Inc.
4  *
5  * Configuration settings for the Freescale i.MX6Q SabreSD board.
6  */
7 
8 #ifndef __MX6QSABRE_COMMON_CONFIG_H
9 #define __MX6QSABRE_COMMON_CONFIG_H
10 
11 #include "mx6_common.h"
12 
13 #define CONFIG_IMX_THERMAL
14 
15 /* Size of malloc() pool */
16 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
17 
18 #define CONFIG_MXC_UART
19 
20 /* MMC Configs */
21 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
22 
23 #define CONFIG_FEC_MXC
24 #define IMX_FEC_BASE			ENET_BASE_ADDR
25 #define CONFIG_FEC_XCV_TYPE		RGMII
26 #define CONFIG_ETHPRIME			"FEC"
27 #define CONFIG_FEC_MXC_PHYADDR		1
28 
29 #define CONFIG_PHY_ATHEROS
30 
31 #ifdef CONFIG_SUPPORT_EMMC_BOOT
32 #define EMMC_ENV \
33 	"emmcdev=2\0" \
34 	"update_emmc_firmware=" \
35 		"if test ${ip_dyn} = yes; then " \
36 			"setenv get_cmd dhcp; " \
37 		"else " \
38 			"setenv get_cmd tftp; " \
39 		"fi; " \
40 		"if ${get_cmd} ${update_sd_firmware_filename}; then " \
41 			"if mmc dev ${emmcdev} 1; then "	\
42 				"setexpr fw_sz ${filesize} / 0x200; " \
43 				"setexpr fw_sz ${fw_sz} + 1; "	\
44 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
45 			"fi; "	\
46 		"fi\0"
47 #else
48 #define EMMC_ENV ""
49 #endif
50 
51 #define CONFIG_EXTRA_ENV_SETTINGS \
52 	"script=boot.scr\0" \
53 	"image=zImage\0" \
54 	"fdt_file=undefined\0" \
55 	"fdt_addr=0x18000000\0" \
56 	"boot_fdt=try\0" \
57 	"ip_dyn=yes\0" \
58 	"console=" CONSOLE_DEV "\0" \
59 	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
60 	"dfu_alt_info_spl=spl raw 0x400\0" \
61 	"dfu_alt_info_img=u-boot raw 0x10000\0" \
62 	"dfu_alt_info=spl raw 0x400\0" \
63 	"fdt_high=0xffffffff\0"	  \
64 	"initrd_high=0xffffffff\0" \
65 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
66 	"mmcpart=1\0" \
67 	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
68 	"update_sd_firmware=" \
69 		"if test ${ip_dyn} = yes; then " \
70 			"setenv get_cmd dhcp; " \
71 		"else " \
72 			"setenv get_cmd tftp; " \
73 		"fi; " \
74 		"if mmc dev ${mmcdev}; then "	\
75 			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
76 				"setexpr fw_sz ${filesize} / 0x200; " \
77 				"setexpr fw_sz ${fw_sz} + 1; "	\
78 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
79 			"fi; "	\
80 		"fi\0" \
81 	EMMC_ENV	  \
82 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
83 		"root=PARTUUID=${uuid} rootwait rw\0" \
84 	"loadbootscript=" \
85 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
86 	"bootscript=echo Running bootscript from mmc ...; " \
87 		"source\0" \
88 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
89 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
90 	"mmcboot=echo Booting from mmc ...; " \
91 		"run finduuid; " \
92 		"run mmcargs; " \
93 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
94 			"if run loadfdt; then " \
95 				"bootz ${loadaddr} - ${fdt_addr}; " \
96 			"else " \
97 				"if test ${boot_fdt} = try; then " \
98 					"bootz; " \
99 				"else " \
100 					"echo WARN: Cannot load the DT; " \
101 				"fi; " \
102 			"fi; " \
103 		"else " \
104 			"bootz; " \
105 		"fi;\0" \
106 	"netargs=setenv bootargs console=${console},${baudrate} " \
107 		"root=/dev/nfs " \
108 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
109 	"netboot=echo Booting from net ...; " \
110 		"run netargs; " \
111 		"if test ${ip_dyn} = yes; then " \
112 			"setenv get_cmd dhcp; " \
113 		"else " \
114 			"setenv get_cmd tftp; " \
115 		"fi; " \
116 		"${get_cmd} ${image}; " \
117 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
118 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
119 				"bootz ${loadaddr} - ${fdt_addr}; " \
120 			"else " \
121 				"if test ${boot_fdt} = try; then " \
122 					"bootz; " \
123 				"else " \
124 					"echo WARN: Cannot load the DT; " \
125 				"fi; " \
126 			"fi; " \
127 		"else " \
128 			"bootz; " \
129 		"fi;\0" \
130 		"findfdt="\
131 			"if test $fdt_file = undefined; then " \
132 				"if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
133 					"setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
134 				"if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
135 					"setenv fdt_file imx6q-sabreauto.dtb; fi; " \
136 				"if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
137 					"setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
138 				"if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
139 					"setenv fdt_file imx6qp-sabresd.dtb; fi; " \
140 				"if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
141 					"setenv fdt_file imx6q-sabresd.dtb; fi; " \
142 				"if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
143 					"setenv fdt_file imx6dl-sabresd.dtb; fi; " \
144 				"if test $fdt_file = undefined; then " \
145 					"echo WARNING: Could not determine dtb to use; fi; " \
146 			"fi;\0" \
147 
148 #define CONFIG_BOOTCOMMAND \
149 	"run findfdt;" \
150 	"mmc dev ${mmcdev};" \
151 	"if mmc rescan; then " \
152 		"if run loadbootscript; then " \
153 		"run bootscript; " \
154 		"else " \
155 			"if run loadimage; then " \
156 				"run mmcboot; " \
157 			"else run netboot; " \
158 			"fi; " \
159 		"fi; " \
160 	"else run netboot; fi"
161 
162 #define CONFIG_ARP_TIMEOUT     200UL
163 
164 #define CONFIG_SYS_MEMTEST_START       0x10000000
165 #define CONFIG_SYS_MEMTEST_END         0x10010000
166 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
167 
168 /* Physical Memory Map */
169 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
170 
171 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
172 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
173 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
174 
175 #define CONFIG_SYS_INIT_SP_OFFSET \
176 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
177 #define CONFIG_SYS_INIT_SP_ADDR \
178 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
179 
180 /* Environment organization */
181 #define CONFIG_ENV_SIZE			(8 * 1024)
182 
183 #if defined(CONFIG_ENV_IS_IN_MMC)
184 #define CONFIG_ENV_OFFSET		(768 * 1024)
185 #endif
186 
187 /* Framebuffer */
188 #define CONFIG_VIDEO_IPUV3
189 #define CONFIG_VIDEO_BMP_RLE8
190 #define CONFIG_SPLASH_SCREEN
191 #define CONFIG_SPLASH_SCREEN_ALIGN
192 #define CONFIG_BMP_16BPP
193 #define CONFIG_VIDEO_LOGO
194 #define CONFIG_VIDEO_BMP_LOGO
195 #define CONFIG_IMX_HDMI
196 #define CONFIG_IMX_VIDEO_SKIP
197 
198 #define CONFIG_USBD_HS
199 
200 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */
201