1 /*
2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
10 #define __MX6QSABRE_COMMON_CONFIG_H
11 
12 #define CONFIG_MX6
13 
14 #include "mx6_common.h"
15 #include <asm/sizes.h>
16 
17 #define CONFIG_DISPLAY_CPUINFO
18 #define CONFIG_DISPLAY_BOARDINFO
19 
20 #include <asm/arch/imx-regs.h>
21 #include <asm/imx-common/gpio.h>
22 
23 #define CONFIG_CMDLINE_TAG
24 #define CONFIG_SETUP_MEMORY_TAGS
25 #define CONFIG_INITRD_TAG
26 #define CONFIG_REVISION_TAG
27 
28 /* Size of malloc() pool */
29 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
30 
31 #define CONFIG_BOARD_EARLY_INIT_F
32 #define CONFIG_BOARD_LATE_INIT
33 #define CONFIG_MXC_GPIO
34 
35 #define CONFIG_MXC_UART
36 
37 /* MMC Configs */
38 #define CONFIG_FSL_ESDHC
39 #define CONFIG_FSL_USDHC
40 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
41 
42 #define CONFIG_MMC
43 #define CONFIG_CMD_MMC
44 #define CONFIG_GENERIC_MMC
45 #define CONFIG_BOUNCE_BUFFER
46 #define CONFIG_CMD_EXT2
47 #define CONFIG_CMD_FAT
48 #define CONFIG_DOS_PARTITION
49 
50 #define CONFIG_CMD_PING
51 #define CONFIG_CMD_DHCP
52 #define CONFIG_CMD_MII
53 #define CONFIG_CMD_NET
54 #define CONFIG_FEC_MXC
55 #define CONFIG_MII
56 #define IMX_FEC_BASE			ENET_BASE_ADDR
57 #define CONFIG_FEC_XCV_TYPE		RGMII
58 #define CONFIG_ETHPRIME			"FEC"
59 #define CONFIG_FEC_MXC_PHYADDR		1
60 
61 #define CONFIG_PHYLIB
62 #define CONFIG_PHY_ATHEROS
63 
64 #define CONFIG_CMD_SF
65 #ifdef CONFIG_CMD_SF
66 #define CONFIG_SPI_FLASH
67 #define CONFIG_SPI_FLASH_STMICRO
68 #define CONFIG_MXC_SPI
69 #define CONFIG_SF_DEFAULT_BUS		0
70 #define CONFIG_SF_DEFAULT_CS		(0 | (IMX_GPIO_NR(4, 9) << 8))
71 #define CONFIG_SF_DEFAULT_SPEED		20000000
72 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
73 #endif
74 
75 /* allow to overwrite serial and ethaddr */
76 #define CONFIG_ENV_OVERWRITE
77 #define CONFIG_CONS_INDEX              1
78 #define CONFIG_BAUDRATE                        115200
79 
80 /* Command definition */
81 #include <config_cmd_default.h>
82 
83 #define CONFIG_CMD_BMODE
84 #define CONFIG_CMD_BOOTZ
85 #define CONFIG_CMD_SETEXPR
86 #undef CONFIG_CMD_IMLS
87 
88 #define CONFIG_BOOTDELAY               1
89 
90 #define CONFIG_LOADADDR                        0x12000000
91 #define CONFIG_SYS_TEXT_BASE           0x17800000
92 
93 #define CONFIG_EXTRA_ENV_SETTINGS \
94 	"script=boot.scr\0" \
95 	"uimage=uImage\0" \
96 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
97 	"fdt_addr=0x11000000\0" \
98 	"boot_fdt=try\0" \
99 	"ip_dyn=yes\0" \
100 	"console=" CONFIG_CONSOLE_DEV "\0" \
101 	"fdt_high=0xffffffff\0"	  \
102 	"initrd_high=0xffffffff\0" \
103 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
104 	"mmcpart=1\0" \
105 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
106 	"update_sd_firmware=" \
107 		"if test ${ip_dyn} = yes; then " \
108 			"setenv get_cmd dhcp; " \
109 		"else " \
110 			"setenv get_cmd tftp; " \
111 		"fi; " \
112 		"if mmc dev ${mmcdev}; then "	\
113 			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
114 				"setexpr fw_sz ${filesize} / 0x200; " \
115 				"setexpr fw_sz ${fw_sz} + 1; "	\
116 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
117 			"fi; "	\
118 		"fi\0" \
119 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
120 		"root=${mmcroot}\0" \
121 	"loadbootscript=" \
122 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
123 	"bootscript=echo Running bootscript from mmc ...; " \
124 		"source\0" \
125 	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
126 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
127 	"mmcboot=echo Booting from mmc ...; " \
128 		"run mmcargs; " \
129 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
130 			"if run loadfdt; then " \
131 				"bootm ${loadaddr} - ${fdt_addr}; " \
132 			"else " \
133 				"if test ${boot_fdt} = try; then " \
134 					"bootm; " \
135 				"else " \
136 					"echo WARN: Cannot load the DT; " \
137 				"fi; " \
138 			"fi; " \
139 		"else " \
140 			"bootm; " \
141 		"fi;\0" \
142 	"netargs=setenv bootargs console=${console},${baudrate} " \
143 		"root=/dev/nfs " \
144 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
145 	"netboot=echo Booting from net ...; " \
146 		"run netargs; " \
147 		"if test ${ip_dyn} = yes; then " \
148 			"setenv get_cmd dhcp; " \
149 		"else " \
150 			"setenv get_cmd tftp; " \
151 		"fi; " \
152 		"${get_cmd} ${uimage}; " \
153 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
154 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
155 				"bootm ${loadaddr} - ${fdt_addr}; " \
156 			"else " \
157 				"if test ${boot_fdt} = try; then " \
158 					"bootm; " \
159 				"else " \
160 					"echo WARN: Cannot load the DT; " \
161 				"fi; " \
162 			"fi; " \
163 		"else " \
164 			"bootm; " \
165 		"fi;\0"
166 
167 #define CONFIG_BOOTCOMMAND \
168 	"mmc dev ${mmcdev};" \
169 	"if mmc rescan; then " \
170 		"if run loadbootscript; then " \
171 		"run bootscript; " \
172 		"else " \
173 			"if run loaduimage; then " \
174 				"run mmcboot; " \
175 			"else run netboot; " \
176 			"fi; " \
177 		"fi; " \
178 	"else run netboot; fi"
179 
180 #define CONFIG_ARP_TIMEOUT     200UL
181 
182 /* Miscellaneous configurable options */
183 #define CONFIG_SYS_LONGHELP
184 #define CONFIG_SYS_HUSH_PARSER
185 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
186 #define CONFIG_AUTO_COMPLETE
187 #define CONFIG_SYS_CBSIZE              256
188 
189 /* Print Buffer Size */
190 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
191 #define CONFIG_SYS_MAXARGS             16
192 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
193 
194 #define CONFIG_SYS_MEMTEST_START       0x10000000
195 #define CONFIG_SYS_MEMTEST_END         0x10010000
196 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
197 
198 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
199 
200 #define CONFIG_CMDLINE_EDITING
201 #define CONFIG_STACKSIZE               (128 * 1024)
202 
203 /* Physical Memory Map */
204 #define CONFIG_NR_DRAM_BANKS           1
205 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
206 
207 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
208 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
209 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
210 
211 #define CONFIG_SYS_INIT_SP_OFFSET \
212 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
213 #define CONFIG_SYS_INIT_SP_ADDR \
214 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
215 
216 /* FLASH and environment organization */
217 #define CONFIG_SYS_NO_FLASH
218 
219 #define CONFIG_ENV_SIZE			(8 * 1024)
220 
221 #define CONFIG_ENV_IS_IN_MMC
222 
223 #if defined(CONFIG_ENV_IS_IN_MMC)
224 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
225 #endif
226 
227 #define CONFIG_OF_LIBFDT
228 
229 #ifndef CONFIG_SYS_DCACHE_OFF
230 #define CONFIG_CMD_CACHE
231 #endif
232 
233 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */
234