xref: /openbmc/u-boot/include/configs/mx6qarm2.h (revision 1c140fd2)
1 /*
2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Freescale i.MX6Q Armadillo2 board.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 #include "mx6_common.h"
13 
14 /* Size of malloc() pool */
15 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
16 
17 #define CONFIG_BOARD_EARLY_INIT_F
18 
19 #define CONFIG_MXC_UART
20 #define CONFIG_MXC_UART_BASE		UART4_BASE
21 
22 /* MMC Configs */
23 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC4_BASE_ADDR
24 #define CONFIG_SYS_FSL_USDHC_NUM	2
25 
26 #define	CONFIG_FEC_MXC
27 #define	CONFIG_MII
28 #define IMX_FEC_BASE			ENET_BASE_ADDR
29 #define	CONFIG_FEC_XCV_TYPE		RGMII
30 #define CONFIG_FEC_MXC_PHYADDR		0
31 
32 #define CONFIG_EXTRA_ENV_SETTINGS \
33 	"script=boot.scr\0" \
34 	"image=zImage\0" \
35 	"console=ttymxc3\0" \
36 	"fdt_file=imx6q-arm2.dtb\0" \
37 	"fdt_addr=0x18000000\0" \
38 	"fdt_high=0xffffffff\0" \
39 	"initrd_high=0xffffffff\0" \
40 	"boot_fdt=try\0" \
41 	"ip_dyn=yes\0" \
42 	"mmcdev=1\0" \
43 	"mmcpart=1\0" \
44 	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
45 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
46 		"root=${mmcroot}\0" \
47 	"loadbootscript=" \
48 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
49 	"bootscript=echo Running bootscript from mmc ...; " \
50 		"source\0" \
51 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
52 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
53 	"mmcboot=echo Booting from mmc ...; " \
54 		"run mmcargs; " \
55 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
56 			"if run loadfdt; then " \
57 				"bootz ${loadaddr} - ${fdt_addr}; " \
58 			"else " \
59 				"if test ${boot_fdt} = try; then " \
60 					"bootz; " \
61 				"else " \
62 					"echo WARN: Cannot load the DT; " \
63 				"fi; " \
64 			"fi; " \
65 		"else " \
66 			"bootz; " \
67 		"fi;\0" \
68 	"netargs=setenv bootargs console=${console},${baudrate} " \
69 		"root=/dev/nfs " \
70 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
71 	"netboot=echo Booting from net ...; " \
72 		"run netargs; " \
73 		"if test ${ip_dyn} = yes; then " \
74 			"setenv get_cmd dhcp; " \
75 		"else " \
76 			"setenv get_cmd tftp; " \
77 		"fi; " \
78 		"${get_cmd} ${image}; " \
79 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
80 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
81 				"bootz ${loadaddr} - ${fdt_addr}; " \
82 			"else " \
83 				"if test ${boot_fdt} = try; then " \
84 					"bootz; " \
85 				"else " \
86 					"echo WARN: Cannot load the DT; " \
87 				"fi; " \
88 			"fi; " \
89 		"else " \
90 			"bootz; " \
91 		"fi;\0"
92 
93 #define CONFIG_BOOTCOMMAND \
94 	"mmc dev ${mmcdev};" \
95 	"mmc dev ${mmcdev}; if mmc rescan; then " \
96 		"if run loadbootscript; then " \
97 			"run bootscript; " \
98 		"else " \
99 			"if run loadimage; then " \
100 				"run mmcboot; " \
101 			"else run netboot; " \
102 			"fi; " \
103 		"fi; " \
104 	"else run netboot; fi"
105 
106 #define CONFIG_ARP_TIMEOUT	200UL
107 
108 /* Miscellaneous configurable options */
109 #define CONFIG_SYS_MEMTEST_START	0x10000000
110 #define CONFIG_SYS_MEMTEST_END		0x10010000
111 
112 /* Physical Memory Map */
113 #define CONFIG_NR_DRAM_BANKS		1
114 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
115 
116 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
117 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
118 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
119 
120 #define CONFIG_SYS_INIT_SP_OFFSET \
121 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
122 #define CONFIG_SYS_INIT_SP_ADDR \
123 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
124 
125 /* Environment organization */
126 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
127 #define CONFIG_ENV_SIZE			(8 * 1024)
128 #define CONFIG_ENV_IS_IN_MMC
129 #define CONFIG_SYS_MMC_ENV_DEV		1
130 
131 /* USB Configs */
132 #ifdef CONFIG_CMD_USB
133 #define CONFIG_USB_EHCI
134 #define CONFIG_USB_EHCI_MX6
135 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
136 #define CONFIG_USB_HOST_ETHER
137 #define CONFIG_USB_ETHER_ASIX
138 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
139 #define CONFIG_MXC_USB_FLAGS		0
140 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
141 #endif
142 
143 #endif				/* __CONFIG_H */
144