1 /* 2 * Copyright (C) 2015 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the SolidRun mx6 based boards 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 #ifndef __MX6CUBOXI_CONFIG_H 9 #define __MX6CUBOXI_CONFIG_H 10 11 #include <config_distro_defaults.h> 12 #include "mx6_common.h" 13 14 #define CONFIG_SPL_LIBCOMMON_SUPPORT 15 #define CONFIG_SPL_MMC_SUPPORT 16 #include "imx6_spl.h" 17 18 #define CONFIG_IMX_THERMAL 19 20 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) 21 #define CONFIG_BOARD_EARLY_INIT_F 22 #define CONFIG_BOARD_LATE_INIT 23 #define CONFIG_MXC_UART 24 25 /* MMC Configs */ 26 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 27 28 /* Ethernet Configuration */ 29 #define CONFIG_FEC_MXC 30 #define CONFIG_MII 31 #define IMX_FEC_BASE ENET_BASE_ADDR 32 #define CONFIG_FEC_XCV_TYPE RGMII 33 #define CONFIG_FEC_MXC_PHYADDR 0 34 #define CONFIG_PHYLIB 35 #define CONFIG_PHY_ATHEROS 36 37 /* Framebuffer */ 38 #define CONFIG_VIDEO 39 #define CONFIG_VIDEO_IPUV3 40 #define CONFIG_IPUV3_CLK 260000000 41 #define CONFIG_CFB_CONSOLE 42 #define CONFIG_VGA_AS_SINGLE_DEVICE 43 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 44 #define CONFIG_VIDEO_BMP_RLE8 45 #define CONFIG_SPLASH_SCREEN 46 #define CONFIG_SPLASH_SCREEN_ALIGN 47 #define CONFIG_BMP_16BPP 48 #define CONFIG_VIDEO_LOGO 49 #define CONFIG_VIDEO_BMP_LOGO 50 #define CONFIG_IMX_HDMI 51 #define CONFIG_CMD_HDMIDETECT 52 #define CONFIG_IMX_VIDEO_SKIP 53 #define CONFIG_CONSOLE_MUX 54 55 /* USB */ 56 #define CONFIG_USB_EHCI 57 #define CONFIG_USB_EHCI_MX6 58 #define CONFIG_USB_STORAGE 59 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 60 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 61 #define CONFIG_MXC_USB_FLAGS 0 62 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 63 #define CONFIG_USB_KEYBOARD 64 #define CONFIG_SYS_USB_EVENT_POLL 65 #define CONFIG_PREBOOT \ 66 "if hdmidet; then " \ 67 "usb start; " \ 68 "setenv stdin serial,usbkbd; "\ 69 "setenv stdout serial,vga; " \ 70 "setenv stderr serial,vga; " \ 71 "else " \ 72 "setenv stdin serial; " \ 73 "setenv stdout serial; " \ 74 "setenv stderr serial; " \ 75 "fi;" 76 77 /* Command definition */ 78 79 #define CONFIG_MXC_UART_BASE UART1_BASE 80 #define CONFIG_CONSOLE_DEV "ttymxc0" 81 #define CONFIG_SYS_FSL_USDHC_NUM 1 82 #define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */ 83 84 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 85 #ifndef CONFIG_SPL_BUILD 86 #define CONFIG_EXTRA_ENV_SETTINGS \ 87 "fdtfile=undefined\0" \ 88 "fdt_addr_r=0x18000000\0" \ 89 "fdt_addr=0x18000000\0" \ 90 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 91 "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 92 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ 93 "ramdisk_addr_r=0x13000000\0" \ 94 "ramdiskaddr=0x13000000\0" \ 95 "initrd_high=0xffffffff\0" \ 96 "fdt_high=0xffffffff\0" \ 97 "ip_dyn=yes\0" \ 98 "console=" CONFIG_CONSOLE_DEV "\0" \ 99 "bootm_size=0x10000000\0" \ 100 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ 101 "update_sd_firmware=" \ 102 "if test ${ip_dyn} = yes; then " \ 103 "setenv get_cmd dhcp; " \ 104 "else " \ 105 "setenv get_cmd tftp; " \ 106 "fi; " \ 107 "if mmc dev ${mmcdev}; then " \ 108 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 109 "setexpr fw_sz ${filesize} / 0x200; " \ 110 "setexpr fw_sz ${fw_sz} + 1; " \ 111 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 112 "fi; " \ 113 "fi\0" \ 114 "findfdt="\ 115 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \ 116 "setenv fdtfile imx6q-hummingboard.dtb; fi; " \ 117 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \ 118 "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \ 119 "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \ 120 "setenv fdtfile imx6q-cubox-i.dtb; fi; " \ 121 "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \ 122 "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \ 123 "if test $fdtfile = undefined; then " \ 124 "echo WARNING: Could not determine dtb to use; fi; \0" \ 125 BOOTENV 126 127 #define CONFIG_BOOTCOMMAND \ 128 "run findfdt; " \ 129 "run distro_bootcmd" 130 131 #define BOOT_TARGET_DEVICES(func) \ 132 func(MMC, mmc, 0) \ 133 func(USB, usb, 0) \ 134 func(PXE, pxe, na) \ 135 func(DHCP, dhcp, na) 136 137 #include <config_distro_bootcmd.h> 138 139 #else 140 #define CONFIG_EXTRA_ENV_SETTINGS 141 #endif /* CONFIG_SPL_BUILD */ 142 143 /* Physical Memory Map */ 144 #define CONFIG_NR_DRAM_BANKS 1 145 #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR 146 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 147 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 148 149 #define CONFIG_SYS_INIT_SP_OFFSET \ 150 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 151 #define CONFIG_SYS_INIT_SP_ADDR \ 152 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 153 154 /* Environment organization */ 155 #define CONFIG_ENV_SIZE (8 * 1024) 156 #define CONFIG_ENV_IS_IN_MMC 157 #define CONFIG_ENV_OFFSET (8 * 64 * 1024) 158 159 #endif /* __MX6CUBOXI_CONFIG_H */ 160