xref: /openbmc/u-boot/include/configs/mx6cuboxi.h (revision 730d2544)
1 /*
2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the SolidRun mx6 based boards
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 #ifndef __MX6CUBOXI_CONFIG_H
9 #define __MX6CUBOXI_CONFIG_H
10 
11 #include <config_distro_defaults.h>
12 #include "mx6_common.h"
13 
14 #include "imx6_spl.h"
15 
16 #define CONFIG_IMX_THERMAL
17 
18 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
19 #define CONFIG_BOARD_EARLY_INIT_F
20 #define CONFIG_BOARD_LATE_INIT
21 #define CONFIG_MXC_UART
22 
23 /* MMC Configs */
24 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
25 
26 /* Ethernet Configuration */
27 #define CONFIG_FEC_MXC
28 #define CONFIG_MII
29 #define IMX_FEC_BASE			ENET_BASE_ADDR
30 #define CONFIG_FEC_XCV_TYPE		RGMII
31 #define CONFIG_FEC_MXC_PHYADDR		0
32 #define CONFIG_PHYLIB
33 #define CONFIG_PHY_ATHEROS
34 
35 /* Framebuffer */
36 #define CONFIG_VIDEO_IPUV3
37 #define CONFIG_IPUV3_CLK		260000000
38 #define CONFIG_VIDEO_BMP_RLE8
39 #define CONFIG_SPLASH_SCREEN
40 #define CONFIG_SPLASH_SCREEN_ALIGN
41 #define CONFIG_BMP_16BPP
42 #define CONFIG_VIDEO_LOGO
43 #define CONFIG_VIDEO_BMP_LOGO
44 #define CONFIG_IMX_HDMI
45 #define CONFIG_CMD_HDMIDETECT
46 #define CONFIG_IMX_VIDEO_SKIP
47 
48 /* USB */
49 #define CONFIG_USB_EHCI
50 #define CONFIG_USB_EHCI_MX6
51 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
52 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
53 #define CONFIG_MXC_USB_FLAGS		0
54 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
55 #define CONFIG_SYS_USB_EVENT_POLL
56 #define CONFIG_PREBOOT \
57 	"if hdmidet; then " \
58 		"usb start; "		       \
59 		"setenv stdin  serial,usbkbd; "\
60 		"setenv stdout serial,vga; "   \
61 		"setenv stderr serial,vga; "   \
62 	"else " \
63 		"setenv stdin  serial; " \
64 		"setenv stdout serial; " \
65 		"setenv stderr serial; " \
66 	"fi;"
67 
68 /* Command definition */
69 
70 #define CONFIG_MXC_UART_BASE	UART1_BASE
71 #define CONSOLE_DEV	"ttymxc0"
72 #define CONFIG_SYS_FSL_USDHC_NUM	1
73 #define CONFIG_SYS_MMC_ENV_DEV		0	/* SDHC2 */
74 
75 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
76 #ifndef CONFIG_SPL_BUILD
77 #define CONFIG_EXTRA_ENV_SETTINGS \
78 	"fdtfile=undefined\0" \
79 	"fdt_addr_r=0x18000000\0" \
80 	"fdt_addr=0x18000000\0" \
81 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"  \
82 	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
83 	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
84 	"ramdisk_addr_r=0x13000000\0" \
85 	"ramdiskaddr=0x13000000\0" \
86 	"initrd_high=0xffffffff\0" \
87 	"fdt_high=0xffffffff\0" \
88 	"ip_dyn=yes\0" \
89 	"console=" CONSOLE_DEV "\0" \
90 	"bootm_size=0x10000000\0" \
91 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
92 	"update_sd_firmware=" \
93 		"if test ${ip_dyn} = yes; then " \
94 			"setenv get_cmd dhcp; " \
95 		"else " \
96 			"setenv get_cmd tftp; " \
97 		"fi; " \
98 		"if mmc dev ${mmcdev}; then "	\
99 			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
100 				"setexpr fw_sz ${filesize} / 0x200; " \
101 				"setexpr fw_sz ${fw_sz} + 1; "	\
102 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
103 			"fi; "	\
104 		"fi\0" \
105 	"findfdt="\
106 		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
107 			"setenv fdtfile imx6q-hummingboard.dtb; fi; " \
108 		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
109 			"setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
110 		"if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
111 			"setenv fdtfile imx6q-cubox-i.dtb; fi; " \
112 		"if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
113 			"setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
114 		"if test $fdtfile = undefined; then " \
115 			"echo WARNING: Could not determine dtb to use; fi; \0" \
116 	BOOTENV
117 
118 #define CONFIG_BOOTCOMMAND \
119 	"run findfdt; " \
120 	"run distro_bootcmd"
121 
122 #define BOOT_TARGET_DEVICES(func) \
123 	func(MMC, mmc, 0) \
124 	func(USB, usb, 0) \
125 	func(PXE, pxe, na) \
126 	func(DHCP, dhcp, na)
127 
128 #include <config_distro_bootcmd.h>
129 
130 #else
131 #define CONFIG_EXTRA_ENV_SETTINGS
132 #endif /* CONFIG_SPL_BUILD */
133 
134 /* Physical Memory Map */
135 #define CONFIG_NR_DRAM_BANKS           1
136 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
137 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
138 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
139 
140 #define CONFIG_SYS_INIT_SP_OFFSET \
141 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
142 #define CONFIG_SYS_INIT_SP_ADDR \
143 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
144 
145 /* Environment organization */
146 #define CONFIG_ENV_SIZE			(8 * 1024)
147 #define CONFIG_ENV_IS_IN_MMC
148 #define CONFIG_ENV_OFFSET		(8 * 64 * 1024)
149 
150 #endif                         /* __MX6CUBOXI_CONFIG_H */
151