1 /* 2 * Copyright (C) 2015 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the SolidRun mx6 based boards 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 #ifndef __MX6CUBOXI_CONFIG_H 9 #define __MX6CUBOXI_CONFIG_H 10 11 #include <config_distro_defaults.h> 12 #include "mx6_common.h" 13 14 #include "imx6_spl.h" 15 16 #define CONFIG_IMX_THERMAL 17 18 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) 19 #define CONFIG_BOARD_EARLY_INIT_F 20 #define CONFIG_BOARD_LATE_INIT 21 #define CONFIG_MXC_UART 22 23 /* MMC Configs */ 24 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 25 26 /* Ethernet Configuration */ 27 #define CONFIG_FEC_MXC 28 #define CONFIG_MII 29 #define IMX_FEC_BASE ENET_BASE_ADDR 30 #define CONFIG_FEC_XCV_TYPE RGMII 31 #define CONFIG_FEC_MXC_PHYADDR 0 32 #define CONFIG_PHYLIB 33 #define CONFIG_PHY_ATHEROS 34 35 /* Framebuffer */ 36 #define CONFIG_VIDEO_IPUV3 37 #define CONFIG_IPUV3_CLK 260000000 38 #define CONFIG_VIDEO_BMP_RLE8 39 #define CONFIG_SPLASH_SCREEN 40 #define CONFIG_SPLASH_SCREEN_ALIGN 41 #define CONFIG_BMP_16BPP 42 #define CONFIG_VIDEO_LOGO 43 #define CONFIG_VIDEO_BMP_LOGO 44 #define CONFIG_IMX_HDMI 45 #define CONFIG_CMD_HDMIDETECT 46 #define CONFIG_IMX_VIDEO_SKIP 47 48 /* USB */ 49 #define CONFIG_USB_EHCI 50 #define CONFIG_USB_EHCI_MX6 51 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 52 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 53 #define CONFIG_MXC_USB_FLAGS 0 54 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 55 #define CONFIG_SYS_USB_EVENT_POLL 56 #define CONFIG_PREBOOT \ 57 "if hdmidet; then " \ 58 "usb start; " \ 59 "setenv stdin serial,usbkbd; "\ 60 "setenv stdout serial,vga; " \ 61 "setenv stderr serial,vga; " \ 62 "else " \ 63 "setenv stdin serial; " \ 64 "setenv stdout serial; " \ 65 "setenv stderr serial; " \ 66 "fi;" 67 68 /* Command definition */ 69 70 #define CONFIG_MXC_UART_BASE UART1_BASE 71 #define CONSOLE_DEV "ttymxc0" 72 #define CONFIG_SYS_FSL_USDHC_NUM 1 73 #define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */ 74 75 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 76 #ifndef CONFIG_SPL_BUILD 77 #define CONFIG_EXTRA_ENV_SETTINGS \ 78 "fdtfile=undefined\0" \ 79 "fdt_addr_r=0x18000000\0" \ 80 "fdt_addr=0x18000000\0" \ 81 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 82 "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 83 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ 84 "ramdisk_addr_r=0x13000000\0" \ 85 "ramdiskaddr=0x13000000\0" \ 86 "initrd_high=0xffffffff\0" \ 87 "fdt_high=0xffffffff\0" \ 88 "ip_dyn=yes\0" \ 89 "console=" CONSOLE_DEV "\0" \ 90 "bootm_size=0x10000000\0" \ 91 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ 92 "update_sd_firmware=" \ 93 "if test ${ip_dyn} = yes; then " \ 94 "setenv get_cmd dhcp; " \ 95 "else " \ 96 "setenv get_cmd tftp; " \ 97 "fi; " \ 98 "if mmc dev ${mmcdev}; then " \ 99 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 100 "setexpr fw_sz ${filesize} / 0x200; " \ 101 "setexpr fw_sz ${fw_sz} + 1; " \ 102 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 103 "fi; " \ 104 "fi\0" \ 105 "findfdt="\ 106 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \ 107 "setenv fdtfile imx6q-hummingboard.dtb; fi; " \ 108 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \ 109 "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \ 110 "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \ 111 "setenv fdtfile imx6q-cubox-i.dtb; fi; " \ 112 "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \ 113 "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \ 114 "if test $fdtfile = undefined; then " \ 115 "echo WARNING: Could not determine dtb to use; fi; \0" \ 116 BOOTENV 117 118 #define CONFIG_BOOTCOMMAND \ 119 "run findfdt; " \ 120 "run distro_bootcmd" 121 122 #define BOOT_TARGET_DEVICES(func) \ 123 func(MMC, mmc, 0) \ 124 func(USB, usb, 0) \ 125 func(PXE, pxe, na) \ 126 func(DHCP, dhcp, na) 127 128 #include <config_distro_bootcmd.h> 129 130 #else 131 #define CONFIG_EXTRA_ENV_SETTINGS 132 #endif /* CONFIG_SPL_BUILD */ 133 134 /* Physical Memory Map */ 135 #define CONFIG_NR_DRAM_BANKS 1 136 #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR 137 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 138 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 139 140 #define CONFIG_SYS_INIT_SP_OFFSET \ 141 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 142 #define CONFIG_SYS_INIT_SP_ADDR \ 143 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 144 145 /* Environment organization */ 146 #define CONFIG_ENV_SIZE (8 * 1024) 147 #define CONFIG_ENV_IS_IN_MMC 148 #define CONFIG_ENV_OFFSET (8 * 64 * 1024) 149 150 #endif /* __MX6CUBOXI_CONFIG_H */ 151