1 /* 2 * Copyright (C) 2015 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the SolidRun mx6 based boards 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 #ifndef __MX6CUBOXI_CONFIG_H 9 #define __MX6CUBOXI_CONFIG_H 10 11 #include <config_distro_defaults.h> 12 #include "mx6_common.h" 13 14 #define CONFIG_SPL_LIBCOMMON_SUPPORT 15 #define CONFIG_SPL_MMC_SUPPORT 16 #include "imx6_spl.h" 17 18 #define CONFIG_IMX_THERMAL 19 20 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) 21 #define CONFIG_BOARD_EARLY_INIT_F 22 #define CONFIG_BOARD_LATE_INIT 23 #define CONFIG_MXC_UART 24 25 /* MMC Configs */ 26 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 27 28 /* Ethernet Configuration */ 29 #define CONFIG_FEC_MXC 30 #define CONFIG_CMD_PING 31 #define CONFIG_CMD_DHCP 32 #define CONFIG_CMD_MII 33 #define CONFIG_MII 34 #define IMX_FEC_BASE ENET_BASE_ADDR 35 #define CONFIG_FEC_XCV_TYPE RGMII 36 #define CONFIG_FEC_MXC_PHYADDR 0 37 #define CONFIG_PHYLIB 38 #define CONFIG_PHY_ATHEROS 39 40 /* Framebuffer */ 41 #define CONFIG_VIDEO 42 #define CONFIG_VIDEO_IPUV3 43 #define CONFIG_IPUV3_CLK 260000000 44 #define CONFIG_CFB_CONSOLE 45 #define CONFIG_VGA_AS_SINGLE_DEVICE 46 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 47 #define CONFIG_VIDEO_BMP_RLE8 48 #define CONFIG_SPLASH_SCREEN 49 #define CONFIG_SPLASH_SCREEN_ALIGN 50 #define CONFIG_BMP_16BPP 51 #define CONFIG_VIDEO_LOGO 52 #define CONFIG_VIDEO_BMP_LOGO 53 #define CONFIG_IMX_HDMI 54 #define CONFIG_CMD_HDMIDETECT 55 #define CONFIG_IMX_VIDEO_SKIP 56 #define CONFIG_CONSOLE_MUX 57 58 /* USB */ 59 #define CONFIG_CMD_USB 60 #define CONFIG_USB_EHCI 61 #define CONFIG_USB_EHCI_MX6 62 #define CONFIG_USB_STORAGE 63 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 64 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 65 #define CONFIG_MXC_USB_FLAGS 0 66 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 67 #define CONFIG_USB_KEYBOARD 68 #define CONFIG_SYS_USB_EVENT_POLL 69 #define CONFIG_PREBOOT \ 70 "if hdmidet; then " \ 71 "usb start; " \ 72 "setenv stdin serial,usbkbd; "\ 73 "setenv stdout serial,vga; " \ 74 "setenv stderr serial,vga; " \ 75 "else " \ 76 "setenv stdin serial; " \ 77 "setenv stdout serial; " \ 78 "setenv stderr serial; " \ 79 "fi;" 80 81 /* Command definition */ 82 83 #define CONFIG_MXC_UART_BASE UART1_BASE 84 #define CONFIG_CONSOLE_DEV "ttymxc0" 85 #define CONFIG_SYS_FSL_USDHC_NUM 1 86 #define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */ 87 88 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 89 #ifndef CONFIG_SPL_BUILD 90 #define CONFIG_EXTRA_ENV_SETTINGS \ 91 "fdtfile=undefined\0" \ 92 "fdt_addr_r=0x18000000\0" \ 93 "fdt_addr=0x18000000\0" \ 94 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 95 "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 96 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ 97 "ramdisk_addr_r=0x13000000\0" \ 98 "ramdiskaddr=0x13000000\0" \ 99 "initrd_high=0xffffffff\0" \ 100 "fdt_high=0xffffffff\0" \ 101 "ip_dyn=yes\0" \ 102 "console=" CONFIG_CONSOLE_DEV "\0" \ 103 "bootm_size=0x10000000\0" \ 104 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ 105 "update_sd_firmware=" \ 106 "if test ${ip_dyn} = yes; then " \ 107 "setenv get_cmd dhcp; " \ 108 "else " \ 109 "setenv get_cmd tftp; " \ 110 "fi; " \ 111 "if mmc dev ${mmcdev}; then " \ 112 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 113 "setexpr fw_sz ${filesize} / 0x200; " \ 114 "setexpr fw_sz ${fw_sz} + 1; " \ 115 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 116 "fi; " \ 117 "fi\0" \ 118 "findfdt="\ 119 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \ 120 "setenv fdtfile imx6q-hummingboard.dtb; fi; " \ 121 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \ 122 "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \ 123 "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \ 124 "setenv fdtfile imx6q-cubox-i.dtb; fi; " \ 125 "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \ 126 "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \ 127 "if test $fdtfile = undefined; then " \ 128 "echo WARNING: Could not determine dtb to use; fi; \0" \ 129 BOOTENV 130 131 #define CONFIG_BOOTCOMMAND \ 132 "run findfdt; " \ 133 "run distro_bootcmd" 134 135 #define BOOT_TARGET_DEVICES(func) \ 136 func(MMC, mmc, 0) \ 137 func(USB, usb, 0) \ 138 func(PXE, pxe, na) \ 139 func(DHCP, dhcp, na) 140 141 #include <config_distro_bootcmd.h> 142 143 #else 144 #define CONFIG_EXTRA_ENV_SETTINGS 145 #endif /* CONFIG_SPL_BUILD */ 146 147 /* Physical Memory Map */ 148 #define CONFIG_NR_DRAM_BANKS 1 149 #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR 150 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 151 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 152 153 #define CONFIG_SYS_INIT_SP_OFFSET \ 154 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 155 #define CONFIG_SYS_INIT_SP_ADDR \ 156 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 157 158 /* Environment organization */ 159 #define CONFIG_ENV_SIZE (8 * 1024) 160 #define CONFIG_ENV_IS_IN_MMC 161 #define CONFIG_ENV_OFFSET (8 * 64 * 1024) 162 163 #endif /* __MX6CUBOXI_CONFIG_H */ 164