1 /* 2 * Copyright (C) 2011 Freescale Semiconductor, Inc. 3 * Jason Liu <r64343@freescale.com> 4 * 5 * Configuration settings for Freescale MX53 low cost board. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_MX53 14 15 #define CONFIG_DISPLAY_BOARDINFO 16 17 #define CONFIG_MACH_TYPE MACH_TYPE_MX53_LOCO 18 19 #include <asm/arch/imx-regs.h> 20 21 #define CONFIG_CMDLINE_TAG 22 #define CONFIG_SETUP_MEMORY_TAGS 23 #define CONFIG_INITRD_TAG 24 25 #define CONFIG_SYS_FSL_CLK 26 27 /* Size of malloc() pool */ 28 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 29 30 #define CONFIG_BOARD_EARLY_INIT_F 31 #define CONFIG_BOARD_LATE_INIT 32 #define CONFIG_MXC_GPIO 33 #define CONFIG_REVISION_TAG 34 35 #define CONFIG_MXC_UART 36 #define CONFIG_MXC_UART_BASE UART1_BASE 37 38 /* MMC Configs */ 39 #define CONFIG_FSL_ESDHC 40 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 41 #define CONFIG_SYS_FSL_ESDHC_NUM 2 42 43 #define CONFIG_MMC 44 #define CONFIG_GENERIC_MMC 45 #define CONFIG_DOS_PARTITION 46 47 /* Eth Configs */ 48 #define CONFIG_MII 49 50 #define CONFIG_FEC_MXC 51 #define IMX_FEC_BASE FEC_BASE_ADDR 52 #define CONFIG_FEC_MXC_PHYADDR 0x1F 53 54 /* USB Configs */ 55 #define CONFIG_USB_EHCI 56 #define CONFIG_USB_EHCI_MX5 57 #define CONFIG_USB_STORAGE 58 #define CONFIG_USB_HOST_ETHER 59 #define CONFIG_USB_ETHER_ASIX 60 #define CONFIG_USB_ETHER_MCS7830 61 #define CONFIG_USB_ETHER_SMSC95XX 62 #define CONFIG_MXC_USB_PORT 1 63 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 64 #define CONFIG_MXC_USB_FLAGS 0 65 66 /* I2C Configs */ 67 #define CONFIG_SYS_I2C 68 #define CONFIG_SYS_I2C_MXC 69 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 70 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 71 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 72 73 /* PMIC Controller */ 74 #define CONFIG_POWER 75 #define CONFIG_POWER_I2C 76 #define CONFIG_DIALOG_POWER 77 #define CONFIG_POWER_FSL 78 #define CONFIG_POWER_FSL_MC13892 79 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 80 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 81 82 /* allow to overwrite serial and ethaddr */ 83 #define CONFIG_ENV_OVERWRITE 84 #define CONFIG_CONS_INDEX 1 85 #define CONFIG_BAUDRATE 115200 86 87 /* Command definition */ 88 #define CONFIG_SUPPORT_RAW_INITRD 89 90 #define CONFIG_BOOTDELAY 1 91 92 #define CONFIG_ETHPRIME "FEC0" 93 94 #define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */ 95 #define CONFIG_SYS_TEXT_BASE 0x77800000 96 97 #define CONFIG_EXTRA_ENV_SETTINGS \ 98 "script=boot.scr\0" \ 99 "image=zImage\0" \ 100 "fdt_addr=0x71000000\0" \ 101 "boot_fdt=try\0" \ 102 "ip_dyn=yes\0" \ 103 "mmcdev=0\0" \ 104 "mmcpart=1\0" \ 105 "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ 106 "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \ 107 "loadbootscript=" \ 108 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 109 "bootscript=echo Running bootscript from mmc ...; " \ 110 "source\0" \ 111 "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 112 "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 113 "mmcboot=echo Booting from mmc ...; " \ 114 "run mmcargs; " \ 115 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 116 "if run loadfdt; then " \ 117 "bootz ${loadaddr} - ${fdt_addr}; " \ 118 "else " \ 119 "if test ${boot_fdt} = try; then " \ 120 "bootz; " \ 121 "else " \ 122 "echo WARN: Cannot load the DT; " \ 123 "fi; " \ 124 "fi; " \ 125 "else " \ 126 "bootz; " \ 127 "fi;\0" \ 128 "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ 129 "root=/dev/nfs " \ 130 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 131 "netboot=echo Booting from net ...; " \ 132 "run netargs; " \ 133 "if test ${ip_dyn} = yes; then " \ 134 "setenv get_cmd dhcp; " \ 135 "else " \ 136 "setenv get_cmd tftp; " \ 137 "fi; " \ 138 "${get_cmd} ${image}; " \ 139 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 140 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 141 "bootz ${loadaddr} - ${fdt_addr}; " \ 142 "else " \ 143 "if test ${boot_fdt} = try; then " \ 144 "bootz; " \ 145 "else " \ 146 "echo ERROR: Cannot load the DT; " \ 147 "exit; " \ 148 "fi; " \ 149 "fi; " \ 150 "else " \ 151 "bootz; " \ 152 "fi;\0" 153 154 #define CONFIG_BOOTCOMMAND \ 155 "mmc dev ${mmcdev}; if mmc rescan; then " \ 156 "if run loadbootscript; then " \ 157 "run bootscript; " \ 158 "else " \ 159 "if run loadimage; then " \ 160 "run mmcboot; " \ 161 "else run netboot; " \ 162 "fi; " \ 163 "fi; " \ 164 "else run netboot; fi" 165 166 #define CONFIG_ARP_TIMEOUT 200UL 167 168 /* Miscellaneous configurable options */ 169 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 170 #define CONFIG_AUTO_COMPLETE 171 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 172 173 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 174 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 175 176 #define CONFIG_SYS_MEMTEST_START 0x70000000 177 #define CONFIG_SYS_MEMTEST_END 0x70010000 178 179 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 180 181 #define CONFIG_CMDLINE_EDITING 182 183 /* Physical Memory Map */ 184 #define CONFIG_NR_DRAM_BANKS 2 185 #define PHYS_SDRAM_1 CSD0_BASE_ADDR 186 #define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size) 187 #define PHYS_SDRAM_2 CSD1_BASE_ADDR 188 #define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size) 189 #define PHYS_SDRAM_SIZE (gd->ram_size) 190 191 #define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) 192 #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) 193 #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) 194 195 #define CONFIG_SYS_INIT_SP_OFFSET \ 196 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 197 #define CONFIG_SYS_INIT_SP_ADDR \ 198 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 199 200 /* FLASH and environment organization */ 201 #define CONFIG_SYS_NO_FLASH 202 203 #define CONFIG_ENV_OFFSET (6 * 64 * 1024) 204 #define CONFIG_ENV_SIZE (8 * 1024) 205 #define CONFIG_ENV_IS_IN_MMC 206 #define CONFIG_SYS_MMC_ENV_DEV 0 207 208 #define CONFIG_CMD_SATA 209 #ifdef CONFIG_CMD_SATA 210 #define CONFIG_DWC_AHSATA 211 #define CONFIG_SYS_SATA_MAX_DEVICE 1 212 #define CONFIG_DWC_AHSATA_PORT_ID 0 213 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR 214 #define CONFIG_LBA48 215 #define CONFIG_LIBATA 216 #endif 217 218 /* Framebuffer and LCD */ 219 #define CONFIG_PREBOOT 220 #define CONFIG_VIDEO 221 #define CONFIG_VIDEO_IPUV3 222 #define CONFIG_CFB_CONSOLE 223 #define CONFIG_VGA_AS_SINGLE_DEVICE 224 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 225 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 226 #define CONFIG_VIDEO_BMP_RLE8 227 #define CONFIG_SPLASH_SCREEN 228 #define CONFIG_BMP_16BPP 229 #define CONFIG_VIDEO_LOGO 230 #define CONFIG_IPUV3_CLK 200000000 231 232 #endif /* __CONFIG_H */ 233