xref: /openbmc/u-boot/include/configs/mx51evk.h (revision fbe44dd1)
1 /*
2  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
3  *
4  * (C) Copyright 2009 Freescale Semiconductor, Inc.
5  *
6  * Configuration settings for the MX51EVK Board
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13 
14  /* High Level Configuration Options */
15 
16 #define CONFIG_SYS_FSL_CLK
17 #define CONFIG_SYS_TEXT_BASE	0x97800000
18 
19 #include <asm/arch/imx-regs.h>
20 
21 #define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
22 #define CONFIG_SETUP_MEMORY_TAGS
23 #define CONFIG_INITRD_TAG
24 #define CONFIG_REVISION_TAG
25 
26 #define CONFIG_MACH_TYPE	MACH_TYPE_MX51_BABBAGE
27 /*
28  * Size of malloc() pool
29  */
30 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
31 
32 /*
33  * Hardware drivers
34  */
35 #define CONFIG_FSL_IIM
36 #define CONFIG_CMD_FUSE
37 
38 #define CONFIG_MXC_UART
39 #define CONFIG_MXC_UART_BASE	UART1_BASE
40 #define CONFIG_MXC_GPIO
41 
42 /*
43  * SPI Configs
44  * */
45 
46 #define CONFIG_MXC_SPI
47 
48 /* PMIC Controller */
49 #define CONFIG_POWER
50 #define CONFIG_POWER_SPI
51 #define CONFIG_POWER_FSL
52 #define CONFIG_FSL_PMIC_BUS	0
53 #define CONFIG_FSL_PMIC_CS	0
54 #define CONFIG_FSL_PMIC_CLK	2500000
55 #define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
56 #define CONFIG_FSL_PMIC_BITLEN	32
57 #define CONFIG_RTC_MC13XXX
58 
59 /*
60  * MMC Configs
61  * */
62 #define CONFIG_FSL_ESDHC
63 #define CONFIG_SYS_FSL_ESDHC_ADDR	MMC_SDHC1_BASE_ADDR
64 #define CONFIG_SYS_FSL_ESDHC_NUM	2
65 
66 /*
67  * Eth Configs
68  */
69 #define CONFIG_MII
70 
71 #define CONFIG_FEC_MXC
72 #define IMX_FEC_BASE	FEC_BASE_ADDR
73 #define CONFIG_FEC_MXC_PHYADDR	0x1F
74 
75 /* USB Configs */
76 #define CONFIG_USB_EHCI
77 #define CONFIG_USB_EHCI_MX5
78 #define CONFIG_USB_HOST_ETHER
79 #define CONFIG_USB_ETHER_ASIX
80 #define CONFIG_USB_ETHER_SMSC95XX
81 #define CONFIG_MXC_USB_PORT	1
82 #define CONFIG_MXC_USB_PORTSC	PORT_PTS_ULPI
83 #define CONFIG_MXC_USB_FLAGS	MXC_EHCI_POWER_PINS_ENABLED
84 
85 /* Framebuffer and LCD */
86 #define CONFIG_PREBOOT
87 #define CONFIG_VIDEO_IPUV3
88 #define CONFIG_VIDEO_BMP_RLE8
89 #define CONFIG_SPLASH_SCREEN
90 #define CONFIG_BMP_16BPP
91 #define CONFIG_VIDEO_LOGO
92 #define CONFIG_IPUV3_CLK	133000000
93 
94 /* allow to overwrite serial and ethaddr */
95 #define CONFIG_ENV_OVERWRITE
96 #define CONFIG_CONS_INDEX		1
97 
98 #define CONFIG_ETHPRIME		"FEC0"
99 
100 #define CONFIG_LOADADDR		0x92000000	/* loadaddr env var */
101 
102 #define CONFIG_EXTRA_ENV_SETTINGS \
103 	"script=boot.scr\0" \
104 	"image=zImage\0" \
105 	"fdt_file=imx51-babbage.dtb\0" \
106 	"fdt_addr=0x91000000\0" \
107 	"boot_fdt=try\0" \
108 	"ip_dyn=yes\0" \
109 	"mmcdev=0\0" \
110 	"mmcpart=1\0" \
111 	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
112 	"mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
113 		"root=${mmcroot}\0" \
114 	"loadbootscript=" \
115 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
116 	"bootscript=echo Running bootscript from mmc ...; " \
117 		"source\0" \
118 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
119 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
120 	"mmcboot=echo Booting from mmc ...; " \
121 		"run mmcargs; " \
122 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
123 			"if run loadfdt; then " \
124 				"bootz ${loadaddr} - ${fdt_addr}; " \
125 			"else " \
126 				"if test ${boot_fdt} = try; then " \
127 					"bootz; " \
128 				"else " \
129 					"echo WARN: Cannot load the DT; " \
130 				"fi; " \
131 			"fi; " \
132 		"else " \
133 			"bootz; " \
134 		"fi;\0" \
135 	"netargs=setenv bootargs console=ttymxc0,${baudrate} " \
136 		"root=/dev/nfs " \
137 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
138 	"netboot=echo Booting from net ...; " \
139 		"run netargs; " \
140 		"if test ${ip_dyn} = yes; then " \
141 			"setenv get_cmd dhcp; " \
142 		"else " \
143 			"setenv get_cmd tftp; " \
144 		"fi; " \
145 		"${get_cmd} ${image}; " \
146 		"if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
147 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
148 				"bootz ${loadaddr} - ${fdt_addr}; " \
149 			"else " \
150 				"if test ${boot_fdt} = try; then " \
151 					"bootz; " \
152 				"else " \
153 					"echo ERROR: Cannot load the DT; " \
154 					"exit; " \
155 				"fi; " \
156 			"fi; " \
157 		"else " \
158 			"bootz; " \
159 		"fi;\0"
160 
161 #define CONFIG_BOOTCOMMAND \
162 	"mmc dev ${mmcdev}; if mmc rescan; then " \
163 		"if run loadbootscript; then " \
164 			"run bootscript; " \
165 		"else " \
166 			"if run loadimage; then " \
167 				"run mmcboot; " \
168 			"else run netboot; " \
169 			"fi; " \
170 		"fi; " \
171 	"else run netboot; fi"
172 
173 #define CONFIG_ARP_TIMEOUT	200UL
174 
175 /*
176  * Miscellaneous configurable options
177  */
178 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
179 #define CONFIG_AUTO_COMPLETE
180 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
181 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
182 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
183 
184 #define CONFIG_SYS_MEMTEST_START       0x90000000
185 #define CONFIG_SYS_MEMTEST_END         0x90010000
186 
187 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
188 
189 #define CONFIG_CMDLINE_EDITING
190 
191 /*-----------------------------------------------------------------------
192  * Physical Memory Map
193  */
194 #define CONFIG_NR_DRAM_BANKS	1
195 #define PHYS_SDRAM_1		CSD0_BASE_ADDR
196 #define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
197 
198 #define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
199 #define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
200 #define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)
201 
202 #define CONFIG_SYS_INIT_SP_OFFSET \
203 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
204 #define CONFIG_SYS_INIT_SP_ADDR \
205 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
206 
207 #define CONFIG_SYS_DDR_CLKSEL	0
208 #define CONFIG_SYS_CLKTL_CBCDR	0x59E35100
209 #define CONFIG_SYS_MAIN_PWR_ON
210 
211 /*-----------------------------------------------------------------------
212  * environment organization
213  */
214 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
215 #define CONFIG_ENV_SIZE        (8 * 1024)
216 #define CONFIG_ENV_IS_IN_MMC
217 #define CONFIG_SYS_MMC_ENV_DEV 0
218 
219 #endif
220