1 /* 2 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> 3 * 4 * (C) Copyright 2009 Freescale Semiconductor, Inc. 5 * 6 * Configuration settings for the MX51EVK Board 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 /* High Level Configuration Options */ 15 16 #define CONFIG_MX51 /* in a mx51 */ 17 18 #define CONFIG_DISPLAY_CPUINFO 19 #define CONFIG_DISPLAY_BOARDINFO 20 21 #define CONFIG_SYS_FSL_CLK 22 #define CONFIG_SYS_TEXT_BASE 0x97800000 23 24 #include <asm/arch/imx-regs.h> 25 26 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 27 #define CONFIG_SETUP_MEMORY_TAGS 28 #define CONFIG_INITRD_TAG 29 #define CONFIG_REVISION_TAG 30 31 #define CONFIG_MACH_TYPE MACH_TYPE_MX51_BABBAGE 32 /* 33 * Size of malloc() pool 34 */ 35 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 36 37 #define CONFIG_BOARD_LATE_INIT 38 39 /* 40 * Hardware drivers 41 */ 42 #define CONFIG_FSL_IIM 43 #define CONFIG_CMD_FUSE 44 45 #define CONFIG_MXC_UART 46 #define CONFIG_MXC_UART_BASE UART1_BASE 47 #define CONFIG_MXC_GPIO 48 49 /* 50 * SPI Configs 51 * */ 52 53 #define CONFIG_MXC_SPI 54 55 /* PMIC Controller */ 56 #define CONFIG_POWER 57 #define CONFIG_POWER_SPI 58 #define CONFIG_POWER_FSL 59 #define CONFIG_FSL_PMIC_BUS 0 60 #define CONFIG_FSL_PMIC_CS 0 61 #define CONFIG_FSL_PMIC_CLK 2500000 62 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) 63 #define CONFIG_FSL_PMIC_BITLEN 32 64 #define CONFIG_RTC_MC13XXX 65 66 /* 67 * MMC Configs 68 * */ 69 #define CONFIG_FSL_ESDHC 70 #define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR 71 #define CONFIG_SYS_FSL_ESDHC_NUM 2 72 73 #define CONFIG_MMC 74 75 #define CONFIG_GENERIC_MMC 76 #define CONFIG_DOS_PARTITION 77 78 /* 79 * Eth Configs 80 */ 81 #define CONFIG_MII 82 83 #define CONFIG_FEC_MXC 84 #define IMX_FEC_BASE FEC_BASE_ADDR 85 #define CONFIG_FEC_MXC_PHYADDR 0x1F 86 87 /* USB Configs */ 88 #define CONFIG_USB_EHCI 89 #define CONFIG_USB_EHCI_MX5 90 #define CONFIG_USB_STORAGE 91 #define CONFIG_USB_HOST_ETHER 92 #define CONFIG_USB_ETHER_ASIX 93 #define CONFIG_USB_ETHER_SMSC95XX 94 #define CONFIG_MXC_USB_PORT 1 95 #define CONFIG_MXC_USB_PORTSC PORT_PTS_ULPI 96 #define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED 97 98 /* Framebuffer and LCD */ 99 #define CONFIG_PREBOOT 100 #define CONFIG_VIDEO 101 #define CONFIG_VIDEO_IPUV3 102 #define CONFIG_CFB_CONSOLE 103 #define CONFIG_VGA_AS_SINGLE_DEVICE 104 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 105 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 106 #define CONFIG_VIDEO_BMP_RLE8 107 #define CONFIG_SPLASH_SCREEN 108 #define CONFIG_BMP_16BPP 109 #define CONFIG_VIDEO_LOGO 110 #define CONFIG_IPUV3_CLK 133000000 111 112 /* allow to overwrite serial and ethaddr */ 113 #define CONFIG_ENV_OVERWRITE 114 #define CONFIG_CONS_INDEX 1 115 #define CONFIG_BAUDRATE 115200 116 117 /*********************************************************** 118 * Command definition 119 ***********************************************************/ 120 121 #define CONFIG_CMD_DATE 122 123 #define CONFIG_BOOTDELAY 1 124 125 #define CONFIG_ETHPRIME "FEC0" 126 127 #define CONFIG_LOADADDR 0x92000000 /* loadaddr env var */ 128 129 #define CONFIG_EXTRA_ENV_SETTINGS \ 130 "script=boot.scr\0" \ 131 "image=zImage\0" \ 132 "fdt_file=imx51-babbage.dtb\0" \ 133 "fdt_addr=0x91000000\0" \ 134 "boot_fdt=try\0" \ 135 "ip_dyn=yes\0" \ 136 "mmcdev=0\0" \ 137 "mmcpart=1\0" \ 138 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ 139 "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ 140 "root=${mmcroot}\0" \ 141 "loadbootscript=" \ 142 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 143 "bootscript=echo Running bootscript from mmc ...; " \ 144 "source\0" \ 145 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 146 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 147 "mmcboot=echo Booting from mmc ...; " \ 148 "run mmcargs; " \ 149 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 150 "if run loadfdt; then " \ 151 "bootz ${loadaddr} - ${fdt_addr}; " \ 152 "else " \ 153 "if test ${boot_fdt} = try; then " \ 154 "bootz; " \ 155 "else " \ 156 "echo WARN: Cannot load the DT; " \ 157 "fi; " \ 158 "fi; " \ 159 "else " \ 160 "bootz; " \ 161 "fi;\0" \ 162 "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ 163 "root=/dev/nfs " \ 164 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 165 "netboot=echo Booting from net ...; " \ 166 "run netargs; " \ 167 "if test ${ip_dyn} = yes; then " \ 168 "setenv get_cmd dhcp; " \ 169 "else " \ 170 "setenv get_cmd tftp; " \ 171 "fi; " \ 172 "${get_cmd} ${image}; " \ 173 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 174 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 175 "bootz ${loadaddr} - ${fdt_addr}; " \ 176 "else " \ 177 "if test ${boot_fdt} = try; then " \ 178 "bootz; " \ 179 "else " \ 180 "echo ERROR: Cannot load the DT; " \ 181 "exit; " \ 182 "fi; " \ 183 "fi; " \ 184 "else " \ 185 "bootz; " \ 186 "fi;\0" 187 188 #define CONFIG_BOOTCOMMAND \ 189 "mmc dev ${mmcdev}; if mmc rescan; then " \ 190 "if run loadbootscript; then " \ 191 "run bootscript; " \ 192 "else " \ 193 "if run loadimage; then " \ 194 "run mmcboot; " \ 195 "else run netboot; " \ 196 "fi; " \ 197 "fi; " \ 198 "else run netboot; fi" 199 200 #define CONFIG_ARP_TIMEOUT 200UL 201 202 /* 203 * Miscellaneous configurable options 204 */ 205 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 206 #define CONFIG_AUTO_COMPLETE 207 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 208 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 209 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 210 211 #define CONFIG_SYS_MEMTEST_START 0x90000000 212 #define CONFIG_SYS_MEMTEST_END 0x90010000 213 214 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 215 216 #define CONFIG_CMDLINE_EDITING 217 218 /*----------------------------------------------------------------------- 219 * Physical Memory Map 220 */ 221 #define CONFIG_NR_DRAM_BANKS 1 222 #define PHYS_SDRAM_1 CSD0_BASE_ADDR 223 #define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) 224 225 #define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) 226 #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) 227 #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) 228 229 #define CONFIG_BOARD_EARLY_INIT_F 230 231 #define CONFIG_SYS_INIT_SP_OFFSET \ 232 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 233 #define CONFIG_SYS_INIT_SP_ADDR \ 234 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 235 236 #define CONFIG_SYS_DDR_CLKSEL 0 237 #define CONFIG_SYS_CLKTL_CBCDR 0x59E35100 238 #define CONFIG_SYS_MAIN_PWR_ON 239 240 /*----------------------------------------------------------------------- 241 * FLASH and environment organization 242 */ 243 #define CONFIG_SYS_NO_FLASH 244 245 #define CONFIG_ENV_OFFSET (6 * 64 * 1024) 246 #define CONFIG_ENV_SIZE (8 * 1024) 247 #define CONFIG_ENV_IS_IN_MMC 248 #define CONFIG_SYS_MMC_ENV_DEV 0 249 250 #endif 251