xref: /openbmc/u-boot/include/configs/mx51evk.h (revision e246b728)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
4  *
5  * (C) Copyright 2009 Freescale Semiconductor, Inc.
6  *
7  * Configuration settings for the MX51EVK Board
8  */
9 
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12 
13  /* High Level Configuration Options */
14 
15 #define CONFIG_SYS_FSL_CLK
16 
17 #include <asm/arch/imx-regs.h>
18 
19 #define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
20 #define CONFIG_SETUP_MEMORY_TAGS
21 #define CONFIG_INITRD_TAG
22 #define CONFIG_REVISION_TAG
23 
24 #define CONFIG_MACH_TYPE	MACH_TYPE_MX51_BABBAGE
25 /*
26  * Size of malloc() pool
27  */
28 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
29 
30 /*
31  * Hardware drivers
32  */
33 #define CONFIG_FSL_IIM
34 
35 #define CONFIG_MXC_UART
36 #define CONFIG_MXC_UART_BASE	UART1_BASE
37 
38 /* PMIC Controller */
39 #define CONFIG_POWER
40 #define CONFIG_POWER_SPI
41 #define CONFIG_POWER_FSL
42 #define CONFIG_FSL_PMIC_BUS	0
43 #define CONFIG_FSL_PMIC_CS	0
44 #define CONFIG_FSL_PMIC_CLK	2500000
45 #define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
46 #define CONFIG_FSL_PMIC_BITLEN	32
47 #define CONFIG_RTC_MC13XXX
48 
49 /*
50  * MMC Configs
51  * */
52 #define CONFIG_SYS_FSL_ESDHC_ADDR	MMC_SDHC1_BASE_ADDR
53 #define CONFIG_SYS_FSL_ESDHC_NUM	2
54 
55 /*
56  * Eth Configs
57  */
58 
59 #define CONFIG_FEC_MXC
60 #define IMX_FEC_BASE	FEC_BASE_ADDR
61 #define CONFIG_FEC_MXC_PHYADDR	0x1F
62 
63 /* USB Configs */
64 #define CONFIG_USB_EHCI_MX5
65 #define CONFIG_MXC_USB_PORT	1
66 #define CONFIG_MXC_USB_PORTSC	PORT_PTS_ULPI
67 #define CONFIG_MXC_USB_FLAGS	MXC_EHCI_POWER_PINS_ENABLED
68 
69 /* Framebuffer and LCD */
70 #define CONFIG_PREBOOT
71 #define CONFIG_VIDEO_IPUV3
72 #define CONFIG_VIDEO_BMP_RLE8
73 #define CONFIG_SPLASH_SCREEN
74 #define CONFIG_BMP_16BPP
75 #define CONFIG_VIDEO_LOGO
76 
77 /* allow to overwrite serial and ethaddr */
78 #define CONFIG_ENV_OVERWRITE
79 
80 #define CONFIG_ETHPRIME		"FEC0"
81 
82 #define CONFIG_LOADADDR		0x92000000	/* loadaddr env var */
83 
84 #define CONFIG_EXTRA_ENV_SETTINGS \
85 	"script=boot.scr\0" \
86 	"image=zImage\0" \
87 	"fdt_file=imx51-babbage.dtb\0" \
88 	"fdt_addr=0x91000000\0" \
89 	"boot_fdt=try\0" \
90 	"ip_dyn=yes\0" \
91 	"mmcdev=0\0" \
92 	"mmcpart=1\0" \
93 	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
94 	"mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
95 		"root=${mmcroot}\0" \
96 	"loadbootscript=" \
97 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
98 	"bootscript=echo Running bootscript from mmc ...; " \
99 		"source\0" \
100 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
101 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
102 	"mmcboot=echo Booting from mmc ...; " \
103 		"run mmcargs; " \
104 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
105 			"if run loadfdt; then " \
106 				"bootz ${loadaddr} - ${fdt_addr}; " \
107 			"else " \
108 				"if test ${boot_fdt} = try; then " \
109 					"bootz; " \
110 				"else " \
111 					"echo WARN: Cannot load the DT; " \
112 				"fi; " \
113 			"fi; " \
114 		"else " \
115 			"bootz; " \
116 		"fi;\0" \
117 	"netargs=setenv bootargs console=ttymxc0,${baudrate} " \
118 		"root=/dev/nfs " \
119 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
120 	"netboot=echo Booting from net ...; " \
121 		"run netargs; " \
122 		"if test ${ip_dyn} = yes; then " \
123 			"setenv get_cmd dhcp; " \
124 		"else " \
125 			"setenv get_cmd tftp; " \
126 		"fi; " \
127 		"${get_cmd} ${image}; " \
128 		"if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
129 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
130 				"bootz ${loadaddr} - ${fdt_addr}; " \
131 			"else " \
132 				"if test ${boot_fdt} = try; then " \
133 					"bootz; " \
134 				"else " \
135 					"echo ERROR: Cannot load the DT; " \
136 					"exit; " \
137 				"fi; " \
138 			"fi; " \
139 		"else " \
140 			"bootz; " \
141 		"fi;\0"
142 
143 #define CONFIG_BOOTCOMMAND \
144 	"mmc dev ${mmcdev}; if mmc rescan; then " \
145 		"if run loadbootscript; then " \
146 			"run bootscript; " \
147 		"else " \
148 			"if run loadimage; then " \
149 				"run mmcboot; " \
150 			"else run netboot; " \
151 			"fi; " \
152 		"fi; " \
153 	"else run netboot; fi"
154 
155 #define CONFIG_ARP_TIMEOUT	200UL
156 
157 /*
158  * Miscellaneous configurable options
159  */
160 
161 #define CONFIG_SYS_MEMTEST_START       0x90000000
162 #define CONFIG_SYS_MEMTEST_END         0x90010000
163 
164 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
165 
166 /*-----------------------------------------------------------------------
167  * Physical Memory Map
168  */
169 #define PHYS_SDRAM_1		CSD0_BASE_ADDR
170 #define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
171 
172 #define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
173 #define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
174 #define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)
175 
176 #define CONFIG_SYS_INIT_SP_OFFSET \
177 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
178 #define CONFIG_SYS_INIT_SP_ADDR \
179 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
180 
181 #define CONFIG_SYS_DDR_CLKSEL	0
182 #define CONFIG_SYS_CLKTL_CBCDR	0x59E35100
183 #define CONFIG_SYS_MAIN_PWR_ON
184 
185 /*-----------------------------------------------------------------------
186  * environment organization
187  */
188 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
189 #define CONFIG_ENV_SIZE        (8 * 1024)
190 #define CONFIG_SYS_MMC_ENV_DEV 0
191 
192 #endif
193