1 /* 2 * (C) Copyright 2010, Stefano Babic <sbabic@denx.de> 3 * 4 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. 5 * 6 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> 7 * 8 * Configuration for the MX35pdk Freescale board. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 #include <asm/arch/imx-regs.h> 17 18 /* High Level Configuration Options */ 19 #define CONFIG_MX35 20 21 #define CONFIG_SYS_FSL_CLK 22 23 /* Set TEXT at the beginning of the NOR flash */ 24 #define CONFIG_SYS_TEXT_BASE 0xA0000000 25 26 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 27 #define CONFIG_REVISION_TAG 28 #define CONFIG_SETUP_MEMORY_TAGS 29 #define CONFIG_INITRD_TAG 30 31 /* 32 * Size of malloc() pool 33 */ 34 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) 35 36 /* 37 * Hardware drivers 38 */ 39 #define CONFIG_SYS_I2C 40 #define CONFIG_SYS_I2C_MXC 41 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 42 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 43 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 44 #define CONFIG_MXC_SPI 45 #define CONFIG_MXC_GPIO 46 47 /* 48 * PMIC Configs 49 */ 50 #define CONFIG_POWER 51 #define CONFIG_POWER_I2C 52 #define CONFIG_POWER_FSL 53 #define CONFIG_POWER_FSL_MC13892 54 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 55 #define CONFIG_RTC_MC13XXX 56 57 /* 58 * MFD MC9SDZ60 59 */ 60 #define CONFIG_FSL_MC9SDZ60 61 #define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR 0x69 62 63 /* 64 * UART (console) 65 */ 66 #define CONFIG_MXC_UART 67 #define CONFIG_MXC_UART_BASE UART1_BASE 68 69 /* allow to overwrite serial and ethaddr */ 70 #define CONFIG_ENV_OVERWRITE 71 #define CONFIG_CONS_INDEX 1 72 #define CONFIG_BAUDRATE 115200 73 74 /* 75 * Command definition 76 */ 77 #define CONFIG_BOOTP_SUBNETMASK 78 #define CONFIG_BOOTP_GATEWAY 79 #define CONFIG_BOOTP_DNS 80 81 #define CONFIG_CMD_NAND 82 83 #define CONFIG_NET_RETRY_COUNT 100 84 #define CONFIG_CMD_DATE 85 86 87 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ 88 89 /* 90 * Ethernet on the debug board (SMC911) 91 */ 92 #define CONFIG_SMC911X 93 #define CONFIG_SMC911X_16_BIT 1 94 #define CONFIG_SMC911X_BASE CS5_BASE_ADDR 95 96 #define CONFIG_HAS_ETH1 97 #define CONFIG_ETHPRIME 98 99 /* 100 * Ethernet on SOC (FEC) 101 */ 102 #define CONFIG_FEC_MXC 103 #define IMX_FEC_BASE FEC_BASE_ADDR 104 #define CONFIG_FEC_MXC_PHYADDR 0x1F 105 106 #define CONFIG_MII 107 108 #define CONFIG_ARP_TIMEOUT 200UL 109 110 /* 111 * Miscellaneous configurable options 112 */ 113 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 114 #define CONFIG_CMDLINE_EDITING 115 116 #define CONFIG_AUTO_COMPLETE 117 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 118 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 119 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 120 121 #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ 122 #define CONFIG_SYS_MEMTEST_END 0x10000 123 124 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 125 126 /* 127 * Physical Memory Map 128 */ 129 #define CONFIG_NR_DRAM_BANKS 2 130 #define PHYS_SDRAM_1 CSD0_BASE_ADDR 131 #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) 132 #define PHYS_SDRAM_2 CSD1_BASE_ADDR 133 #define PHYS_SDRAM_2_SIZE (128 * 1024 * 1024) 134 135 #define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR 136 #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) 137 #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) 138 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 139 GENERATED_GBL_DATA_SIZE) 140 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 141 CONFIG_SYS_GBL_DATA_OFFSET) 142 143 /* 144 * MTD Command for mtdparts 145 */ 146 #define CONFIG_CMD_MTDPARTS 147 #define CONFIG_MTD_DEVICE 148 #define CONFIG_FLASH_CFI_MTD 149 #define CONFIG_MTD_PARTITIONS 150 #define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" 151 #define MTDPARTS_DEFAULT "mtdparts=mxc_nand:1m(boot),5m(linux)," \ 152 "96m(root),8m(cfg),1938m(user);" \ 153 "physmap-flash.0:512k(b),4m(k),30m(u),28m(r)" 154 155 /* 156 * FLASH and environment organization 157 */ 158 #define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR 159 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 160 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ 161 /* Monitor at beginning of flash */ 162 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 163 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 164 165 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 166 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 167 168 /* Address and size of Redundant Environment Sector */ 169 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 170 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 171 172 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ 173 CONFIG_SYS_MONITOR_LEN) 174 175 #define CONFIG_ENV_IS_IN_FLASH 176 177 #if defined(CONFIG_FSL_ENV_IN_NAND) 178 #define CONFIG_ENV_IS_IN_NAND 179 #define CONFIG_ENV_OFFSET (1024 * 1024) 180 #endif 181 182 /* 183 * CFI FLASH driver setup 184 */ 185 #define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ 186 #define CONFIG_FLASH_CFI_DRIVER 187 188 /* A non-standard buffered write algorithm */ 189 #define CONFIG_FLASH_SPANSION_S29WS_N 190 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */ 191 #define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ 192 193 /* 194 * NAND FLASH driver setup 195 */ 196 #define CONFIG_NAND_MXC 197 #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) 198 #define CONFIG_SYS_MAX_NAND_DEVICE 1 199 #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) 200 #define CONFIG_MXC_NAND_HWECC 201 #define CONFIG_SYS_NAND_LARGEPAGE 202 203 /* EHCI driver */ 204 #define CONFIG_USB_EHCI 205 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 206 #define CONFIG_EHCI_IS_TDI 207 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 208 #define CONFIG_USB_EHCI_MXC 209 #define CONFIG_MXC_USB_PORT 0 210 #define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERFACE_DIFF_UNI | \ 211 MXC_EHCI_POWER_PINS_ENABLED | \ 212 MXC_EHCI_OC_PIN_ACTIVE_LOW) 213 #define CONFIG_MXC_USB_PORTSC (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI) 214 215 /* mmc driver */ 216 #define CONFIG_GENERIC_MMC 217 #define CONFIG_FSL_ESDHC 218 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 219 #define CONFIG_SYS_FSL_ESDHC_NUM 1 220 221 /* 222 * Default environment and default scripts 223 * to update uboot and load kernel 224 */ 225 226 #define CONFIG_HOSTNAME "mx35pdk" 227 #define CONFIG_EXTRA_ENV_SETTINGS \ 228 "netdev=eth1\0" \ 229 "ethprime=smc911x\0" \ 230 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 231 "nfsroot=${serverip}:${rootpath}\0" \ 232 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 233 "addip_sta=setenv bootargs ${bootargs} " \ 234 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 235 ":${hostname}:${netdev}:off panic=1\0" \ 236 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 237 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 238 "else run addip_sta;fi\0" \ 239 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 240 "addtty=setenv bootargs ${bootargs}" \ 241 " console=ttymxc0,${baudrate}\0" \ 242 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 243 "loadaddr=80800000\0" \ 244 "kernel_addr_r=80800000\0" \ 245 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ 246 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ 247 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \ 248 "flash_self=run ramargs addip addtty addmtd addmisc;" \ 249 "bootm ${kernel_addr} ${ramdisk_addr}\0" \ 250 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ 251 "bootm ${kernel_addr}\0" \ 252 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ 253 "run nfsargs addip addtty addmtd addmisc;" \ 254 "bootm ${kernel_addr_r}\0" \ 255 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ 256 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ 257 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ 258 "load=tftp ${loadaddr} ${u-boot}\0" \ 259 "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ 260 "update=protect off ${uboot_addr} +80000;" \ 261 "erase ${uboot_addr} +80000;" \ 262 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ 263 "upd=if run load;then echo Updating u-boot;if run update;" \ 264 "then echo U-Boot updated;" \ 265 "else echo Error updating u-boot !;" \ 266 "echo Board without bootloader !!;" \ 267 "fi;" \ 268 "else echo U-Boot not downloaded..exiting;fi\0" \ 269 "bootcmd=run net_nfs\0" 270 271 #endif /* __CONFIG_H */ 272