1 /* 2 * (C) Copyright 2010, Stefano Babic <sbabic@denx.de> 3 * 4 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. 5 * 6 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> 7 * 8 * Configuration for the MX35pdk Freescale board. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 #include <asm/arch/imx-regs.h> 17 18 /* High Level Configuration Options */ 19 #define CONFIG_MX35 20 21 #define CONFIG_DISPLAY_CPUINFO 22 #define CONFIG_SYS_FSL_CLK 23 24 /* Set TEXT at the beginning of the NOR flash */ 25 #define CONFIG_SYS_TEXT_BASE 0xA0000000 26 27 #define CONFIG_BOARD_EARLY_INIT_F 28 #define CONFIG_BOARD_LATE_INIT 29 30 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 31 #define CONFIG_REVISION_TAG 32 #define CONFIG_SETUP_MEMORY_TAGS 33 #define CONFIG_INITRD_TAG 34 35 /* 36 * Size of malloc() pool 37 */ 38 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) 39 40 /* 41 * Hardware drivers 42 */ 43 #define CONFIG_SYS_I2C 44 #define CONFIG_SYS_I2C_MXC 45 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 46 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 47 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 48 #define CONFIG_MXC_SPI 49 #define CONFIG_MXC_GPIO 50 51 52 /* 53 * PMIC Configs 54 */ 55 #define CONFIG_POWER 56 #define CONFIG_POWER_I2C 57 #define CONFIG_POWER_FSL 58 #define CONFIG_POWER_FSL_MC13892 59 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 60 #define CONFIG_RTC_MC13XXX 61 62 /* 63 * MFD MC9SDZ60 64 */ 65 #define CONFIG_FSL_MC9SDZ60 66 #define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR 0x69 67 68 /* 69 * UART (console) 70 */ 71 #define CONFIG_MXC_UART 72 #define CONFIG_MXC_UART_BASE UART1_BASE 73 74 /* allow to overwrite serial and ethaddr */ 75 #define CONFIG_ENV_OVERWRITE 76 #define CONFIG_CONS_INDEX 1 77 #define CONFIG_BAUDRATE 115200 78 79 /* 80 * Command definition 81 */ 82 #define CONFIG_CMD_BOOTZ 83 #define CONFIG_CMD_PING 84 #define CONFIG_CMD_DHCP 85 #define CONFIG_BOOTP_SUBNETMASK 86 #define CONFIG_BOOTP_GATEWAY 87 #define CONFIG_BOOTP_DNS 88 89 #define CONFIG_CMD_NAND 90 #define CONFIG_CMD_CACHE 91 92 #define CONFIG_CMD_I2C 93 #define CONFIG_CMD_SPI 94 #define CONFIG_CMD_MII 95 #define CONFIG_NET_RETRY_COUNT 100 96 #define CONFIG_CMD_DATE 97 98 #define CONFIG_CMD_USB 99 #define CONFIG_USB_STORAGE 100 #define CONFIG_CMD_MMC 101 #define CONFIG_DOS_PARTITION 102 #define CONFIG_EFI_PARTITION 103 #define CONFIG_CMD_EXT2 104 #define CONFIG_CMD_FAT 105 106 #define CONFIG_BOOTDELAY 1 107 108 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ 109 110 /* 111 * Ethernet on the debug board (SMC911) 112 */ 113 #define CONFIG_SMC911X 114 #define CONFIG_SMC911X_16_BIT 1 115 #define CONFIG_SMC911X_BASE CS5_BASE_ADDR 116 117 #define CONFIG_HAS_ETH1 118 #define CONFIG_ETHPRIME 119 120 /* 121 * Ethernet on SOC (FEC) 122 */ 123 #define CONFIG_FEC_MXC 124 #define IMX_FEC_BASE FEC_BASE_ADDR 125 #define CONFIG_FEC_MXC_PHYADDR 0x1F 126 127 #define CONFIG_MII 128 129 #define CONFIG_ARP_TIMEOUT 200UL 130 131 /* 132 * Miscellaneous configurable options 133 */ 134 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 135 #define CONFIG_CMDLINE_EDITING 136 #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ 137 138 #define CONFIG_AUTO_COMPLETE 139 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 140 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 141 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 142 143 #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ 144 #define CONFIG_SYS_MEMTEST_END 0x10000 145 146 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 147 148 /* 149 * Physical Memory Map 150 */ 151 #define CONFIG_NR_DRAM_BANKS 2 152 #define PHYS_SDRAM_1 CSD0_BASE_ADDR 153 #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) 154 #define PHYS_SDRAM_2 CSD1_BASE_ADDR 155 #define PHYS_SDRAM_2_SIZE (128 * 1024 * 1024) 156 157 #define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR 158 #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) 159 #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) 160 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 161 GENERATED_GBL_DATA_SIZE) 162 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 163 CONFIG_SYS_GBL_DATA_OFFSET) 164 165 /* 166 * MTD Command for mtdparts 167 */ 168 #define CONFIG_CMD_MTDPARTS 169 #define CONFIG_MTD_DEVICE 170 #define CONFIG_FLASH_CFI_MTD 171 #define CONFIG_MTD_PARTITIONS 172 #define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" 173 #define MTDPARTS_DEFAULT "mtdparts=mxc_nand:1m(boot),5m(linux)," \ 174 "96m(root),8m(cfg),1938m(user);" \ 175 "physmap-flash.0:512k(b),4m(k),30m(u),28m(r)" 176 177 /* 178 * FLASH and environment organization 179 */ 180 #define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR 181 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 182 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ 183 /* Monitor at beginning of flash */ 184 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 185 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 186 187 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 188 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 189 190 /* Address and size of Redundant Environment Sector */ 191 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 192 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 193 194 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ 195 CONFIG_SYS_MONITOR_LEN) 196 197 #define CONFIG_ENV_IS_IN_FLASH 198 199 #if defined(CONFIG_FSL_ENV_IN_NAND) 200 #define CONFIG_ENV_IS_IN_NAND 201 #define CONFIG_ENV_OFFSET (1024 * 1024) 202 #endif 203 204 /* 205 * CFI FLASH driver setup 206 */ 207 #define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ 208 #define CONFIG_FLASH_CFI_DRIVER 209 210 /* A non-standard buffered write algorithm */ 211 #define CONFIG_FLASH_SPANSION_S29WS_N 212 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */ 213 #define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ 214 215 /* 216 * NAND FLASH driver setup 217 */ 218 #define CONFIG_NAND_MXC 219 #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) 220 #define CONFIG_SYS_MAX_NAND_DEVICE 1 221 #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) 222 #define CONFIG_MXC_NAND_HWECC 223 #define CONFIG_SYS_NAND_LARGEPAGE 224 225 /* EHCI driver */ 226 #define CONFIG_USB_EHCI 227 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 228 #define CONFIG_EHCI_IS_TDI 229 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 230 #define CONFIG_USB_EHCI_MXC 231 #define CONFIG_MXC_USB_PORT 0 232 #define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERFACE_DIFF_UNI | \ 233 MXC_EHCI_POWER_PINS_ENABLED | \ 234 MXC_EHCI_OC_PIN_ACTIVE_LOW) 235 #define CONFIG_MXC_USB_PORTSC (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI) 236 237 /* mmc driver */ 238 #define CONFIG_MMC 239 #define CONFIG_GENERIC_MMC 240 #define CONFIG_FSL_ESDHC 241 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 242 #define CONFIG_SYS_FSL_ESDHC_NUM 1 243 244 /* 245 * Default environment and default scripts 246 * to update uboot and load kernel 247 */ 248 249 #define CONFIG_HOSTNAME "mx35pdk" 250 #define CONFIG_EXTRA_ENV_SETTINGS \ 251 "netdev=eth1\0" \ 252 "ethprime=smc911x\0" \ 253 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 254 "nfsroot=${serverip}:${rootpath}\0" \ 255 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 256 "addip_sta=setenv bootargs ${bootargs} " \ 257 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 258 ":${hostname}:${netdev}:off panic=1\0" \ 259 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 260 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 261 "else run addip_sta;fi\0" \ 262 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 263 "addtty=setenv bootargs ${bootargs}" \ 264 " console=ttymxc0,${baudrate}\0" \ 265 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 266 "loadaddr=80800000\0" \ 267 "kernel_addr_r=80800000\0" \ 268 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ 269 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ 270 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \ 271 "flash_self=run ramargs addip addtty addmtd addmisc;" \ 272 "bootm ${kernel_addr} ${ramdisk_addr}\0" \ 273 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ 274 "bootm ${kernel_addr}\0" \ 275 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ 276 "run nfsargs addip addtty addmtd addmisc;" \ 277 "bootm ${kernel_addr_r}\0" \ 278 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ 279 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ 280 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ 281 "load=tftp ${loadaddr} ${u-boot}\0" \ 282 "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ 283 "update=protect off ${uboot_addr} +80000;" \ 284 "erase ${uboot_addr} +80000;" \ 285 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ 286 "upd=if run load;then echo Updating u-boot;if run update;" \ 287 "then echo U-Boot updated;" \ 288 "else echo Error updating u-boot !;" \ 289 "echo Board without bootloader !!;" \ 290 "fi;" \ 291 "else echo U-Boot not downloaded..exiting;fi\0" \ 292 "bootcmd=run net_nfs\0" 293 294 #endif /* __CONFIG_H */ 295