1 /* 2 * (C) Copyright 2011 Freescale Semiconductor, Inc. 3 * Author: Fabio Estevam <fabio.estevam@freescale.com> 4 * 5 * Based on m28evk.h: 6 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> 7 * on behalf of DENX Software Engineering GmbH 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 */ 19 #ifndef __MX28EVK_CONFIG_H__ 20 #define __MX28EVK_CONFIG_H__ 21 22 #include <asm/arch/regs-base.h> 23 24 /* 25 * SoC configurations 26 */ 27 #define CONFIG_MX28 /* i.MX28 SoC */ 28 #define CONFIG_MXS_GPIO /* GPIO control */ 29 #define CONFIG_SYS_HZ 1000 /* Ticks per second */ 30 31 #define CONFIG_MACH_TYPE MACH_TYPE_MX28EVK 32 33 #define CONFIG_SYS_NO_FLASH 34 #define CONFIG_SYS_ICACHE_OFF 35 #define CONFIG_SYS_DCACHE_OFF 36 #define CONFIG_BOARD_EARLY_INIT_F 37 #define CONFIG_ARCH_MISC_INIT 38 39 /* 40 * SPL 41 */ 42 #define CONFIG_SPL 43 #define CONFIG_SPL_NO_CPU_SUPPORT_CODE 44 #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mx28" 45 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds" 46 #define CONFIG_SPL_LIBCOMMON_SUPPORT 47 #define CONFIG_SPL_LIBGENERIC_SUPPORT 48 #define CONFIG_SPL_GPIO_SUPPORT 49 50 /* 51 * U-Boot Commands 52 */ 53 #include <config_cmd_default.h> 54 #define CONFIG_DISPLAY_CPUINFO 55 #define CONFIG_DOS_PARTITION 56 57 #define CONFIG_CMD_CACHE 58 #define CONFIG_CMD_DATE 59 #define CONFIG_CMD_DHCP 60 #define CONFIG_CMD_FAT 61 #define CONFIG_CMD_GPIO 62 #define CONFIG_CMD_MII 63 #define CONFIG_CMD_MMC 64 #define CONFIG_CMD_NET 65 #define CONFIG_CMD_NFS 66 #define CONFIG_CMD_PING 67 #define CONFIG_CMD_SF 68 #define CONFIG_CMD_SPI 69 #define CONFIG_CMD_USB 70 #define CONFIG_CMD_BOOTZ 71 #define CONFIG_CMD_I2C 72 73 /* 74 * Memory configurations 75 */ 76 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 77 #define PHYS_SDRAM_1 0x40000000 /* Base address */ 78 #define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */ 79 #define CONFIG_STACKSIZE (128 * 1024) /* 128 KB stack */ 80 #define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ 81 #define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ 82 #define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */ 83 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 84 /* Point initial SP in SRAM so SPL can use it too. */ 85 86 #define CONFIG_SYS_INIT_RAM_ADDR 0x00000000 87 #define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024) 88 89 #define CONFIG_SYS_INIT_SP_OFFSET \ 90 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 91 #define CONFIG_SYS_INIT_SP_ADDR \ 92 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 93 94 /* 95 * We need to sacrifice first 4 bytes of RAM here to avoid triggering some 96 * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot 97 * binary. In case there was more of this mess, 0x100 bytes are skipped. 98 */ 99 #define CONFIG_SYS_TEXT_BASE 0x40000100 100 101 #define CONFIG_ENV_OVERWRITE 102 /* 103 * U-Boot general configurations 104 */ 105 #define CONFIG_SYS_LONGHELP 106 #define CONFIG_SYS_PROMPT "MX28EVK U-Boot > " 107 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ 108 #define CONFIG_SYS_PBSIZE \ 109 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 110 /* Print buffer size */ 111 #define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ 112 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 113 /* Boot argument buffer size */ 114 #define CONFIG_VERSION_VARIABLE /* U-BOOT version */ 115 #define CONFIG_AUTO_COMPLETE /* Command auto complete */ 116 #define CONFIG_CMDLINE_EDITING /* Command history etc */ 117 #define CONFIG_SYS_HUSH_PARSER 118 119 /* 120 * Serial Driver 121 */ 122 #define CONFIG_PL011_SERIAL 123 #define CONFIG_PL011_CLOCK 24000000 124 #define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } 125 #define CONFIG_CONS_INDEX 0 126 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ 127 128 /* 129 * DMA 130 */ 131 #define CONFIG_APBH_DMA 132 133 /* 134 * MMC Driver 135 */ 136 #define CONFIG_ENV_IS_IN_MMC 137 #ifdef CONFIG_ENV_IS_IN_MMC 138 #define CONFIG_ENV_OFFSET (256 * 1024) 139 #define CONFIG_ENV_SIZE (16 * 1024) 140 #define CONFIG_SYS_MMC_ENV_DEV 0 141 #endif 142 #define CONFIG_CMD_SAVEENV 143 #ifdef CONFIG_CMD_MMC 144 #define CONFIG_MMC 145 #define CONFIG_GENERIC_MMC 146 #define CONFIG_MMC_BOUNCE_BUFFER 147 #define CONFIG_MXS_MMC 148 #endif 149 150 /* 151 * NAND Driver 152 */ 153 #ifdef CONFIG_CMD_NAND 154 #define CONFIG_NAND_MXS 155 #define CONFIG_SYS_MAX_NAND_DEVICE 1 156 #define CONFIG_SYS_NAND_BASE 0x60000000 157 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 158 #endif 159 160 /* 161 * Ethernet on SOC (FEC) 162 */ 163 #ifdef CONFIG_CMD_NET 164 #define CONFIG_NET_MULTI 165 #define CONFIG_ETHPRIME "FEC0" 166 #define CONFIG_FEC_MXC 167 #define CONFIG_FEC_MXC_MULTI 168 #define CONFIG_MII 169 #define CONFIG_FEC_XCV_TYPE RMII 170 #define CONFIG_MX28_FEC_MAC_IN_OCOTP 171 #endif 172 173 /* 174 * RTC 175 */ 176 #ifdef CONFIG_CMD_DATE 177 #define CONFIG_RTC_MXS 178 #endif 179 180 /* 181 * USB 182 */ 183 #ifdef CONFIG_CMD_USB 184 #define CONFIG_USB_EHCI 185 #define CONFIG_USB_EHCI_MXS 186 #define CONFIG_EHCI_MXS_PORT 1 187 #define CONFIG_EHCI_IS_TDI 188 #define CONFIG_USB_STORAGE 189 #endif 190 191 /* I2C */ 192 #ifdef CONFIG_CMD_I2C 193 #define CONFIG_I2C_MXS 194 #define CONFIG_HARD_I2C 195 #define CONFIG_SYS_I2C_SPEED 400000 196 #endif 197 198 /* 199 * SPI 200 */ 201 #ifdef CONFIG_CMD_SPI 202 #define CONFIG_HARD_SPI 203 #define CONFIG_MXS_SPI 204 #define CONFIG_SPI_HALF_DUPLEX 205 #define CONFIG_DEFAULT_SPI_BUS 2 206 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 207 208 /* SPI Flash */ 209 #ifdef CONFIG_CMD_SF 210 #define CONFIG_SPI_FLASH 211 #define CONFIG_SF_DEFAULT_BUS 2 212 #define CONFIG_SF_DEFAULT_CS 0 213 /* this may vary and depends on the installed chip */ 214 #define CONFIG_SPI_FLASH_SST 215 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 216 #define CONFIG_SF_DEFAULT_SPEED 24000000 217 218 /* (redundant) environemnt in SPI flash */ 219 #undef CONFIG_ENV_IS_IN_SPI_FLASH 220 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH 221 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 222 #define CONFIG_ENV_SIZE 0x1000 /* 4KB */ 223 #define CONFIG_ENV_OFFSET 0x40000 /* 256K */ 224 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 225 #define CONFIG_ENV_SECT_SIZE 0x1000 226 #define CONFIG_ENV_SPI_CS 0 227 #define CONFIG_ENV_SPI_BUS 2 228 #define CONFIG_ENV_SPI_MAX_HZ 24000000 229 #define CONFIG_ENV_SPI_MODE SPI_MODE_0 230 #endif 231 #endif 232 #endif 233 234 /* 235 * Boot Linux 236 */ 237 #define CONFIG_CMDLINE_TAG 238 #define CONFIG_SETUP_MEMORY_TAGS 239 #define CONFIG_BOOTDELAY 3 240 #define CONFIG_BOOTFILE "uImage" 241 #define CONFIG_BOOTCOMMAND "run bootcmd_net" 242 #define CONFIG_LOADADDR 0x42000000 243 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 244 #define CONFIG_OF_LIBFDT 245 246 /* 247 * Extra Environments 248 */ 249 #define CONFIG_EXTRA_ENV_SETTINGS \ 250 "console_fsl=console=ttyAM0" \ 251 "console_mainline=console=ttyAMA0" \ 252 "netargs=setenv bootargs console=${console_mainline}" \ 253 "root=/dev/nfs " \ 254 "ip=dhcp nfsroot=${serverip}:${nfsroot}\0" \ 255 "bootcmd_net=echo Booting from net ...; " \ 256 "run netargs; " \ 257 "dhcp ${uimage}; bootm\0" \ 258 259 #endif /* __MX28EVK_CONFIG_H__ */ 260