1 /* 2 * (C) Copyright 2011 Freescale Semiconductor, Inc. 3 * Author: Fabio Estevam <fabio.estevam@freescale.com> 4 * 5 * Based on m28evk.h: 6 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> 7 * on behalf of DENX Software Engineering GmbH 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 #ifndef __CONFIGS_MX28EVK_H__ 12 #define __CONFIGS_MX28EVK_H__ 13 14 /* System configurations */ 15 #define CONFIG_MX28 /* i.MX28 SoC */ 16 #define CONFIG_MACH_TYPE MACH_TYPE_MX28EVK 17 18 /* U-Boot Commands */ 19 #define CONFIG_SYS_NO_FLASH 20 #define CONFIG_DISPLAY_CPUINFO 21 #define CONFIG_DOS_PARTITION 22 23 #define CONFIG_CMD_CACHE 24 #define CONFIG_CMD_DATE 25 #define CONFIG_CMD_DHCP 26 #define CONFIG_CMD_FAT 27 #define CONFIG_CMD_GPIO 28 #define CONFIG_CMD_MII 29 #define CONFIG_CMD_MMC 30 #define CONFIG_CMD_PING 31 #define CONFIG_CMD_SF 32 #define CONFIG_CMD_SPI 33 #define CONFIG_CMD_USB 34 #define CONFIG_CMD_BOOTZ 35 #define CONFIG_CMD_NAND 36 #define CONFIG_CMD_NAND_TRIMFFS 37 #define CONFIG_VIDEO 38 39 /* Memory configuration */ 40 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 41 #define PHYS_SDRAM_1 0x40000000 /* Base address */ 42 #define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */ 43 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 44 45 /* Environment */ 46 #ifndef CONFIG_ENV_IS_IN_SPI_FLASH 47 #define CONFIG_ENV_SIZE (16 * 1024) 48 #else 49 #define CONFIG_ENV_SIZE (4 * 1024) 50 #endif 51 #define CONFIG_ENV_OVERWRITE 52 53 /* Environment is in MMC */ 54 #if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC) 55 #define CONFIG_ENV_OFFSET (256 * 1024) 56 #define CONFIG_SYS_MMC_ENV_DEV 0 57 #endif 58 59 /* Environment is in NAND */ 60 #if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND) 61 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 62 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 63 #define CONFIG_ENV_RANGE (512 * 1024) 64 #define CONFIG_ENV_OFFSET 0x300000 65 #define CONFIG_ENV_OFFSET_REDUND \ 66 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) 67 #endif 68 69 /* Environemnt is in SPI flash */ 70 #if defined(CONFIG_CMD_SF) && defined(CONFIG_ENV_IS_IN_SPI_FLASH) 71 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 72 #define CONFIG_ENV_OFFSET 0x40000 /* 256K */ 73 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 74 #define CONFIG_ENV_SECT_SIZE 0x1000 75 #define CONFIG_ENV_SPI_CS 0 76 #define CONFIG_ENV_SPI_BUS 2 77 #define CONFIG_ENV_SPI_MAX_HZ 24000000 78 #define CONFIG_ENV_SPI_MODE SPI_MODE_0 79 #endif 80 81 /* UBI and NAND partitioning */ 82 #ifdef CONFIG_CMD_NAND 83 #define CONFIG_CMD_UBI 84 #define CONFIG_CMD_UBIFS 85 #define CONFIG_CMD_MTDPARTS 86 #define CONFIG_RBTREE 87 #define CONFIG_LZO 88 #define CONFIG_MTD_DEVICE 89 #define CONFIG_MTD_PARTITIONS 90 #define MTDIDS_DEFAULT "nand0=gpmi-nand" 91 #define MTDPARTS_DEFAULT \ 92 "mtdparts=gpmi-nand:" \ 93 "3m(bootloader)ro," \ 94 "512k(environment)," \ 95 "512k(redundant-environment)," \ 96 "4m(kernel)," \ 97 "512k(fdt)," \ 98 "8m(ramdisk)," \ 99 "-(filesystem)" 100 #endif 101 102 /* FEC Ethernet on SoC */ 103 #ifdef CONFIG_CMD_NET 104 #define CONFIG_FEC_MXC 105 #define CONFIG_MX28_FEC_MAC_IN_OCOTP 106 #endif 107 108 /* RTC */ 109 #ifdef CONFIG_CMD_DATE 110 #define CONFIG_RTC_MXS 111 #endif 112 113 /* USB */ 114 #ifdef CONFIG_CMD_USB 115 #define CONFIG_EHCI_MXS_PORT1 116 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 117 #define CONFIG_USB_STORAGE 118 #define CONFIG_USB_HOST_ETHER 119 #define CONFIG_USB_ETHER_ASIX 120 #define CONFIG_USB_ETHER_SMSC95XX 121 #endif 122 123 /* SPI */ 124 #ifdef CONFIG_CMD_SPI 125 #define CONFIG_DEFAULT_SPI_BUS 2 126 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 127 128 /* SPI Flash */ 129 #ifdef CONFIG_CMD_SF 130 #define CONFIG_SF_DEFAULT_BUS 2 131 #define CONFIG_SF_DEFAULT_CS 0 132 /* this may vary and depends on the installed chip */ 133 #define CONFIG_SPI_FLASH_SST 134 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 135 #define CONFIG_SF_DEFAULT_SPEED 24000000 136 #endif 137 138 #endif 139 140 /* Framebuffer support */ 141 #ifdef CONFIG_VIDEO 142 #define CONFIG_VIDEO_LOGO 143 #define CONFIG_SPLASH_SCREEN 144 #define CONFIG_CMD_BMP 145 #define CONFIG_BMP_16BPP 146 #define CONFIG_VIDEO_BMP_RLE8 147 #define CONFIG_VIDEO_BMP_GZIP 148 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) 149 #endif 150 151 /* Boot Linux */ 152 #define CONFIG_BOOTDELAY 1 153 #define CONFIG_BOOTFILE "uImage" 154 #define CONFIG_LOADADDR 0x42000000 155 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 156 157 /* Extra Environment */ 158 #define CONFIG_EXTRA_ENV_SETTINGS \ 159 "ubifs_file=filesystem.ubifs\0" \ 160 "update_nand_full_filename=u-boot.nand\0" \ 161 "update_nand_firmware_filename=u-boot.sb\0" \ 162 "update_nand_firmware_maxsz=0x100000\0" \ 163 "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \ 164 "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \ 165 "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \ 166 "nand device 0 ; " \ 167 "nand info ; " \ 168 "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \ 169 "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \ 170 "update_nand_firmware_full=" /* Update FCB, DBBT and FW */ \ 171 "if tftp ${update_nand_full_filename} ; then " \ 172 "run update_nand_get_fcb_size ; " \ 173 "nand scrub -y 0x0 ${filesize} ; " \ 174 "nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \ 175 "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \ 176 "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \ 177 "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \ 178 "fi\0" \ 179 "update_nand_firmware=" /* Update only firmware */ \ 180 "if tftp ${update_nand_firmware_filename} ; then " \ 181 "run update_nand_get_fcb_size ; " \ 182 "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \ 183 "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \ 184 "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \ 185 "nand erase ${fcb_sz} ${fw_sz} ; " \ 186 "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \ 187 "nand write ${loadaddr} ${fw_off} ${filesize} ; " \ 188 "fi\0" \ 189 "update_nand_kernel=" /* Update kernel */ \ 190 "mtdparts default; " \ 191 "nand erase.part kernel; " \ 192 "if test ${ip_dyn} = yes; then " \ 193 "setenv get_cmd dhcp; " \ 194 "else " \ 195 "setenv get_cmd tftp; " \ 196 "fi; " \ 197 "${get_cmd} ${image}; " \ 198 "nand write ${loadaddr} kernel ${filesize}\0" \ 199 "update_nand_fdt=" /* Update fdt */ \ 200 "mtdparts default; " \ 201 "nand erase.part fdt; " \ 202 "if test ${ip_dyn} = yes; then " \ 203 "setenv get_cmd dhcp; " \ 204 "else " \ 205 "setenv get_cmd tftp; " \ 206 "fi; " \ 207 "${get_cmd} ${fdt_file}; " \ 208 "nand write ${loadaddr} fdt ${filesize}\0" \ 209 "update_nand_filesystem=" /* Update filesystem */ \ 210 "mtdparts default; " \ 211 "nand erase.part filesystem; " \ 212 "if test ${ip_dyn} = yes; then " \ 213 "setenv get_cmd dhcp; " \ 214 "else " \ 215 "setenv get_cmd tftp; " \ 216 "fi; " \ 217 "${get_cmd} ${ubifs_file}; " \ 218 "ubi part filesystem; " \ 219 "ubi create filesystem; " \ 220 "ubi write ${loadaddr} filesystem ${filesize}\0" \ 221 "nandargs=setenv bootargs console=${console_mainline},${baudrate} " \ 222 "rootfstype=ubifs ubi.mtd=6 root=ubi0_0 ${mtdparts}\0" \ 223 "nandboot=" /* Boot from NAND */ \ 224 "mtdparts default; " \ 225 "run nandargs; " \ 226 "nand read ${loadaddr} kernel 0x00400000; " \ 227 "if test ${boot_fdt} = yes; then " \ 228 "nand read ${fdt_addr} fdt 0x00080000; " \ 229 "bootz ${loadaddr} - ${fdt_addr}; " \ 230 "else " \ 231 "if test ${boot_fdt} = no; then " \ 232 "bootz; " \ 233 "else " \ 234 "echo \"ERROR: Set boot_fdt to yes or no.\"; " \ 235 "fi; " \ 236 "fi\0" \ 237 "update_sd_firmware_filename=u-boot.sd\0" \ 238 "update_sd_firmware=" /* Update the SD firmware partition */ \ 239 "if mmc rescan ; then " \ 240 "if tftp ${update_sd_firmware_filename} ; then " \ 241 "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ 242 "setexpr fw_sz ${fw_sz} + 1 ; " \ 243 "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \ 244 "fi ; " \ 245 "fi\0" \ 246 "script=boot.scr\0" \ 247 "image=zImage\0" \ 248 "console_fsl=ttyAM0\0" \ 249 "console_mainline=ttyAMA0\0" \ 250 "fdt_file=imx28-evk.dtb\0" \ 251 "fdt_addr=0x41000000\0" \ 252 "boot_fdt=try\0" \ 253 "ip_dyn=yes\0" \ 254 "mmcdev=0\0" \ 255 "mmcpart=2\0" \ 256 "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ 257 "mmcargs=setenv bootargs console=${console_mainline},${baudrate} " \ 258 "root=${mmcroot}\0" \ 259 "loadbootscript=" \ 260 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 261 "bootscript=echo Running bootscript from mmc ...; " \ 262 "source\0" \ 263 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 264 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 265 "mmcboot=echo Booting from mmc ...; " \ 266 "run mmcargs; " \ 267 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 268 "if run loadfdt; then " \ 269 "bootz ${loadaddr} - ${fdt_addr}; " \ 270 "else " \ 271 "if test ${boot_fdt} = try; then " \ 272 "bootz; " \ 273 "else " \ 274 "echo WARN: Cannot load the DT; " \ 275 "fi; " \ 276 "fi; " \ 277 "else " \ 278 "bootz; " \ 279 "fi;\0" \ 280 "netargs=setenv bootargs console=${console_mainline},${baudrate} " \ 281 "root=/dev/nfs " \ 282 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 283 "netboot=echo Booting from net ...; " \ 284 "run netargs; " \ 285 "if test ${ip_dyn} = yes; then " \ 286 "setenv get_cmd dhcp; " \ 287 "else " \ 288 "setenv get_cmd tftp; " \ 289 "fi; " \ 290 "${get_cmd} ${image}; " \ 291 "if test ${boot_fdt} = yes; then " \ 292 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 293 "bootz ${loadaddr} - ${fdt_addr}; " \ 294 "else " \ 295 "if test ${boot_fdt} = try; then " \ 296 "bootz; " \ 297 "else " \ 298 "echo WARN: Cannot load the DT; " \ 299 "fi;" \ 300 "fi; " \ 301 "else " \ 302 "bootz; " \ 303 "fi;\0" 304 305 #define CONFIG_BOOTCOMMAND \ 306 "mmc dev ${mmcdev}; if mmc rescan; then " \ 307 "if run loadbootscript; then " \ 308 "run bootscript; " \ 309 "else " \ 310 "if run loadimage; then " \ 311 "run mmcboot; " \ 312 "else run netboot; " \ 313 "fi; " \ 314 "fi; " \ 315 "else run netboot; fi" 316 317 /* The rest of the configuration is shared */ 318 #include <configs/mxs.h> 319 320 #endif /* __CONFIGS_MX28EVK_H__ */ 321