xref: /openbmc/u-boot/include/configs/mx25pdk.h (revision 3788b451)
1 /*
2  * (C) Copyright 2011 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9 
10 #include <asm/arch/imx-regs.h>
11 
12 /* High Level Configuration Options */
13 
14 #define CONFIG_MX25
15 #define CONFIG_SYS_TEXT_BASE		0x81200000
16 #define CONFIG_MXC_GPIO
17 #define CONFIG_SYS_FSL_CLK
18 
19 #define CONFIG_SYS_TIMER_RATE		32768
20 #define CONFIG_SYS_TIMER_COUNTER	\
21 	(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
22 
23 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
24 #define CONFIG_SETUP_MEMORY_TAGS
25 #define CONFIG_INITRD_TAG
26 
27 #define CONFIG_MACH_TYPE	MACH_TYPE_MX25_3DS
28 
29 /* Size of malloc() pool */
30 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
31 
32 /* Physical Memory Map */
33 
34 #define CONFIG_NR_DRAM_BANKS	1
35 #define PHYS_SDRAM_1		0x80000000
36 #define PHYS_SDRAM_1_SIZE	(64 * 1024 * 1024)
37 
38 #define CONFIG_BOARD_EARLY_INIT_F
39 
40 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
41 #define CONFIG_SYS_INIT_RAM_ADDR	IMX_RAM_BASE
42 #define CONFIG_SYS_INIT_RAM_SIZE	IMX_RAM_SIZE
43 
44 #define CONFIG_SYS_INIT_SP_OFFSET \
45 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
46 #define CONFIG_SYS_INIT_SP_ADDR \
47 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
48 
49 /* Memory Test */
50 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2)
51 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
52 
53 /* Serial Info */
54 #define CONFIG_MXC_UART
55 #define CONFIG_MXC_UART_BASE	UART1_BASE
56 #define CONFIG_CONS_INDEX	1	/* use UART0 for console */
57 #define CONFIG_BAUDRATE		115200	/* Default baud rate */
58 
59 /* No NOR flash present */
60 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
61 #define CONFIG_ENV_SIZE        (8 * 1024)
62 #define CONFIG_SYS_MMC_ENV_DEV		0
63 
64 #define CONFIG_SYS_NO_FLASH
65 #define CONFIG_ENV_IS_IN_MMC
66 #define CONFIG_SYS_MMC_ENV_DEV 0
67 
68 /* U-Boot general configuration */
69 #define CONFIG_AUTO_COMPLETE
70 #define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */
71 /* Print buffer sz */
72 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
73 		sizeof(CONFIG_SYS_PROMPT) + 16)
74 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
75 /* Boot Argument Buffer Size */
76 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
77 #define CONFIG_CMDLINE_EDITING
78 #define CONFIG_SYS_LONGHELP
79 
80 /* U-Boot commands */
81 
82 /* Ethernet */
83 #define CONFIG_FEC_MXC
84 #define CONFIG_FEC_MXC_PHYADDR		0x1f
85 #define CONFIG_MII
86 #define CONFIG_ENV_OVERWRITE
87 
88 /* ESDHC driver */
89 #define CONFIG_GENERIC_MMC
90 #define CONFIG_FSL_ESDHC
91 #define CONFIG_SYS_FSL_ESDHC_ADDR	IMX_MMC_SDHC1_BASE
92 #define CONFIG_SYS_FSL_ESDHC_NUM	1
93 
94 /* PMIC Configs */
95 #define CONFIG_POWER
96 #define CONFIG_POWER_I2C
97 #define CONFIG_POWER_FSL
98 #define CONFIG_POWER_FSL_MC34704
99 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x54
100 
101 #define CONFIG_DOS_PARTITION
102 
103 /* I2C Configs */
104 #define CONFIG_SYS_I2C
105 #define CONFIG_SYS_I2C_MXC
106 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
107 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
108 
109 /* RTC */
110 #define CONFIG_RTC_IMXDI
111 #define CONFIG_CMD_DATE
112 
113 /* Ethernet Configs */
114 
115 
116 #define CONFIG_LOADADDR		0x81000000	/* loadaddr env var */
117 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
118 
119 #define CONFIG_EXTRA_ENV_SETTINGS \
120 	"script=boot.scr\0" \
121 	"image=zImage\0" \
122 	"console=ttymxc0\0" \
123 	"splashpos=m,m\0" \
124 	"fdt_high=0xffffffff\0" \
125 	"initrd_high=0xffffffff\0" \
126 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
127 	"fdt_addr=0x82000000\0" \
128 	"boot_fdt=try\0" \
129 	"ip_dyn=yes\0" \
130 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
131 	"mmcpart=1\0" \
132 	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
133 	"update_sd_firmware_filename=u-boot.imx\0" \
134 	"update_sd_firmware=" \
135 		"if test ${ip_dyn} = yes; then " \
136 			"setenv get_cmd dhcp; " \
137 		"else " \
138 			"setenv get_cmd tftp; " \
139 		"fi; " \
140 		"if mmc dev ${mmcdev}; then "	\
141 			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
142 				"setexpr fw_sz ${filesize} / 0x200; " \
143 				"setexpr fw_sz ${fw_sz} + 1; "	\
144 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
145 			"fi; "	\
146 		"fi\0" \
147 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
148 		"root=${mmcroot}\0" \
149 	"loadbootscript=" \
150 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
151 	"bootscript=echo Running bootscript from mmc ...; " \
152 		"source\0" \
153 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
154 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
155 	"mmcboot=echo Booting from mmc ...; " \
156 		"run mmcargs; " \
157 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
158 			"if run loadfdt; then " \
159 				"bootz ${loadaddr} - ${fdt_addr}; " \
160 			"else " \
161 				"if test ${boot_fdt} = try; then " \
162 					"bootz; " \
163 				"else " \
164 					"echo WARN: Cannot load the DT; " \
165 				"fi; " \
166 			"fi; " \
167 		"else " \
168 			"bootz; " \
169 		"fi;\0" \
170 	"netargs=setenv bootargs console=${console},${baudrate} " \
171 		"root=/dev/nfs " \
172 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
173 		"netboot=echo Booting from net ...; " \
174 		"run netargs; " \
175 		"if test ${ip_dyn} = yes; then " \
176 			"setenv get_cmd dhcp; " \
177 		"else " \
178 			"setenv get_cmd tftp; " \
179 		"fi; " \
180 		"${get_cmd} ${image}; " \
181 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
182 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
183 				"bootz ${loadaddr} - ${fdt_addr}; " \
184 			"else " \
185 				"if test ${boot_fdt} = try; then " \
186 					"bootz; " \
187 				"else " \
188 					"echo WARN: Cannot load the DT; " \
189 				"fi; " \
190 			"fi; " \
191 		"else " \
192 			"bootz; " \
193 		"fi;\0"
194 
195 #define CONFIG_BOOTCOMMAND \
196 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
197 		   "if run loadbootscript; then " \
198 			   "run bootscript; " \
199 		   "else " \
200 			   "if run loadimage; then " \
201 				   "run mmcboot; " \
202 			   "else run netboot; " \
203 			   "fi; " \
204 		   "fi; " \
205 	   "else run netboot; fi"
206 
207 /* Miscellaneous configurable options */
208 #define CONFIG_SYS_LONGHELP
209 #define CONFIG_AUTO_COMPLETE
210 
211 #define CONFIG_SYS_MAXARGS	       16
212 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
213 
214 #endif /* __CONFIG_H */
215