1 /* 2 * Freescale i.MX23 EVK board config 3 * 4 * Copyright (C) 2013 Otavio Salvador <otavio@ossystems.com.br> 5 * on behalf of O.S. Systems Software LTDA. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 #ifndef __CONFIGS_MX23EVK_H__ 10 #define __CONFIGS_MX23EVK_H__ 11 12 /* System configurations */ 13 #define CONFIG_MX23 /* i.MX23 SoC */ 14 #define CONFIG_MACH_TYPE MACH_TYPE_MX23EVK 15 16 /* U-Boot Commands */ 17 #define CONFIG_SYS_NO_FLASH 18 #include <config_cmd_default.h> 19 #undef CONFIG_CMD_NET 20 #undef CONFIG_CMD_NFS 21 22 #define CONFIG_DISPLAY_CPUINFO 23 #define CONFIG_DOS_PARTITION 24 25 #define CONFIG_CMD_CACHE 26 #define CONFIG_CMD_EXT2 27 #define CONFIG_CMD_FAT 28 #define CONFIG_CMD_GPIO 29 #define CONFIG_CMD_MMC 30 #define CONFIG_CMD_USB 31 #define CONFIG_CMD_BOOTZ 32 #define CONFIG_VIDEO 33 34 /* Memory configuration */ 35 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 36 #define PHYS_SDRAM_1 0x40000000 /* Base address */ 37 #define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */ 38 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 39 40 /* Environment */ 41 #define CONFIG_ENV_OVERWRITE 42 #define CONFIG_ENV_IS_IN_MMC 43 44 /* Environment is in MMC */ 45 #if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC) 46 #define CONFIG_ENV_OFFSET (256 * 1024) 47 #define CONFIG_ENV_SIZE (16 * 1024) 48 #define CONFIG_SYS_MMC_ENV_DEV 0 49 #endif 50 51 /* USB */ 52 #ifdef CONFIG_CMD_USB 53 #define CONFIG_EHCI_MXS_PORT0 54 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 55 #define CONFIG_USB_STORAGE 56 #endif 57 58 /* Framebuffer support */ 59 #ifdef CONFIG_VIDEO 60 #define CONFIG_VIDEO_LOGO 61 #define CONFIG_SPLASH_SCREEN 62 #define CONFIG_CMD_BMP 63 #define CONFIG_BMP_16BPP 64 #define CONFIG_VIDEO_BMP_RLE8 65 #define CONFIG_VIDEO_BMP_GZIP 66 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) 67 #endif 68 69 /* Boot Linux */ 70 #define CONFIG_BOOTDELAY 1 71 #define CONFIG_BOOTFILE "uImage" 72 #define CONFIG_LOADADDR 0x42000000 73 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 74 75 /* Extra Environments */ 76 #define CONFIG_EXTRA_ENV_SETTINGS \ 77 "update_sd_firmware_filename=u-boot.sd\0" \ 78 "update_sd_firmware=" /* Update the SD firmware partition */ \ 79 "if mmc rescan ; then " \ 80 "if tftp ${update_sd_firmware_filename} ; then " \ 81 "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ 82 "setexpr fw_sz ${fw_sz} + 1 ; " \ 83 "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \ 84 "fi ; " \ 85 "fi\0" \ 86 "script=boot.scr\0" \ 87 "uimage=uImage\0" \ 88 "console=ttyAMA0\0" \ 89 "fdt_file=imx23-evk.dtb\0" \ 90 "fdt_addr=0x41000000\0" \ 91 "boot_fdt=try\0" \ 92 "mmcdev=0\0" \ 93 "mmcpart=2\0" \ 94 "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ 95 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 96 "root=${mmcroot}\0" \ 97 "loadbootscript=" \ 98 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 99 "bootscript=echo Running bootscript from mmc ...; " \ 100 "source\0" \ 101 "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ 102 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 103 "mmcboot=echo Booting from mmc ...; " \ 104 "run mmcargs; " \ 105 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 106 "if run loadfdt; then " \ 107 "bootm ${loadaddr} - ${fdt_addr}; " \ 108 "else " \ 109 "if test ${boot_fdt} = try; then " \ 110 "bootm; " \ 111 "else " \ 112 "echo WARN: Cannot load the DT; " \ 113 "fi; " \ 114 "fi; " \ 115 "else " \ 116 "bootm; " \ 117 "fi;\0" 118 119 #define CONFIG_BOOTCOMMAND \ 120 "mmc dev ${mmcdev}; if mmc rescan; then " \ 121 "if run loadbootscript; then " \ 122 "run bootscript; " \ 123 "else " \ 124 "if run loaduimage; then " \ 125 "run mmcboot; " \ 126 "else " \ 127 "echo ERR: Fail to boot from MMC; " \ 128 "fi; " \ 129 "fi; " \ 130 "else exit; fi" 131 132 /* The rest of the configuration is shared */ 133 #include <configs/mxs.h> 134 135 #endif /* __CONFIGS_MX23EVK_H__ */ 136