1 /* 2 * Freescale i.MX23 EVK board config 3 * 4 * Copyright (C) 2013 Otavio Salvador <otavio@ossystems.com.br> 5 * on behalf of O.S. Systems Software LTDA. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 20 * 21 */ 22 #ifndef __MX23EVK_CONFIG_H__ 23 #define __MX23EVK_CONFIG_H__ 24 25 /* SoC configurations */ 26 #define CONFIG_MX23 /* i.MX23 SoC */ 27 28 #include <asm/arch/regs-base.h> 29 30 #define CONFIG_MXS_GPIO /* GPIO control */ 31 #define CONFIG_SYS_HZ 1000 /* Ticks per second */ 32 33 #define CONFIG_MACH_TYPE MACH_TYPE_MX23EVK 34 35 #define CONFIG_SYS_NO_FLASH 36 #define CONFIG_BOARD_EARLY_INIT_F 37 #define CONFIG_ARCH_MISC_INIT 38 39 /* SPL */ 40 #define CONFIG_SPL 41 #define CONFIG_SPL_NO_CPU_SUPPORT_CODE 42 #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" 43 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" 44 #define CONFIG_SPL_LIBCOMMON_SUPPORT 45 #define CONFIG_SPL_LIBGENERIC_SUPPORT 46 #define CONFIG_SPL_GPIO_SUPPORT 47 48 /* U-Boot Commands */ 49 #include <config_cmd_default.h> 50 #undef CONFIG_CMD_NET 51 #undef CONFIG_CMD_NFS 52 53 #define CONFIG_DISPLAY_CPUINFO 54 #define CONFIG_DOS_PARTITION 55 56 #define CONFIG_CMD_CACHE 57 #define CONFIG_CMD_EXT2 58 #define CONFIG_CMD_FAT 59 #define CONFIG_CMD_GPIO 60 #define CONFIG_CMD_MMC 61 #define CONFIG_CMD_USB 62 #define CONFIG_CMD_BOOTZ 63 #define CONFIG_VIDEO 64 65 /* Memory configurations */ 66 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 67 #define PHYS_SDRAM_1 0x40000000 /* Base address */ 68 #define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */ 69 #define CONFIG_STACKSIZE (128 * 1024) /* 128 KB stack */ 70 #define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ 71 #define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ 72 #define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */ 73 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 74 /* Point initial SP in SRAM so SPL can use it too. */ 75 76 #define CONFIG_SYS_INIT_RAM_ADDR 0x00000000 77 #define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024) 78 79 #define CONFIG_SYS_INIT_SP_OFFSET \ 80 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 81 #define CONFIG_SYS_INIT_SP_ADDR \ 82 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 83 84 /* 85 * We need to sacrifice first 4 bytes of RAM here to avoid triggering some 86 * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot 87 * binary. In case there was more of this mess, 0x100 bytes are skipped. 88 */ 89 #define CONFIG_SYS_TEXT_BASE 0x40000100 90 91 #define CONFIG_ENV_OVERWRITE 92 93 /* U-Boot general configurations */ 94 #define CONFIG_SYS_LONGHELP 95 #define CONFIG_SYS_PROMPT "=> " 96 #define CONFIG_SYS_CBSIZE 256 /* Console I/O buffer size */ 97 #define CONFIG_SYS_PBSIZE \ 98 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 99 /* Print buffer size */ 100 #define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ 101 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 102 /* Boot argument buffer size */ 103 #define CONFIG_VERSION_VARIABLE /* U-BOOT version */ 104 #define CONFIG_AUTO_COMPLETE /* Command auto complete */ 105 #define CONFIG_CMDLINE_EDITING /* Command history etc */ 106 #define CONFIG_SYS_HUSH_PARSER 107 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 108 109 /* Serial Driver */ 110 #define CONFIG_PL011_SERIAL 111 #define CONFIG_PL011_CLOCK 24000000 112 #define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } 113 #define CONFIG_CONS_INDEX 0 114 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ 115 116 /* DMA */ 117 #define CONFIG_APBH_DMA 118 119 /* MMC Driver */ 120 #ifdef CONFIG_CMD_MMC 121 #define CONFIG_MMC 122 #define CONFIG_GENERIC_MMC 123 #define CONFIG_BOUNCE_BUFFER 124 #define CONFIG_MXS_MMC 125 #endif 126 127 /* USB */ 128 #ifdef CONFIG_CMD_USB 129 #define CONFIG_USB_EHCI 130 #define CONFIG_USB_EHCI_MXS 131 #define CONFIG_EHCI_MXS_PORT0 132 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 133 #define CONFIG_EHCI_IS_TDI 134 #define CONFIG_USB_STORAGE 135 #endif 136 137 /* Framebuffer support */ 138 #ifdef CONFIG_VIDEO 139 #define CONFIG_CFB_CONSOLE 140 #define CONFIG_VIDEO_MXS 141 #define CONFIG_VIDEO_LOGO 142 #define CONFIG_VIDEO_SW_CURSOR 143 #define CONFIG_VGA_AS_SINGLE_DEVICE 144 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 145 #define CONFIG_SPLASH_SCREEN 146 #define CONFIG_CMD_BMP 147 #define CONFIG_BMP_16BPP 148 #define CONFIG_VIDEO_BMP_RLE8 149 #define CONFIG_VIDEO_BMP_GZIP 150 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) 151 #endif 152 153 /* Boot Linux */ 154 #define CONFIG_CMDLINE_TAG 155 #define CONFIG_SETUP_MEMORY_TAGS 156 #define CONFIG_BOOTDELAY 1 157 #define CONFIG_BOOTFILE "uImage" 158 #define CONFIG_LOADADDR 0x42000000 159 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 160 #define CONFIG_OF_LIBFDT 161 162 /* Environment */ 163 #define CONFIG_ENV_IS_IN_MMC 164 #ifdef CONFIG_ENV_IS_IN_MMC 165 #define CONFIG_ENV_OFFSET (256 * 1024) 166 #define CONFIG_ENV_SIZE (16 * 1024) 167 #define CONFIG_SYS_MMC_ENV_DEV 0 168 #endif 169 170 /* Extra Environments */ 171 #define CONFIG_EXTRA_ENV_SETTINGS \ 172 "update_sd_firmware_filename=u-boot.sd\0" \ 173 "update_sd_firmware=" /* Update the SD firmware partition */ \ 174 "if mmc rescan ; then " \ 175 "if tftp ${update_sd_firmware_filename} ; then " \ 176 "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ 177 "setexpr fw_sz ${fw_sz} + 1 ; " \ 178 "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \ 179 "fi ; " \ 180 "fi\0" \ 181 "script=boot.scr\0" \ 182 "uimage=uImage\0" \ 183 "console=ttyAMA0\0" \ 184 "fdt_file=imx23-evk.dtb\0" \ 185 "fdt_addr=0x41000000\0" \ 186 "boot_fdt=try\0" \ 187 "mmcdev=0\0" \ 188 "mmcpart=2\0" \ 189 "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ 190 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 191 "root=${mmcroot}\0" \ 192 "loadbootscript=" \ 193 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 194 "bootscript=echo Running bootscript from mmc ...; " \ 195 "source\0" \ 196 "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ 197 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 198 "mmcboot=echo Booting from mmc ...; " \ 199 "run mmcargs; " \ 200 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 201 "if run loadfdt; then " \ 202 "bootm ${loadaddr} - ${fdt_addr}; " \ 203 "else " \ 204 "if test ${boot_fdt} = try; then " \ 205 "bootm; " \ 206 "else " \ 207 "echo WARN: Cannot load the DT; " \ 208 "fi; " \ 209 "fi; " \ 210 "else " \ 211 "bootm; " \ 212 "fi;\0" 213 214 #define CONFIG_BOOTCOMMAND \ 215 "mmc dev ${mmcdev}; if mmc rescan; then " \ 216 "if run loadbootscript; then " \ 217 "run bootscript; " \ 218 "else " \ 219 "if run loaduimage; then " \ 220 "run mmcboot; " \ 221 "else " \ 222 "echo ERR: Fail to boot from MMC; " \ 223 "fi; " \ 224 "fi; " \ 225 "else exit; fi" 226 227 #endif /* __MX23EVK_CONFIG_H__ */ 228