1 /*
2  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _CONFIG_MVEBU_ARMADA_8K_H
8 #define _CONFIG_MVEBU_ARMADA_8K_H
9 
10 /*
11  * High Level Configuration Options (easy to change)
12  */
13 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
14 
15 #define CONFIG_DISPLAY_BOARDINFO_LATE
16 
17 #define	CONFIG_SYS_TEXT_BASE	0x00000000
18 
19 /* additions for new ARM relocation support */
20 #define CONFIG_SYS_SDRAM_BASE	0x00000000
21 
22 #define CONFIG_NR_DRAM_BANKS	1
23 
24 /* auto boot */
25 #define CONFIG_PREBOOT
26 
27 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
28 					  115200, 230400, 460800, 921600 }
29 
30 /*
31  * For booting Linux, the board info and command line data
32  * have to be in the first 8 MB of memory, since this is
33  * the maximum mapped by the Linux kernel during initialization.
34  */
35 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
36 #define CONFIG_INITRD_TAG		/* enable INITRD tag */
37 #define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */
38 
39 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
40 #define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
41 		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
42 
43 /*
44  * Size of malloc() pool
45  */
46 #define CONFIG_SYS_MALLOC_LEN	(4 << 20) /* 4MiB for malloc() */
47 
48 /*
49  * Other required minimal configurations
50  */
51 #define CONFIG_SYS_LONGHELP
52 #define CONFIG_AUTO_COMPLETE
53 #define CONFIG_CMDLINE_EDITING
54 #define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
55 #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
56 #define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
57 #define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
58 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
59 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
60 
61 #define CONFIG_SYS_ALT_MEMTEST
62 
63 /* End of 16M scrubbed by training in bootrom */
64 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)
65 
66 /*
67  * SPI Flash configuration
68  */
69 #define CONFIG_KIRKWOOD_SPI
70 #define CONFIG_ENV_SPI_BUS		0
71 #define CONFIG_ENV_SPI_CS		0
72 
73 /* SPI NOR flash default params, used by sf commands */
74 #define CONFIG_SF_DEFAULT_SPEED		1000000
75 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
76 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
77 
78 /* Environment in SPI NOR flash */
79 #ifdef CONFIG_MVEBU_SPI_BOOT
80 /* Environment in NAND flash */
81 #endif
82 
83 #define CONFIG_ENV_OFFSET		0x180000 /* as Marvell U-Boot version */
84 #define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
85 #define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */
86 
87 #define CONFIG_SYS_MAX_NAND_DEVICE	1
88 #define CONFIG_SYS_NAND_MAX_CHIPS	1
89 #define CONFIG_SYS_NAND_ONFI_DETECTION
90 #define CONFIG_SYS_NAND_USE_FLASH_BBT
91 
92 /*
93  * Ethernet Driver configuration
94  */
95 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
96 #define CONFIG_ARP_TIMEOUT	200
97 #define CONFIG_NET_RETRY_COUNT	50
98 
99 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
100 
101 /* USB ethernet */
102 #define CONFIG_USB_HOST_ETHER
103 #define CONFIG_USB_ETHER_ASIX
104 #define CONFIG_USB_ETHER_MCS7830
105 #define CONFIG_USB_ETHER_RTL8152
106 #define CONFIG_USB_ETHER_SMSC95XX
107 
108 /*
109  * SATA/SCSI/AHCI configuration
110  */
111 #define CONFIG_SCSI_AHCI
112 #define CONFIG_SCSI_AHCI_PLAT
113 #define CONFIG_LIBATA
114 #define CONFIG_LBA48
115 #define CONFIG_SYS_64BIT_LBA
116 
117 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
118 #define CONFIG_SYS_SCSI_MAX_LUN		1
119 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
120 					 CONFIG_SYS_SCSI_MAX_LUN)
121 
122 #define CONFIG_SUPPORT_VFAT
123 
124 /*
125  * PCI configuration
126  */
127 #ifdef CONFIG_PCIE_DW_MVEBU
128 #define CONFIG_E1000
129 #endif
130 
131 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */
132