1 /* 2 * Copyright (C) 2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_MVEBU_ARMADA_8K_H 8 #define _CONFIG_MVEBU_ARMADA_8K_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 14 15 #define CONFIG_DISPLAY_BOARDINFO_LATE 16 17 #define CONFIG_SYS_TEXT_BASE 0x00000000 18 19 /* additions for new ARM relocation support */ 20 #define CONFIG_SYS_SDRAM_BASE 0x00000000 21 22 #define CONFIG_NR_DRAM_BANKS 1 23 24 /* auto boot */ 25 #define CONFIG_PREBOOT 26 27 #define CONFIG_BAUDRATE 115200 28 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 29 115200, 230400, 460800, 921600 } 30 31 /* 32 * For booting Linux, the board info and command line data 33 * have to be in the first 8 MB of memory, since this is 34 * the maximum mapped by the Linux kernel during initialization. 35 */ 36 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 37 #define CONFIG_INITRD_TAG /* enable INITRD tag */ 38 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 39 40 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ 41 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 42 +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ 43 44 /* 45 * Size of malloc() pool 46 */ 47 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */ 48 49 /* 50 * Other required minimal configurations 51 */ 52 #define CONFIG_SYS_LONGHELP 53 #define CONFIG_AUTO_COMPLETE 54 #define CONFIG_CMDLINE_EDITING 55 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ 56 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ 57 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ 58 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ 59 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ 60 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 61 62 #define CONFIG_SYS_ALT_MEMTEST 63 64 /* End of 16M scrubbed by training in bootrom */ 65 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) 66 67 /* 68 * SPI Flash configuration 69 */ 70 #define CONFIG_KIRKWOOD_SPI 71 #define CONFIG_ENV_SPI_BUS 0 72 #define CONFIG_ENV_SPI_CS 0 73 74 /* SPI NOR flash default params, used by sf commands */ 75 #define CONFIG_SF_DEFAULT_SPEED 1000000 76 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 77 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 78 79 /* Environment in SPI NOR flash */ 80 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 81 #define CONFIG_ENV_IS_IN_SPI_FLASH 82 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ 83 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 84 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ 85 86 /* USB 2.0 */ 87 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 88 89 /* USB 3.0 */ 90 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3 91 92 #define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \ 93 CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) 94 95 /* USB ethernet */ 96 #define CONFIG_USB_HOST_ETHER 97 #define CONFIG_USB_ETHER_ASIX 98 #define CONFIG_USB_ETHER_MCS7830 99 #define CONFIG_USB_ETHER_RTL8152 100 #define CONFIG_USB_ETHER_SMSC95XX 101 102 /* 103 * SATA/SCSI/AHCI configuration 104 */ 105 #define CONFIG_SCSI 106 #define CONFIG_SCSI_AHCI 107 #define CONFIG_SCSI_AHCI_PLAT 108 #define CONFIG_LIBATA 109 #define CONFIG_LBA48 110 #define CONFIG_SYS_64BIT_LBA 111 112 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 113 #define CONFIG_SYS_SCSI_MAX_LUN 1 114 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 115 CONFIG_SYS_SCSI_MAX_LUN) 116 117 /* MMC/SD IP block */ 118 #define CONFIG_GENERIC_MMC 119 120 #define CONFIG_SUPPORT_VFAT 121 122 /* 123 * PCI configuration 124 */ 125 #ifdef CONFIG_PCIE_DW_MVEBU 126 #define CONFIG_E1000 127 #define CONFIG_CMD_PCI 128 #endif 129 130 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */ 131