1 /*
2  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _CONFIG_MVEBU_ARMADA_8K_H
8 #define _CONFIG_MVEBU_ARMADA_8K_H
9 
10 /*
11  * High Level Configuration Options (easy to change)
12  */
13 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
14 
15 #define CONFIG_DISPLAY_BOARDINFO_LATE
16 
17 #define	CONFIG_SYS_TEXT_BASE	0x00000000
18 
19 /* additions for new ARM relocation support */
20 #define CONFIG_SYS_SDRAM_BASE	0x00000000
21 
22 #define CONFIG_NR_DRAM_BANKS	1
23 
24 /* auto boot */
25 #define CONFIG_PREBOOT
26 
27 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
28 					  115200, 230400, 460800, 921600 }
29 
30 /*
31  * For booting Linux, the board info and command line data
32  * have to be in the first 8 MB of memory, since this is
33  * the maximum mapped by the Linux kernel during initialization.
34  */
35 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
36 #define CONFIG_INITRD_TAG		/* enable INITRD tag */
37 #define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */
38 
39 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
40 
41 /*
42  * Size of malloc() pool
43  */
44 #define CONFIG_SYS_MALLOC_LEN	(4 << 20) /* 4MiB for malloc() */
45 
46 /*
47  * Other required minimal configurations
48  */
49 #define CONFIG_SYS_LONGHELP
50 #define CONFIG_AUTO_COMPLETE
51 #define CONFIG_CMDLINE_EDITING
52 #define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
53 #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
54 #define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
55 #define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
56 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
57 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
58 
59 #define CONFIG_SYS_ALT_MEMTEST
60 
61 /* End of 16M scrubbed by training in bootrom */
62 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)
63 
64 /*
65  * SPI Flash configuration
66  */
67 #define CONFIG_KIRKWOOD_SPI
68 #define CONFIG_ENV_SPI_BUS		0
69 #define CONFIG_ENV_SPI_CS		0
70 
71 /* SPI NOR flash default params, used by sf commands */
72 #define CONFIG_SF_DEFAULT_SPEED		1000000
73 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
74 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
75 
76 /* Environment in SPI NOR flash */
77 #ifdef CONFIG_MVEBU_SPI_BOOT
78 /* Environment in NAND flash */
79 #endif
80 
81 #define CONFIG_ENV_OFFSET		0x180000 /* as Marvell U-Boot version */
82 #define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
83 #define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */
84 
85 #define CONFIG_SYS_MAX_NAND_DEVICE	1
86 #define CONFIG_SYS_NAND_MAX_CHIPS	1
87 #define CONFIG_SYS_NAND_ONFI_DETECTION
88 #define CONFIG_SYS_NAND_USE_FLASH_BBT
89 
90 /*
91  * Ethernet Driver configuration
92  */
93 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
94 #define CONFIG_ARP_TIMEOUT	200
95 #define CONFIG_NET_RETRY_COUNT	50
96 
97 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
98 
99 /* USB ethernet */
100 
101 /*
102  * SATA/SCSI/AHCI configuration
103  */
104 #define CONFIG_SCSI_AHCI
105 #define CONFIG_SCSI_AHCI_PLAT
106 #define CONFIG_LIBATA
107 #define CONFIG_LBA48
108 #define CONFIG_SYS_64BIT_LBA
109 
110 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
111 #define CONFIG_SYS_SCSI_MAX_LUN		1
112 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
113 					 CONFIG_SYS_SCSI_MAX_LUN)
114 
115 #define CONFIG_SUPPORT_VFAT
116 
117 /*
118  * PCI configuration
119  */
120 #ifdef CONFIG_PCIE_DW_MVEBU
121 #define CONFIG_E1000
122 #endif
123 
124 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */
125