1 /* 2 * Copyright (C) 2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_MVEBU_ARMADA_8K_H 8 #define _CONFIG_MVEBU_ARMADA_8K_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 14 15 #define CONFIG_DISPLAY_BOARDINFO_LATE 16 #define CONFIG_ARCH_EARLY_INIT_R 17 18 #define CONFIG_SYS_TEXT_BASE 0x00000000 19 20 /* additions for new ARM relocation support */ 21 #define CONFIG_SYS_SDRAM_BASE 0x00000000 22 23 #define CONFIG_NR_DRAM_BANKS 1 24 25 /* auto boot */ 26 #define CONFIG_PREBOOT 27 28 #define CONFIG_BAUDRATE 115200 29 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 30 115200, 230400, 460800, 921600 } 31 32 /* 33 * For booting Linux, the board info and command line data 34 * have to be in the first 8 MB of memory, since this is 35 * the maximum mapped by the Linux kernel during initialization. 36 */ 37 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 38 #define CONFIG_INITRD_TAG /* enable INITRD tag */ 39 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 40 41 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ 42 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 43 +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ 44 45 /* 46 * Size of malloc() pool 47 */ 48 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */ 49 50 /* 51 * Other required minimal configurations 52 */ 53 #define CONFIG_SYS_LONGHELP 54 #define CONFIG_AUTO_COMPLETE 55 #define CONFIG_CMDLINE_EDITING 56 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ 57 #define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ 58 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ 59 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ 60 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ 61 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ 62 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 63 64 #define CONFIG_SYS_ALT_MEMTEST 65 66 /* End of 16M scrubbed by training in bootrom */ 67 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) 68 69 /* 70 * SPI Flash configuration 71 */ 72 #define CONFIG_KIRKWOOD_SPI 73 #define CONFIG_ENV_SPI_BUS 0 74 #define CONFIG_ENV_SPI_CS 0 75 76 /* SPI NOR flash default params, used by sf commands */ 77 #define CONFIG_SF_DEFAULT_SPEED 1000000 78 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 79 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 80 81 /* Environment in SPI NOR flash */ 82 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 83 #define CONFIG_ENV_IS_IN_SPI_FLASH 84 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ 85 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 86 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ 87 88 /* USB 2.0 */ 89 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 90 91 /* USB 3.0 */ 92 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3 93 94 #define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \ 95 CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) 96 97 /* USB ethernet */ 98 #define CONFIG_USB_HOST_ETHER 99 #define CONFIG_USB_ETHER_ASIX 100 #define CONFIG_USB_ETHER_MCS7830 101 #define CONFIG_USB_ETHER_RTL8152 102 #define CONFIG_USB_ETHER_SMSC95XX 103 104 /* 105 * SATA/SCSI/AHCI configuration 106 */ 107 #define CONFIG_SCSI 108 #define CONFIG_SCSI_AHCI 109 #define CONFIG_SCSI_AHCI_PLAT 110 #define CONFIG_LIBATA 111 #define CONFIG_LBA48 112 #define CONFIG_SYS_64BIT_LBA 113 114 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 115 #define CONFIG_SYS_SCSI_MAX_LUN 1 116 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 117 CONFIG_SYS_SCSI_MAX_LUN) 118 119 #define CONFIG_SUPPORT_VFAT 120 121 /* DISK Partition support */ 122 #define CONFIG_EFI_PARTITION 123 #define CONFIG_DOS_PARTITION 124 #define CONFIG_MAC_PARTITION 125 #define CONFIG_ISO_PARTITION /* Experimental */ 126 127 #define CONFIG_CMD_PART 128 #define CONFIG_PARTITION_UUIDS 129 130 /* 131 * PCI configuration 132 */ 133 #ifdef CONFIG_PCIE_DW_MVEBU 134 #define CONFIG_E1000 135 #define CONFIG_CMD_PCI 136 #endif 137 138 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */ 139