1 /* 2 * Copyright (C) 2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_MVEBU_ARMADA_8K_H 8 #define _CONFIG_MVEBU_ARMADA_8K_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 14 15 #define CONFIG_DISPLAY_BOARDINFO_LATE 16 17 #define CONFIG_SYS_TEXT_BASE 0x00000000 18 19 /* additions for new ARM relocation support */ 20 #define CONFIG_SYS_SDRAM_BASE 0x00000000 21 22 #define CONFIG_NR_DRAM_BANKS 1 23 24 /* auto boot */ 25 #define CONFIG_PREBOOT 26 27 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 28 115200, 230400, 460800, 921600 } 29 30 /* 31 * For booting Linux, the board info and command line data 32 * have to be in the first 8 MB of memory, since this is 33 * the maximum mapped by the Linux kernel during initialization. 34 */ 35 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 36 #define CONFIG_INITRD_TAG /* enable INITRD tag */ 37 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 38 39 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ 40 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 41 +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ 42 43 /* 44 * Size of malloc() pool 45 */ 46 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */ 47 48 /* 49 * Other required minimal configurations 50 */ 51 #define CONFIG_SYS_LONGHELP 52 #define CONFIG_AUTO_COMPLETE 53 #define CONFIG_CMDLINE_EDITING 54 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ 55 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ 56 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ 57 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ 58 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ 59 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 60 61 #define CONFIG_SYS_ALT_MEMTEST 62 63 /* End of 16M scrubbed by training in bootrom */ 64 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) 65 66 /* 67 * SPI Flash configuration 68 */ 69 #define CONFIG_KIRKWOOD_SPI 70 #define CONFIG_ENV_SPI_BUS 0 71 #define CONFIG_ENV_SPI_CS 0 72 73 /* SPI NOR flash default params, used by sf commands */ 74 #define CONFIG_SF_DEFAULT_SPEED 1000000 75 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 76 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 77 78 /* Environment in SPI NOR flash */ 79 #define CONFIG_ENV_IS_IN_SPI_FLASH 80 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ 81 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 82 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ 83 84 /* USB 2.0 */ 85 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 86 87 /* USB 3.0 */ 88 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3 89 90 #define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \ 91 CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) 92 93 /* USB ethernet */ 94 #define CONFIG_USB_HOST_ETHER 95 #define CONFIG_USB_ETHER_ASIX 96 #define CONFIG_USB_ETHER_MCS7830 97 #define CONFIG_USB_ETHER_RTL8152 98 #define CONFIG_USB_ETHER_SMSC95XX 99 100 /* 101 * SATA/SCSI/AHCI configuration 102 */ 103 #define CONFIG_SCSI 104 #define CONFIG_SCSI_AHCI 105 #define CONFIG_SCSI_AHCI_PLAT 106 #define CONFIG_LIBATA 107 #define CONFIG_LBA48 108 #define CONFIG_SYS_64BIT_LBA 109 110 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 111 #define CONFIG_SYS_SCSI_MAX_LUN 1 112 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 113 CONFIG_SYS_SCSI_MAX_LUN) 114 115 #define CONFIG_SUPPORT_VFAT 116 117 /* 118 * PCI configuration 119 */ 120 #ifdef CONFIG_PCIE_DW_MVEBU 121 #define CONFIG_E1000 122 #define CONFIG_CMD_PCI 123 #endif 124 125 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */ 126