1 /* 2 * Copyright (C) 2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_MVEBU_ARMADA_8K_H 8 #define _CONFIG_MVEBU_ARMADA_8K_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 14 15 #define CONFIG_DISPLAY_BOARDINFO_LATE 16 17 #define CONFIG_SYS_TEXT_BASE 0x00000000 18 19 /* additions for new ARM relocation support */ 20 #define CONFIG_SYS_SDRAM_BASE 0x00000000 21 22 #define CONFIG_NR_DRAM_BANKS 1 23 24 /* auto boot */ 25 #define CONFIG_PREBOOT 26 27 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 28 115200, 230400, 460800, 921600 } 29 30 /* 31 * For booting Linux, the board info and command line data 32 * have to be in the first 8 MB of memory, since this is 33 * the maximum mapped by the Linux kernel during initialization. 34 */ 35 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 36 #define CONFIG_INITRD_TAG /* enable INITRD tag */ 37 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 38 39 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ 40 41 /* 42 * Size of malloc() pool 43 */ 44 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */ 45 46 /* 47 * Other required minimal configurations 48 */ 49 #define CONFIG_SYS_LONGHELP 50 #define CONFIG_AUTO_COMPLETE 51 #define CONFIG_CMDLINE_EDITING 52 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ 53 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ 54 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ 55 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ 56 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ 57 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 58 59 #define CONFIG_SYS_ALT_MEMTEST 60 61 /* End of 16M scrubbed by training in bootrom */ 62 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) 63 64 /* 65 * SPI Flash configuration 66 */ 67 #define CONFIG_KIRKWOOD_SPI 68 #define CONFIG_ENV_SPI_BUS 0 69 #define CONFIG_ENV_SPI_CS 0 70 71 /* SPI NOR flash default params, used by sf commands */ 72 #define CONFIG_SF_DEFAULT_SPEED 1000000 73 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 74 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 75 76 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ 77 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 78 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ 79 80 #define CONFIG_SYS_MAX_NAND_DEVICE 1 81 #define CONFIG_SYS_NAND_MAX_CHIPS 1 82 #define CONFIG_SYS_NAND_ONFI_DETECTION 83 #define CONFIG_SYS_NAND_USE_FLASH_BBT 84 85 /* 86 * Ethernet Driver configuration 87 */ 88 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ 89 #define CONFIG_ARP_TIMEOUT 200 90 #define CONFIG_NET_RETRY_COUNT 50 91 92 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3) 93 94 /* USB ethernet */ 95 96 /* 97 * SATA/SCSI/AHCI configuration 98 */ 99 #define CONFIG_SCSI_AHCI_PLAT 100 #define CONFIG_LBA48 101 #define CONFIG_SYS_64BIT_LBA 102 103 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 104 #define CONFIG_SYS_SCSI_MAX_LUN 1 105 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 106 CONFIG_SYS_SCSI_MAX_LUN) 107 108 /* 109 * PCI configuration 110 */ 111 #ifdef CONFIG_PCIE_DW_MVEBU 112 #define CONFIG_E1000 113 #endif 114 115 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */ 116